200-301 · topic practice
Use this page to practise 200-301 Network Fundamentals practice questions. The goal is not to memorise dumps, but to understand the concept, review the explanation and improve your exam readiness.
What the exam tests
Network Fundamentals questions test whether you can apply the concept in context, not just recognise a definition.
How the topic appears in realistic exam-style scenarios.
Which detail in the question changes the correct answer.
How to eliminate plausible but wrong options.
How to connect the question back to the wider exam objective.
Practice set
20 questions · select your answer, then reveal the explanation
A router shows this output:
R1#show ip ospf neighbor Neighbor ID Pri State Dead Time Address Interface 10.1.1.2 1 FULL/DR 00:00:34 192.168.12.2 GigabitEthernet0/0 10.1.1.3 1 2WAY/DROTHER 00:00:39 192.168.12.3 GigabitEthernet0/0
Which statement is correct?
Which summary route best represents these four networks?
10.20.0.0/24 10.20.1.0/24 10.20.2.0/24 10.20.3.0/24
A router is configured as follows:
interface g0/1 ip address 172.16.1.1 255.255.255.0 ip helper-address 10.20.20.10
Hosts on 172.16.1.0/24 are not receiving addresses from the DHCP server at 10.20.20.10. The server is reachable by ping from the router.
What is the purpose of the ip helper-address command in this scenario?
A network engineer checks EtherChannel status on a switch and sees the following output:
Group Port-channel Protocol Ports ------+-------------+---------+----------------------------- 1 Po1(SD) LACP Gi1/0/1(s) Gi1/0/2(I)
What is the most likely reason the EtherChannel is not forwarding traffic?
Watch out for
Free account
Create a free account to save your results and see which topics improve across sessions.
Focused Network Fundamentals sessions
Every question in these sessions is drawn from the Network Fundamentals domain — nothing else.
Related practice questions
Move into related areas when this topic feels solid.
Practise IPv4 subnetting, CIDR, masks, host ranges and subnet selection.
Practise OSPF neighbours, router IDs, metrics, areas and routing-table interpretation.
Practise VLANs, access ports, trunks, allowed VLANs and switching scenarios.
Practise spanning tree, root bridge election, port roles and STP troubleshooting.
Practise LACP, PAgP, port-channel behaviour and bundle requirements.
Practise standard and extended ACLs, permit/deny logic and traffic filtering.
Practise static NAT, dynamic NAT, PAT and inside/outside address translation.
Practise DHCP scopes, relay, leases and troubleshooting.
Practise routing-table output, longest-prefix match, AD and route selection.
Practise trunk verification and VLAN forwarding across switches.
Practise WLAN security, authentication and wireless architecture concepts.
Practise IPv6 addressing, routes, neighbour discovery and common IPv6 exam traps.
A free account saves results across sessions and highlights which topics need work.
Sign up free