- A
Use Amazon RDS Proxy with a single database
Why wrong: RDS Proxy does not address the shared database coupling.
- B
Use a separate Amazon RDS instance for each microservice
Database-per-service pattern ensures loose coupling.
- C
Use Amazon DynamoDB for all microservices
Why wrong: DynamoDB may not support complex relational queries.
- D
Use a single Amazon RDS instance shared across all microservices
Why wrong: Shared database creates tight coupling and scaling issues.
Quick Answer
The answer is to use a separate Amazon RDS instance for each microservice. This is correct because the microservices separate database per service pattern enforces loose coupling, independent scaling, and fault isolation—each service owns its data and schema, preventing a single relational database from becoming a bottleneck or single point of failure. On the AWS Certified Solutions Architect Professional SAP-C02 exam, this scenario tests your understanding of the database-per-service pattern versus shared-database anti-patterns; a common trap is choosing a single, large RDS Multi-AZ instance, which reduces operational overhead but violates service autonomy and creates tight coupling. Remember that microservices demand data sovereignty, so think “one service, one database” to avoid the shared-database trap. A useful memory tip: “Isolate to scale—separate RDS per tale.”
SAP-C02 Design for New Solutions Practice Question
This SAP-C02 practice question tests your understanding of design for new solutions. Read the scenario carefully and evaluate each option against the stated constraints before committing to an answer. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.
A company is migrating a monolithic application to a microservices architecture on AWS. The application uses a relational database with complex queries. The company wants to reduce operational overhead and achieve high availability. Which database strategy should the company adopt for the microservices?
Answer choices
Why each option matters
Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.
Correct answer & explanation
Use a separate Amazon RDS instance for each microservice
Option B is correct because a microservices architecture requires database isolation to ensure loose coupling, independent scaling, and fault isolation. Using a separate Amazon RDS instance for each microservice allows each team to manage its own schema, optimize queries independently, and avoid a single point of failure, which aligns with the goal of reducing operational overhead and achieving high availability.
Key principle: Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option.
Answer analysis
Option-by-option breakdown
For each option: why learners choose it and why it is or isn't the right answer here.
- ✗
Use Amazon RDS Proxy with a single database
Why it's wrong here
RDS Proxy does not address the shared database coupling.
- ✓
Use a separate Amazon RDS instance for each microservice
Why this is correct
Database-per-service pattern ensures loose coupling.
Related concept
Read the scenario before looking for a memorised answer.
- ✗
Use Amazon DynamoDB for all microservices
Why it's wrong here
DynamoDB may not support complex relational queries.
- ✗
Use a single Amazon RDS instance shared across all microservices
Why it's wrong here
Shared database creates tight coupling and scaling issues.
Common exam traps
Common exam trap: answer the scenario, not the keyword
The trap here is that candidates may assume a single shared database (Option D) is simpler and sufficient for high availability, overlooking the critical microservices principle of decentralized data management and the operational overhead of tight coupling.
Detailed technical explanation
How to think about this question
Under the hood, the database-per-service pattern ensures that each microservice owns its data and communicates only via APIs, preventing schema coupling and enabling independent deployment. In practice, this allows each RDS instance to be tuned for its specific workload (e.g., read replicas for read-heavy services, Multi-AZ for high availability) without affecting other services, and it aligns with the strangler fig pattern for gradual migration from a monolithic database.
KKey Concepts to Remember
- Read the scenario before looking for a memorised answer.
- Find the constraint that changes the correct option.
- Eliminate answers that are true in general but not in this case.
TExam Day Tips
- Watch for words such as best, first, most likely and least administrative effort.
- Review why wrong options are wrong, not only why the correct option is correct.
Key takeaway
Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option.
Real-world example
How this comes up in practice
An e-commerce site experiences heavy traffic on Black Friday and near-zero traffic during off-peak weeks. Rather than provisioning permanent large VMs, the team uses auto-scaling groups that add capacity automatically under load and reduce it overnight. Questions like this test whether you understand elasticity, availability zones, and cloud compute scaling patterns.
What to study next
Got this wrong? Here's your next step.
Identify which exam domain this question belongs to, review the core concept, then practise similar questions from the same domain.
- →
Design for New Solutions — study guide chapter
Learn the concepts, then practise the questions
- →
Design for New Solutions practice questions
Targeted practice on this topic area only
- →
All SAP-C02 questions
1,746 questions across all exam domains
- →
AWS Certified Solutions Architect Professional SAP-C02 study guide
Full concept coverage aligned to exam objectives
- →
SAP-C02 practice test guide
How to use practice tests most effectively before exam day
Related practice questions
Related SAP-C02 practice-question pages
Use these pages to review the topic behind this question. This is how one missed question becomes focused revision.
