- A
NAT64 translates IPv6 packets to IPv4 packets and vice versa, allowing IPv6-only clients to access IPv4 servers.
Correct because NAT64 performs protocol translation between IPv6 and IPv4, enabling communication between IPv6-only and IPv4-only hosts.
- B
NPTv6 (Network Prefix Translation) translates the IPv6 prefix of a packet while preserving the host portion of the address.
Correct because NPTv6 is a stateless prefix translation that changes the network prefix but keeps the interface identifier unchanged.
- C
NAT64 requires a DNS64 server to synthesize AAAA records from A records for IPv6 clients.
Correct because DNS64 is typically used with NAT64 to map IPv4 addresses to IPv6 addresses so that IPv6 clients can resolve domain names.
- D
NPTv6 provides port address translation similar to PAT in IPv4 NAT.
Why wrong: Incorrect because NPTv6 is stateless and does not perform port translation; it only translates prefixes, not ports.
- E
Both NAT64 and NPTv6 require stateful inspection of all traffic flows.
Why wrong: Incorrect because NAT64 is stateful (tracks sessions), but NPTv6 is stateless and does not maintain session state.
CCNP NAT and DHCP Practice Question
This 350-401 practice question tests your understanding of nat and dhcp. Read the scenario carefully and evaluate each option against the stated constraints before committing to an answer. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.
Which three statements about NAT64 and NPTv6 are true? (Choose three.)
Answer choices
Why each option matters
Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.
Correct answer & explanation
NAT64 translates IPv6 packets to IPv4 packets and vice versa, allowing IPv6-only clients to access IPv4 servers.
This question tests understanding of IPv6 transition mechanisms, specifically NAT64 and NPTv6, including their differences and use cases.
Key principle: Authentication proves identity; authorization controls what that identity can do after login. Both must work for full privileged access.
Answer analysis
Option-by-option breakdown
For each option: why learners choose it and why it is or isn't the right answer here.
- ✓
NAT64 translates IPv6 packets to IPv4 packets and vice versa, allowing IPv6-only clients to access IPv4 servers.
Why this is correct
Correct because NAT64 performs protocol translation between IPv6 and IPv4, enabling communication between IPv6-only and IPv4-only hosts.
Related concept
Authentication checks who the user is.
- ✓
NPTv6 (Network Prefix Translation) translates the IPv6 prefix of a packet while preserving the host portion of the address.
Why this is correct
Correct because NPTv6 is a stateless prefix translation that changes the network prefix but keeps the interface identifier unchanged.
Related concept
Authentication checks who the user is.
- ✓
NAT64 requires a DNS64 server to synthesize AAAA records from A records for IPv6 clients.
Why this is correct
Correct because DNS64 is typically used with NAT64 to map IPv4 addresses to IPv6 addresses so that IPv6 clients can resolve domain names.
Related concept
Authentication checks who the user is.
- ✗
NPTv6 provides port address translation similar to PAT in IPv4 NAT.
Why it's wrong here
Incorrect because NPTv6 is stateless and does not perform port translation; it only translates prefixes, not ports.
- ✗
Both NAT64 and NPTv6 require stateful inspection of all traffic flows.
Why it's wrong here
Incorrect because NAT64 is stateful (tracks sessions), but NPTv6 is stateless and does not maintain session state.
Common exam traps
Common exam trap: authentication is not authorization
Logging in proves the user can authenticate. It does not automatically mean the user is allowed to enter privileged or configuration mode. Watch for AAA authorization, privilege level and command authorization details.
Detailed technical explanation
How to think about this question
This kind of question is testing the difference between identity and permission. A user may successfully log in to a router because authentication is working, but still fail to enter configuration mode because authorization is missing, misconfigured or mapped to a lower privilege level.
KKey Concepts to Remember
- Authentication checks who the user is.
- Authorization controls what the user is allowed to do after login.
- Privilege levels affect access to EXEC and configuration commands.
- AAA, TACACS+ and RADIUS can separate login success from command access.
TExam Day Tips
- Do not assume successful login means full administrative access.
