VCP-VVF Deploy Configure And Operate Vvf Practice Test 5 — 15 Questions

Question 1

Which TWO actions are necessary to ensure proper lifecycle management of ESXi hosts via vSphere Lifecycle Manager?

Accepted Answer

Create a cluster image. Option B is correct because vSphere Lifecycle Manager (vLCM) manages ESXi hosts through a desired-state cluster image, which defines the exact ESXi base image, firmware add-ons, and vendor add-ons that all hosts in the cluster must match. Option D is correct because after a cluster image is created and assigned, vLCM must scan hosts to check compliance against that image, which is the mechanism that detects drift and enables remediation. Option A is not required for host lifecycle management, since updating the vCenter Server appliance is a separate management-plane operation and not a prerequisite for imaging ESXi hosts. Option C is unrelated, as VMware Tools is installed in guest VMs for drivers and guest-agent functionality, not for ESXi host lifecycle management. Option E is incorrect because DRS is a resource-scheduling feature and disabling it has no bearing on vLCM image compliance or remediation.

Answer

Update the vCenter Server appliance

Answer

Install VMware Tools

Answer

Disable DRS

Question 2

Which THREE steps are required when configuring identity federation for vSphere with an OIDC provider?

Accepted Answer

Input the Discovery Endpoint URL. Option C is correct because vSphere's OIDC configuration requires the Discovery Endpoint URL (the .well-known/openid-configuration endpoint) so vCenter can automatically retrieve the provider's authorization, token, and JWKS endpoints. Option D is correct because the OIDC client credentials include a Client Secret, which vCenter must be given to authenticate itself to the identity provider during the authorization code flow. Option E is correct because the identity provider must have vCenter registered as an OIDC client, generating the Client ID and redirect URI that vCenter uses to complete the federation trust. Option A is not a required configuration step in this workflow, and Option B is incorrect because assigning a global administrator role is an authorization/role-mapping task, not part of establishing the OIDC federation itself.

Answer

Enable SSL verification

Answer

Assign a global administrator role

Question 3

You are deploying a new Supervisor Cluster in VVF. Which component is required to facilitate communication between the vSphere infrastructure and the Tanzu Kubernetes Grid services?

Accepted Answer

vSphere Distributed Switch. A vSphere Distributed Switch (vDS) is required to facilitate communication between the vSphere infrastructure and Tanzu Kubernetes Grid services in a Supervisor Cluster deployment. The vDS provides the necessary networking constructs (port groups, uplinks) that the Supervisor Cluster uses for its management, workload, and service networks, including the NSX-T or vDS-based networking for Tanzu components.

Answer

Standard vSwitch

Answer

NSX Edge Node

Answer

vSAN File Service

Question 4

When applying a VVF license, where must it be assigned to ensure full compliance across the environment?

Accepted Answer

vCenter Server level. The vSphere Foundation license must be applied at the vCenter Server level to propagate to the managed hosts.

Answer

VM level

Answer

Datacenter folder

Answer

Host level only

Question 5

Which THREE components are required for successful Supervisor deployment in a VVF environment?

Accepted Answer

vSAN datastore. The Supervisor requires distributed switches, specific licensing, and storage policies.

Answer

NSX Manager

Answer

Aria Automation

Question 6

You are configuring a Supervisor cluster on a vSphere cluster with vSAN. Which requirement must be met before enabling the Supervisor service?

Accepted Answer

The cluster must be using vSphere Distributed Switch (vDS) version 8.0 or later. A vSphere cluster must be configured with a vSAN datastore to support Supervisor cluster persistent volumes.

Answer

NTP must be disabled on all hosts

Answer

The cluster must have exactly three nodes

Answer

All ESXi hosts must be in Maintenance Mode

Question 7

An administrator needs to apply a VVF license key to a cluster managed by vCenter Server. Where is the correct location to assign this license in the vSphere Client?

Accepted Answer

Administration > Licensing > Assets. Licensing in VVF is managed at the vCenter Server level via the Licensing global inventory object.

Answer

Datacenter > Settings > Licensing

Answer

Host and Clusters view > Cluster > Licensing tab

Answer

vCenter Server Settings > Licensing

Question 8

An administrator is preparing to deploy the Supervisor on a vSphere cluster. Which THREE of the following are prerequisites for the management network?

Accepted Answer

An IP address pool for the Supervisor control plane VMs. Management network prerequisites include specific subnet sizing, MTU settings, and address pools for the control plane.

Answer

A dedicated VLAN for the workload network

Answer

A /24 subnet for the management network

Question 9

When configuring identity for VVF, which identity source type is recommended for seamless integration with enterprise-grade directory services?