Design Solutions for Organizational Complexity practice questions
Practise SAP-C02 questions linked to Design Solutions for Organizational Complexity.
Design for New Solutions practice questions
Practise SAP-C02 questions linked to Design for New Solutions.
Continuous Improvement for Existing Solutions practice questions
Practise SAP-C02 questions linked to Continuous Improvement for Existing Solutions.
Accelerate Workload Migration and Modernization practice questions
Practise SAP-C02 questions linked to Accelerate Workload Migration and Modernization.
SAA-C03 VPC practice questions
Practise SAP-C02 questions linked to SAA-C03 VPC.
SAA-C03 S3 lifecycle policy questions
Practise SAP-C02 questions linked to SAA-C03 S3 lifecycle policy questions.
SAA-C03 RDS Multi-AZ questions
Practise SAP-C02 questions linked to SAA-C03 RDS Multi-AZ questions.
SAA-C03 IAM policy practice questions
Practise SAP-C02 questions linked to SAA-C03 IAM policy.
SAA-C03 Route 53 failover questions
Practise SAP-C02 questions linked to SAA-C03 Route 53 failover questions.
SAA-C03 CloudFront practice questions
Practise SAP-C02 questions linked to SAA-C03 CloudFront.
SAA-C03 NAT gateway questions
Practise SAP-C02 questions linked to SAA-C03 NAT gateway questions.
SAA-C03 VPC endpoint questions
Practise SAP-C02 questions linked to SAA-C03 VPC endpoint questions.
Practice this exam
Start a free SAP-C02 practice session
Short sessions build daily habit. Longer sessions build exam-day stamina. Try a timed session to simulate real conditions.
FAQ
Questions learners often ask
What does this SAP-C02 question test?
Design for New Solutions — This question tests Design for New Solutions — Read the scenario before looking for a memorised answer..
What is the correct answer to this question?
The correct answer is: Use a separate Amazon RDS instance for each microservice — Option B is correct because a microservices architecture requires database isolation to ensure loose coupling, independent scaling, and fault isolation. Using a separate Amazon RDS instance for each microservice allows each team to manage its own schema, optimize queries independently, and avoid a single point of failure, which aligns with the goal of reducing operational overhead and achieving high availability.
What should I do if I get this SAP-C02 question wrong?
Identify which exam domain this question belongs to, review the core concept, then practise similar questions from the same domain.
What is the key concept behind this question?
Read the scenario before looking for a memorised answer.
About these practice questions
Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →
Same concept, more angles
1 more ways this is tested on SAP-C02
These questions test the same concept from different angles. Work through them to make sure you can recognise it however the exam phrases it.
Variation 1. A company is migrating a monolithic application to a microservices architecture on AWS. The application uses a relational database with complex queries. The team wants to decouple the database layer and allow each microservice to own its data. Which design pattern should the team implement?
hard- A.Implement an event-driven architecture using Amazon SQS and AWS Lambda with CQRS.
- B.Deploy a read replica of the database for each microservice to offload queries.
- C.Use a single Amazon RDS instance with multiple schemas for each microservice.
- ✓ D.Use a database-per-service pattern with each microservice having its own Amazon DynamoDB table or RDS instance.
Why D: Option D is correct because the database-per-service pattern ensures each microservice has its own database, promoting loose coupling and independent scaling. Option A is wrong because a shared database contradicts the goal of decoupling. Option B is wrong because an event-driven architecture with CQRS is a separate pattern for query optimization. Option C is wrong because a read replica does not decouple the database per service.
Keep practising
More SAP-C02 practice questions
- Match each AWS compute service to its use case.
- A company is designing a new microservices architecture on AWS. They need a solution for service discovery that allows s…
- A company has a centralized logging account and multiple application accounts. All VPC Flow Logs are sent to a central S…
- A company is implementing AWS Control Tower to manage a multi-account environment. The security team needs to ensure tha…
- A company is designing a cross-account network architecture. The security team requires that all traffic between VPCs in…
- A company is using AWS Organizations with multiple accounts. The central IT team wants to deploy a set of common VPCs in…
Last reviewed: Jun 11, 2026
This SAP-C02 practice question is part of Courseiva's free Amazon Web Services certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the SAP-C02 exam.
Question Discussion
Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.
Sign in to join the discussion.