Drag steps to the numbered slots on the right, or tap a step then tap a slot.
Steps
Order
1Step 1
2Step 2
3Step 3
4Step 4
5Step 5
mediumDrag & DropObjective-mapped
CCNP Practice Question: Drag and drop the steps of 4G/LTE WAN failover…
Drag and drop the steps of 4G/LTE WAN failover with IP SLA tracking into the correct order, from first to last.
Answer choices
Why each option matters
Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.
Correct answer & explanation
✓
Configure primary WAN and LTE interfaces
First, configure the primary WAN interface and the LTE backup interface. Then, create an IP SLA probe to monitor the primary link. Track the SLA with a tracking object. Set a static route with a higher metric for the LTE interface, tied to the track. When the primary fails, the track goes down, and the LTE route becomes active.
About these practice questions
Courseiva writes every 350-401 question from scratch — 1,175 in total, each with an explanation and a wrong-answer breakdown. None are copied from real exams or dumps. Learn why practice questions differ from exam dumps →
Same concept, more angles
1 more way this is tested on 350-401
These questions test the same concept from different angles. Work through them to make sure you can recognise it however the exam phrases it.
Variation 1. Drag and drop the steps of 4G/LTE WAN failover with IP SLA tracking into the correct order, from first to last.
medium- ✓ A.Configure IP SLA probe to monitor primary WAN
- ✓ B.Associate probe with tracking object
- ✓ C.Configure backup static route with higher metric for LTE
- ✓ D.Remove primary route when tracking object goes down
- ✓ E.Reroute traffic through LTE interface
Why A: For 4G/LTE WAN failover using IP SLA, first an IP SLA probe is configured to monitor the primary WAN link, then the probe is associated with a tracking object, a backup static route with a higher metric is configured for the LTE interface, the primary route is removed when the tracking object goes down, and finally traffic is rerouted through the LTE interface. The correct order is: configure IP SLA probe to monitor primary WAN, associate probe with tracking object, configure backup static route with higher metric for LTE, remove primary route when tracking object goes down, reroute traffic through LTE interface.
JA
Written by Johnson Ajibi, MSc IT Security
Senior Network & Security Engineer · founder of Courseiva
This 350-401 practice question is part of Courseiva's free Cisco certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the 350-401 exam.