Accepted Answer

Identity Federation (OIDC/SAML). LDAP over SSL or Identity Federation (OIDC/SAML) are standard for modern VVF deployments.

Answer

OpenLDAP

Answer

Workgroup

Answer

Local OS users

Question 10

You are deploying a VVF Supervisor cluster. During the initial configuration of the Workload Management service, which prerequisite must be satisfied to allow the control plane VMs to communicate with the management network?

Accepted Answer

Define a dedicated IP address range for the control plane VMs in the workload network. The Supervisor cluster requires a dedicated IP range for the control plane VMs that is routable to the vCenter Server and NSX Manager instances.

Answer

Configure an ephemeral port group for the management network

Answer

Disable DRS on the cluster before initiating the Supervisor deployment

Answer

Enable vSAN integration on the management VMkernel interface

Question 11

When configuring a VVF license, which location in the vSphere Client is used to apply the license key to the cluster?

Accepted Answer

Administration > Licensing > Assets. Licensing is managed under the Administration section of the vSphere Client.

Answer

Datacenter > Settings > Subscription

Answer

Global Inventory Lists > Licensing

Answer

Host and Cluster view > Configure > Licensing

Question 12

Which TWO features are included in VVF to assist in operational monitoring and alerting?

Accepted Answer

Integration with VMware Aria Operations. Option A is correct because VMware Validated Design for VMware Cloud Foundation (VVF) includes integration with VMware Aria Operations, which provides operational monitoring, dashboards, and alerting across the SDDC stack. Option B is correct because VVF leverages built-in vSphere Alarms, which are native vCenter Server alerting mechanisms for monitoring host, VM, and cluster events and conditions. These two features together deliver the operational monitoring and alerting capabilities required in a VVF environment. Option C is not included because hardware vendor support contract management is a procurement/administrative function, not a monitoring or alerting feature. Option D is not included because automated guest OS patching is handled by tools such as vSphere Lifecycle Manager or third-party patch management, not as a VVF monitoring feature. Option E is not included because direct hardware component management via BIOS is a firmware/hardware administration task, not an operational monitoring or alerting capability.

Answer

Hardware vendor support contract management

Answer

Automated VM guest OS patching

Answer

Direct hardware component management via BIOS

Question 13

Which THREE steps are required to properly prepare a vSphere cluster for Supervisor deployment?

Accepted Answer

Ensure vSphere HA is enabled. Option A is correct because vSphere HA must be enabled on the cluster so the Supervisor's control plane VMs (the three supervisor nodes) can be restarted on surviving hosts if a host fails, which is a documented prerequisite for Supervisor deployment. Option C is correct because enabling vSAN storage policy support on the cluster is required so that the Supervisor can consume a vSAN datastore through storage policies for its control plane and workload namespaces. Option E is correct because the cluster must be backed by a vSphere Distributed Switch (VDS) with the required port groups, since Supervisor networking (Management, Workload, and Frontend/NSX or vSphere networking) is configured on a VDS rather than a standard vSwitch. Option B is not required — DRS should remain enabled (typically fully automated) to provide the resource balancing and initial placement the Supervisor relies on, so disabling it would be counterproductive. Option D is not required — Content Library synchronization is unrelated to Supervisor prerequisites and disabling it would prevent needed VM images/templates from being available.

Answer

Disable DRS to prevent conflicts

Answer

Disable Content Library synchronization

Question 14

Which TWO methods can be used to monitor vCenter Server performance metrics?

Accepted Answer

VMware Aria Operations. Both the Performance tab in the client and Aria Operations are standard monitoring tools.

Answer

Running 'esxtop' on vCenter Server

Answer

Enabling 'Performance' mode in vCenter settings

Answer

Direct SNMP configuration on individual VMs

Question 15

Which THREE components are part of the VVF licensing scope?

Accepted Answer

vSphere Enterprise Plus. The VVF (VMware Validated Foundation / vSphere Foundation) licensing scope includes vSphere Enterprise Plus (B), which provides the core compute virtualization layer with full Enterprise Plus features such as DRS, vMotion, and Distributed Switches. It also includes VMware Aria Operations (C), the operations management and monitoring component bundled into the VVF stack for performance, capacity, and cost analytics. vSAN Enterprise (D) is likewise part of the VVF licensing scope, delivering the software-defined storage tier with Enterprise-level data services. By contrast, VMware Cloud Foundation (A) is a separate, broader full-stack orchestration product that supersedes VVF rather than being a component within it, and NSX Advanced Load Balancer (E) is a standalone load-balancing/ADC offering not included in the VVF license scope.

Answer

VMware Cloud Foundation (full stack orchestration)

Answer

NSX Advanced Load Balancer