- A
Enable port security on the leaf switch interfaces.
Why wrong: Port security does not encrypt traffic.
- B
Use a contract with the 'encrypt' flag enabled between the EPGs.
ACI contracts support encryption enforcement using MACsec or IPsec.
- C
Create separate VRFs for each EPG and route traffic through a firewall.
Why wrong: Adds complexity but not native encryption.
- D
Configure a site-to-site VPN between the leaf switches.
Why wrong: VPN is for external connectivity, not internal.
Quick Answer
The correct answer is to use a contract with the 'encrypt' flag enabled between the EPGs. This is because Cisco ACI’s built-in encryption capability applies AES-256-GCM at the leaf switch level, ensuring data confidentiality for traffic between EPGs within the same tenant without requiring external appliances or routing changes, directly meeting PCI DSS requirements. On the Cisco DCCOR / CCNP Data Center Core 350-601 exam, this question tests your understanding of ACI’s native security features versus more complex alternatives like IPsec tunnels or external firewalls—a common trap is assuming encryption requires external hardware or that it only works across tenants. Remember that the encrypt flag is a contract-level toggle, not a per-EPG setting, so think of it as a “seal” on the contract itself. Memory tip: “Encrypt the contract, not the EPG” to avoid overcomplicating the solution.
350-601 Security Practice Question
This 350-601 practice question tests your understanding of security. Read the scenario carefully and evaluate each option against the stated constraints before committing to an answer. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.
A data center architect is designing security for a Cisco ACI fabric that must comply with PCI DSS. The requirement is to encrypt all traffic between EPGs within the same tenant. Which solution should be used?
Answer choices
Why each option matters
Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.
Correct answer & explanation
Use a contract with the 'encrypt' flag enabled between the EPGs.
Option B is correct because Cisco ACI supports encryption of traffic between EPGs within the same tenant using a contract with the 'encrypt' flag enabled. This leverages the ACI fabric's built-in capability to apply AES-based encryption (e.g., AES-256-GCM) at the leaf switch level, ensuring data confidentiality for PCI DSS compliance without requiring external devices or complex routing changes.
Key principle: Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option.
Answer analysis
Option-by-option breakdown
For each option: why learners choose it and why it is or isn't the right answer here.
- ✗
Enable port security on the leaf switch interfaces.
Why it's wrong here
Port security does not encrypt traffic.
- ✓
Use a contract with the 'encrypt' flag enabled between the EPGs.
Why this is correct
ACI contracts support encryption enforcement using MACsec or IPsec.
Related concept
Read the scenario before looking for a memorised answer.
- ✗
Create separate VRFs for each EPG and route traffic through a firewall.
Why it's wrong here
Adds complexity but not native encryption.
- ✗
Configure a site-to-site VPN between the leaf switches.
Why it's wrong here
VPN is for external connectivity, not internal.
Common exam traps
Common exam trap: answer the scenario, not the keyword
The trap here is that candidates may assume encryption requires an external firewall or VPN, but Cisco ACI natively supports contract-based encryption using MACsec, which is the correct and simplest solution for intra-tenant EPG traffic encryption.
Detailed technical explanation
How to think about this question
The 'encrypt' flag in an ACI contract triggers the fabric to use MACsec (IEEE 802.1AE) or a similar encryption mechanism between leaf switches for the specified traffic flows. This encryption is transparent to endpoints and operates at Layer 2, ensuring that even if an attacker gains physical access to the fabric links, the data remains confidential. In real-world PCI DSS deployments, this allows segmentation and encryption of cardholder data within a single tenant without the overhead of traditional VPNs or firewalls.
KKey Concepts to Remember
- Read the scenario before looking for a memorised answer.
- Find the constraint that changes the correct option.
- Eliminate answers that are true in general but not in this case.
TExam Day Tips
- Watch for words such as best, first, most likely and least administrative effort.
- Review why wrong options are wrong, not only why the correct option is correct.
Key takeaway
Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option.
Real-world example
How this comes up in practice
A practitioner preparing for the 350-601 exam encounters this exact type of scenario on the job. The correct answer here is not the most general option — it is the best answer for the specific constraint described. Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option. Real exam questions reward reading the full scenario before eliminating options, because the constraint defines which answer fits.
What to study next
Got this wrong? Here's your next step.
Identify which exam domain this question belongs to, review the core concept, then practise similar questions from the same domain.
- →
Security — study guide chapter
Learn the concepts, then practise the questions
- →
Security practice questions
Targeted practice on this topic area only
- →
All 350-601 questions
500 questions across all exam domains
- →
Cisco DCCOR / CCNP Data Center Core 350-601 study guide
Full concept coverage aligned to exam objectives
- →
350-601 practice test guide
How to use practice tests most effectively before exam day
Related practice questions
Related 350-601 practice-question pages
Use these pages to review the topic behind this question. This is how one missed question becomes focused revision.
Network practice questions
Practise 350-601 questions linked to Network.
Compute practice questions
Practise 350-601 questions linked to Compute.
Storage Network practice questions
Practise 350-601 questions linked to Storage Network.
Automation practice questions
Practise 350-601 questions linked to Automation.
Security practice questions
Practise 350-601 questions linked to Security.
350-601 fundamentals practice questions
Practise 350-601 questions linked to 350-601 fundamentals.
350-601 scenario practice questions
Practise 350-601 questions linked to 350-601 scenario.
350-601 troubleshooting practice questions
Practise 350-601 questions linked to 350-601 troubleshooting.
Practice this exam
Start a free 350-601 practice session
Short sessions build daily habit. Longer sessions build exam-day stamina. Try a timed session to simulate real conditions.
FAQ
Questions learners often ask
What does this 350-601 question test?
Security — This question tests Security — Read the scenario before looking for a memorised answer..
What is the correct answer to this question?
The correct answer is: Use a contract with the 'encrypt' flag enabled between the EPGs. — Option B is correct because Cisco ACI supports encryption of traffic between EPGs within the same tenant using a contract with the 'encrypt' flag enabled. This leverages the ACI fabric's built-in capability to apply AES-based encryption (e.g., AES-256-GCM) at the leaf switch level, ensuring data confidentiality for PCI DSS compliance without requiring external devices or complex routing changes.
What should I do if I get this 350-601 question wrong?
Identify which exam domain this question belongs to, review the core concept, then practise similar questions from the same domain.
What is the key concept behind this question?
Read the scenario before looking for a memorised answer.
About these practice questions
Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →
Keep practising
More 350-601 practice questions
- Refer to the exhibit. The interface fc1/1 is configured as an E_port. The connected switch also has an E_port configured…
- Refer to the exhibit. After applying this configuration, the engineer activates the zoneset with 'zoneset activate name…
- A network engineer is troubleshooting a slow backup performance between a backup server and a tape library connected via…
- A data center engineer is deploying a new application on Cisco UCS Manager. The application requires consistent low-late…
- Which TWO are valid methods to configure a Cisco UCS service profile for stateless computing? (Choose two.)
- A data center engineer notices that a UCS B-Series blade server is failing to boot from a SAN LUN that is correctly mapp…
Last reviewed: Jun 11, 2026
This 350-601 practice question is part of Courseiva's free Cisco certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the 350-601 exam.
Question Discussion
Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.
Sign in to join the discussion.