Question 1easymatching
Full question →Match each basic JSON element to its most accurate description.
Answer choices are not available in this preview. Open the full question page for the complete review.
easymatchingObjective-mapped
Match each basic JSON element to its most accurate description.
Common exam trap
Common exam trap: answer the scenario, not the keyword
A common exam trap is confusing JSON objects with arrays or misunderstanding the roles of keys and values. Candidates might incorrectly think that a JSON key can stand alone without a value, or that arrays contain key-value pairs like objects. This misunderstanding leads to errors in interpreting API payloads or automation scripts, which often use JSON. The exam tests your ability to recognize these basic JSON elements accurately, so mixing up these definitions can cause you to select incorrect matches or fail to understand automation data structures properly.
Technical deep dive
How to think about this question
JSON (JavaScript Object Notation) is a lightweight data-interchange format widely used in network automation and programmability, including Cisco's APIs and automation tools. At its core, JSON structures data using two fundamental elements: objects and arrays. An object is a set of key-value pairs enclosed in curly braces {}, where each key is a string that names a field, and the value can be a string, number, boolean, null, another object, or an array. An array is an ordered list of values enclosed in square brackets [], which can be any JSON data type but do not have keys associated with each element. Understanding the distinction between keys and values is crucial. A key acts as a field name or identifier, while the value is the actual data stored under that key. This pairing allows structured data representation, which is essential for automation tasks like configuring devices or parsing API responses. In Cisco network automation, JSON payloads often represent configurations or state data, so recognizing these elements helps you interpret and manipulate network information correctly. A common confusion arises when candidates mistake arrays for objects or think keys can exist without values. In practice, JSON keys always require associated values, and arrays do not contain keys but only values. This distinction affects how automation scripts parse and generate JSON data. For example, when retrieving interface details via a Cisco API, the response might include an array of interface objects, each with key-value pairs describing interface properties. Recognizing these structures ensures accurate data handling and successful automation workflows.
KKey Concepts to Remember
- A JSON object represents a collection of key-value pairs enclosed in curly braces, defining named fields and their associated data.
- A JSON array is an ordered list of values enclosed in square brackets, containing elements without keys.
- Each key in a JSON object names a specific field and must be paired with a corresponding value representing the field's content.
- Values in JSON can be strings, numbers, booleans, null, objects, or arrays, enabling nested and complex data structures.
- Automation and programmability in Cisco networks frequently use JSON to structure API payloads and configuration data.
- Misinterpreting JSON elements, such as confusing arrays with objects or keys without values, leads to errors in automation and API data handling.
- Recognizing the difference between keys and values is essential for parsing JSON responses and generating valid configuration commands.
- JSON's structured format allows network automation tools to read and write device configurations consistently and predictably.
TExam Day Tips
- Watch for words such as best, first, most likely and least administrative effort.
- Review why wrong options are wrong, not only why the correct option is correct.
Related practice questions
Related 200-301 practice-question pages
Use these pages to review the topic behind this question. This is how one missed question becomes focused revision.
CCNA subnetting practice questions
Practise IPv4 subnetting, CIDR, masks, host ranges and subnet selection.
CCNA OSPF practice questions
Practise OSPF neighbours, router IDs, metrics, areas and routing-table interpretation.
CCNA VLAN practice questions
Practise VLANs, access ports, trunks, allowed VLANs and switching scenarios.
CCNA STP practice questions
Practise spanning tree, root bridge election, port roles and STP troubleshooting.
CCNA EtherChannel practice questions
Practise LACP, PAgP, port-channel behaviour and bundle requirements.
CCNA ACL practice questions
Practise standard and extended ACLs, permit/deny logic and traffic filtering.
CCNA NAT practice questions
Practise static NAT, dynamic NAT, PAT and inside/outside address translation.
CCNA DHCP practice questions
Practise DHCP scopes, relay, leases and troubleshooting.
CCNA show ip route practice questions
Practise routing-table output, longest-prefix match, AD and route selection.
CCNA show interfaces trunk practice questions
Practise trunk verification and VLAN forwarding across switches.
CCNA wireless security practice questions
Practise WLAN security, authentication and wireless architecture concepts.
CCNA IPv6 practice questions
Practise IPv6 addressing, routes, neighbour discovery and common IPv6 exam traps.
More questions from this exam
Keep practising from the same exam bank, or move into a focused topic page if this question exposed a weak area.
Question 1
A router learns the same prefix from both OSPF and EIGRP. Which route is installed by default?
Question 2
A router shows this output: R1#show ip ospf neighbor Neighbor ID Pri State Dead Time Address Interface 10.1.1.2 1 FULL/DR 00:00:34 192.168.12.2 GigabitEthernet0/0 10.1.1.3 1 2WAY/DROTHER 00:00:39 192.168.12.3 GigabitEthernet0/0 Which statement is correct?
Question 3
What is the OSPF metric called?
Question 4
A non-root switch has two uplinks toward the root bridge. One path has a lower total STP cost than the other. What role will the lower-cost uplink have?
Question 5
A router interface applies this ACL inbound: 10 deny tcp any any eq 80 20 permit ip any any A user reports that web browsing to a server by IP address fails, but ping works. Which statement best explains the behavior?
Question 6
A router learns route 198.51.100.0/24 from OSPF with AD 110 and also has a static route to the same prefix configured with AD 150. Which route is installed?
FAQ
Questions learners often ask
What does this 200-301 question test?
A JSON object represents a collection of key-value pairs enclosed in curly braces, defining named fields and their associated data.
What exam trap should I watch out for?
Common exam trap: answer the scenario, not the keyword: A common exam trap is confusing JSON objects with arrays or misunderstanding the roles of keys and values. Candidates might incorrectly think that a JSON key can stand alone without a value, or that arrays contain key-value pairs like objects. This misunderstanding leads to errors in interpreting API payloads or automation scripts, which often use JSON. The exam tests your ability to recognize these basic JSON elements accurately, so mixing up these definitions can cause you to select incorrect matches or fail to understand automation data structures properly.
What should I do if I get this 200-301 question wrong?
Then try more questions from the same exam bank and focus on understanding why the wrong options are tempting.
Discussion
Loading comments…
Sign in to join the discussion.