Courseiva
220-1101Exam Domain

Networking (20%)220-1101 Study Guide

22 chapters
~550 min total
Free — no signup required

Quick Answer

Candidates must map TCP/UDP ports, configure IPv4/IPv6 addressing and subnetting, and run ipconfig, ping, tracert, and nslookup to diagnose connectivity. Get the port-to-protocol pairs right, especially 22 SSH, 443 HTTPS, and 3389 RDP.

Networking is 20% of CompTIA A+ Core 1 220-1101, covering TCP/IP ports and protocols, IP addressing and subnetting, wireless and wired standards, network services, and troubleshooting tools. The exam tests this through scenario questions asking you to identify a port, choose a cable or wireless standard, configure a client, or diagnose connectivity with the right command.

What the exam tests

  • Matching TCP and UDP ports to services such as SSH 22, DNS 53, HTTPS 443, RDP 3389
  • Distinguishing 802.11 wireless standards, frequencies, and 2.4 GHz versus 5 GHz channel behavior
  • Configuring IPv4 addressing, subnet masks, default gateways, DNS servers, and DHCP versus static assignment
  • Using ipconfig, ping, tracert, nslookup, netstat, and net use to diagnose connectivity faults

Common exam traps

  • Confusing TCP and UDP ports for the same service, such as DNS using both 53 TCP and 53 UDP depending on the query type.
  • Mixing up 2.4 GHz and 5 GHz tradeoffs, assuming higher frequency always gives longer range instead of faster speeds with shorter reach.
  • Forgetting APIPA 169.254.x.x means DHCP failed, then blaming DNS or the default gateway for the connectivity problem.

Networking (20%) Chapters

Other 220-1101 Domains

Test your Networking (20%) knowledge

Free 220-1101 practice questions with full explanations. Test what you learn chapter by chapter.

220-1101 Practice Questions