The answer is to create separate service profile templates for each hypervisor. This is the best practice because VMware vSphere and Microsoft Hyper-V have fundamentally different boot and storage configuration requirements—vSphere often uses SAN boot with specific firmware settings, while Hyper-V may rely on local disk or different boot policies—and distinct templates prevent configuration conflicts when deploying UCS Mini compute resources for both hypervisors in the same domain. On the Cisco DCCOR / CCNP Data Center Core 350-601 exam, this concept tests your understanding of service profile template design for multi-hypervisor environments, often appearing in a scenario where a single template is mistakenly reused; the common trap is assuming a unified template can handle both, but the key is that each hypervisor’s vNIC/vHBA and firmware settings must be isolated. Remember the memory tip: “One hypervisor, one template—don’t mix boot policies or you’ll break the link.”
350-601 Compute Practice Question
This 350-601 practice question tests your understanding of compute. This is a configuration task: choose the command set that satisfies every stated requirement. Small differences — like 'secret' vs 'password' or 'transport input ssh' vs 'all' — change whether the answer is correct. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.
A company is deploying a Cisco UCS Mini in a remote office. They need to support both VMware vSphere and Microsoft Hyper-V on the same UCS domain. What is the best practice for deploying compute resources for both hypervisors?
Clue words in this question
Noticing these words before you look at the options changes how you read each choice.
Clue: "best"
Why it matters: Signals that multiple options may be partially correct. Choose the option that most directly solves the exact problem described, not the one that sounds most complete.
Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.
Correct answer & explanation
✓
Create separate service profile templates for each hypervisor
Separate service profile templates are required because VMware vSphere and Microsoft Hyper-V have different boot and storage configuration requirements. Each hypervisor needs its own boot policy (e.g., SAN boot vs. local disk), firmware settings, and potentially different vNIC/vHBA configurations. Using distinct templates ensures that each hypervisor's compute resources are correctly provisioned without conflicts.
Key principle: Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option.
Answer analysis
Option-by-option breakdown
For each option: why learners choose it and why it is or isn't the right answer here.
✓
Create separate service profile templates for each hypervisor
Why this is correct
Separate templates enable boot order, firmware, and BIOS settings per hypervisor.
Clue confirmation
The clue word "best" in the question point toward this answer.
Related concept
Read the scenario before looking for a memorised answer.
✗
Use a single service profile but assign different VLANs for management traffic
Common exam trap: answer the scenario, not the keyword
Cisco often tests the misconception that VLANs or identity pools alone can differentiate hypervisor configurations, when in fact the core differences lie in boot and storage policies that require separate service profile templates.
Detailed technical explanation
How to think about this question
Service profile templates in UCS Manager define the complete server personality, including boot order (e.g., local disk vs. SAN), firmware management (host firmware package), and storage policies (e.g., local RAID configuration). VMware vSphere typically uses SAN boot with specific HBA driver requirements, while Hyper-V often boots from local disks with different RAID levels. Creating separate templates allows each hypervisor to have its own boot policy, firmware bundle, and storage profile, ensuring compatibility and optimal performance.
KKey Concepts to Remember
Read the scenario before looking for a memorised answer.
Find the constraint that changes the correct option.
Eliminate answers that are true in general but not in this case.
TExam Day Tips
→Watch for words such as best, first, most likely and least administrative effort.
→Review why wrong options are wrong, not only why the correct option is correct.
Key takeaway
Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option.
Real-world example
How this comes up in practice
A help-desk technician troubleshoots why a newly connected PC cannot reach shared printers on the same floor. The cable is good, the switch port is active, but the PC is in VLAN 20 and the printers are in VLAN 10. The uplink trunk only allows VLAN 10. A trunk being up does not mean every VLAN crosses it.
What to study next
Got this wrong? Here's your next step.
Identify which exam domain this question belongs to, review the core concept, then practise similar questions from the same domain.
Compute — This question tests Compute — Read the scenario before looking for a memorised answer..
What is the correct answer to this question?
The correct answer is: Create separate service profile templates for each hypervisor — Separate service profile templates are required because VMware vSphere and Microsoft Hyper-V have different boot and storage configuration requirements. Each hypervisor needs its own boot policy (e.g., SAN boot vs. local disk), firmware settings, and potentially different vNIC/vHBA configurations. Using distinct templates ensures that each hypervisor's compute resources are correctly provisioned without conflicts.
What should I do if I get this 350-601 question wrong?
Identify which exam domain this question belongs to, review the core concept, then practise similar questions from the same domain.
Are there clue words in this question I should notice?
Yes — watch for: "best". Signals that multiple options may be partially correct. Choose the option that most directly solves the exact problem described, not the one that sounds most complete.
What is the key concept behind this question?
Read the scenario before looking for a memorised answer.
About these practice questions
Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →
Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.
This 350-601 practice question is part of Courseiva's free Cisco certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the 350-601 exam.
Question Discussion
Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.
Sign in to join the discussion.