Drag steps to the numbered slots on the right, or tap a step then tap a slot.
Steps
Order
1Step 1
2Step 2
3Step 3
4Step 4
5Step 5
mediumDrag & DropObjective-mapped
CCNP Practice Question: Drag and drop the steps of BGP route aggregation…
Drag and drop the steps of BGP route aggregation and suppress-map process into the correct order, from first to last.
Answer choices
Why each option matters
Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.
Correct answer & explanation
✓
Define prefix-list to match routes
First, you define the prefix-list to match specific routes. Then you create the route-map with the suppress clause. Next, you configure the aggregate-address command referencing the route-map. After that, you verify the aggregated route in the BGP table. Finally, you check that more specific routes are suppressed.
About these practice questions
One of 1,175 original 350-401 practice questions on Courseiva, each with a full explanation and wrong-answer analysis — not exam dumps or protected exam content. Learn why practice questions differ from exam dumps →
Same concept, more angles
1 more way this is tested on 350-401
These questions test the same concept from different angles. Work through them to make sure you can recognise it however the exam phrases it.
Variation 1. Drag and drop the steps of BGP route aggregation and suppress-map process into the correct order, from first to last.
medium- ✓ A.Define prefix-list for more-specific routes
- ✓ B.Create route-map with suppress clause
- ✓ C.Apply suppress-map to aggregate-address
- ✓ D.Configure aggregate-address in BGP
- ✓ E.Verify summary route and suppressed routes
Why A: The correct order for BGP route aggregation with suppress-map is: first, define a prefix-list to match the more-specific routes you want to suppress. Second, create a route-map with a suppress clause that references the prefix-list. Third, configure the aggregate-address in BGP under the address-family. Fourth, apply the suppress-map to the aggregate-address command (typically as part of the aggregate-address command itself). Finally, verify the summary route and the suppressed routes.
JA
Written by Johnson Ajibi, MSc IT Security
Senior Network & Security Engineer · founder of Courseiva
This 350-401 practice question is part of Courseiva's free Cisco certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the 350-401 exam.