- Look for words such as cannot enter configuration mode, privilege level, authorization or command access.
- Separate login problems from permission problems before choosing the answer.
Key takeaway
Authentication proves identity; authorization controls what that identity can do after login. Both must work for full privileged access.
Real-world example
How this comes up in practice
A small business has 20 workstations on the 192.168.1.0/24 network and one public IP from its ISP. The router uses PAT (NAT overload) so all 20 devices share one public address using different source ports. NAT questions test whether you understand the four address terms and which direction each translation applies.
What to study next
Got this wrong? Here's your next step.
Review Cisco AAA concepts — authentication, authorization, and accounting. Study privilege levels (0–15), command authorization under TACACS+, and how RADIUS differs. Then practise related 350-401 questions on access control and AAA configuration.
- →
NAT and DHCP — study guide chapter
Learn the concepts, then practise the questions
- →
NAT and DHCP practice questions
Targeted practice on this topic area only
- →
All 350-401 questions
2,015 questions across all exam domains
- →
ENCOR 350-401 study guide
Full concept coverage aligned to exam objectives
- →
350-401 practice test guide
How to use practice tests most effectively before exam day
Related practice questions
Related 350-401 practice-question pages
Use these pages to review the topic behind this question. This is how one missed question becomes focused revision.
Architecture practice questions
Practise 350-401 questions linked to Architecture.
Enterprise Network Design practice questions
Practise 350-401 questions linked to Enterprise Network Design.
SD-Access Architecture practice questions
Practise 350-401 questions linked to SD-Access Architecture.
SD-WAN Architecture practice questions
Practise 350-401 questions linked to SD-WAN Architecture.
QoS Architecture practice questions
Practise 350-401 questions linked to QoS Architecture.
Virtualization practice questions
Practise 350-401 questions linked to Virtualization.
Network Function Virtualization practice questions
Practise 350-401 questions linked to Network Function Virtualization.
Virtual Machines and Hypervisors practice questions
Practise 350-401 questions linked to Virtual Machines and Hypervisors.
VRF and Path Isolation practice questions
Practise 350-401 questions linked to VRF and Path Isolation.
Infrastructure practice questions
Practise 350-401 questions linked to Infrastructure.
OSPF practice questions
Practise 350-401 questions linked to OSPF.
BGP practice questions
Practise 350-401 questions linked to BGP.
Practice this exam
Start a free 350-401 practice session
Short sessions build daily habit. Longer sessions build exam-day stamina. Try a timed session to simulate real conditions.
FAQ
Questions learners often ask
What does this 350-401 question test?
NAT and DHCP — This question tests NAT and DHCP — Authentication checks who the user is..
What is the correct answer to this question?
The correct answer is: NAT64 translates IPv6 packets to IPv4 packets and vice versa, allowing IPv6-only clients to access IPv4 servers. — This question tests understanding of IPv6 transition mechanisms, specifically NAT64 and NPTv6, including their differences and use cases.
What should I do if I get this 350-401 question wrong?
Review Cisco AAA concepts — authentication, authorization, and accounting. Study privilege levels (0–15), command authorization under TACACS+, and how RADIUS differs. Then practise related 350-401 questions on access control and AAA configuration.
What is the key concept behind this question?
Authentication checks who the user is.
About these practice questions
Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →
Keep practising
More 350-401 practice questions
- Drag and drop the steps to configure an extended access control list (ACL) on a Cisco router in the correct order.
- Drag and drop the steps to configure a site-to-site IPsec VPN on a Cisco router in the correct order.
- Drag and drop the steps to configure VLAN Trunking Protocol (VTP) on a Cisco switch in the correct order.
- Drag and drop the steps to configure a static route on a Cisco IOS router into the correct order.
- Drag and drop the steps to configure port security on a Cisco switch in the correct order.
- Drag and drop the steps for the Spanning Tree Protocol (STP) convergence process in the correct order.
Last reviewed: Jun 18, 2026
This 350-401 practice question is part of Courseiva's free Cisco certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the 350-401 exam.
Question Discussion
Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.
Sign in to join the discussion.