A Splunk administrator is configuring an index to retain data for exactly 90 days. The indexer cluster has a replication factor of 3 and a search factor of 2. Which TWO settings in indexes.conf control the retention period for this index? (Choose two.)
A Splunk administrator is troubleshooting an indexer that is not receiving data for a specific index. The index is configured with a volume that has maxVolumeDataSizeMB set to 500000. The volume's current size is 499000 MB. The administrator notices that new data is being rejected. What is the most likely cause?
An administrator is troubleshooting why data from a specific index is not being replicated across an indexer cluster. The index is configured with a replication factor of 2 and a search factor of 2. What should be checked first?
An administrator is troubleshooting why a new index named 'security' is not receiving data on a heavy forwarder. The forwarder is configured with outputs.conf to send data to an indexer. The administrator checks the forwarder's splunkd.log and sees messages about 'AggregatorMiningProcessor' and 'Sending data to indexer'. Which two actions should the administrator take to verify that the index is correctly configured on the indexer? (Choose two.)
An administrator is configuring a new index named `web_logs` on a Splunk Enterprise indexer. The requirement is to maintain the index so that the most recent data is always the fastest to search, while older data is automatically moved to a slower, cheaper storage tier after 30 days. Which configuration in `indexes.conf` should be used to achieve this?
A Splunk administrator is troubleshooting an indexer that is not freezing buckets as expected. The index 'app_logs' is configured with frozenTimePeriodInSecs = 86400 and maxTotalDataSizeMB = 100000. The indexer has been running for 48 hours, and the index size is 120GB. However, no buckets have been frozen. Which factor is most likely preventing the freezing of buckets?
An administrator is troubleshooting an indexer that is not moving buckets to the cold path as expected. The index `app_logs` has `homePath` and `coldPath` configured, and `coldPath.maxDataSizeMB` is set to 100000. The `homePath` is currently using 200 GB, and the `coldPath` is using 50 GB. What is the most likely reason that buckets are not rolling to cold?
An administrator is troubleshooting an indexer that is running low on disk space. Investigation shows that the 'security' index is using far more space than expected. The administrator runs a search to identify bucket sizes and discovers that many cold buckets are stored on the same volume as hot and warm buckets. The administrator wants to move only the cold buckets to a separate, larger volume without disrupting searches. Which action should the administrator take?
An administrator is configuring an index named `compliance_logs` to archive cold buckets to a remote file system before they are frozen. The administrator wants to ensure that the archived buckets are not deleted from the indexer until the archive is verified. Which TWO settings in `indexes.conf` must be configured to achieve this? (Choose two.)
An administrator needs to ensure that a specific index named 'audit' retains data for exactly 30 days and then moves the data to a remote archive location. The administrator has configured frozenTimePeriodInSecs = 2592000 and coldToFrozenDir = /mnt/archive. After 30 days, the administrator notices that the data is still on the indexer's primary storage and not in the archive. What is the most likely reason?
A Splunk administrator is configuring an indexer to use a remote file system for cold bucket archiving. The index `archive_logs` has `coldToFrozenDir` set to a mounted NFS path, and `frozenTimePeriodInSecs` is set to 30 days. The administrator notices that buckets older than 30 days are not being archived to the NFS path; instead, they are being deleted. What is the most likely cause?
A Splunk administrator is configuring a new index on an indexer cluster. The administrator wants to ensure that the index uses a custom storage volume for cold buckets and that the volume is limited to 500 GB. Which two configurations are required in indexes.conf? (Choose two.)
A Splunk administrator is troubleshooting an indexer that is not indexing new data. The administrator runs `splunk list index` and notices that the index `security_logs` has a size of 0 MB, even though data is being sent to it. The index is configured with `maxTotalDataSizeMB = 1000` and `frozenTimePeriodInSecs = 86400`. What is the most likely cause?
A user reports that their search is failing to return data from 3 years ago, even though the retention policy is set to 5 years. What is the most likely cause?
An administrator needs to create a new index called 'finance' on a Splunk Enterprise indexer cluster. The index must store data in a dedicated volume with a custom path. Which configuration file and stanza should be edited to define the volume?
An administrator manages a Splunk Enterprise deployment where a critical index named 'audit_logs' must retain searchable data for 90 days. Compliance requires that after 90 days, the data must be moved to a remote NFS share for archival, but it must not be searchable in Splunk. The administrator has set frozenTimePeriodInSecs = 7776000 in indexes.conf for this index. Which additional configuration is required to ensure that buckets are archived to the remote NFS share instead of being deleted?
An administrator is configuring a new index called 'finance' on a Splunk Enterprise indexer. The index must store raw events for 90 days and then delete them permanently. The administrator sets frozenTimePeriodInSecs = 7776000 in indexes.conf under the [finance] stanza. After 90 days, the administrator notices that the data is still searchable. What is the most likely cause?
An administrator is configuring a new index named 'finance' in indexes.conf on a standalone Splunk Enterprise indexer. Company policy requires that no single index may store more than 100 GB of raw data on disk, and the oldest data must be removed automatically once that limit is reached. Which setting should the administrator configure to enforce this hard cap?
An administrator is configuring an index that receives data from a syslog receiver. The index must retain data for 90 days, but the storage team requires that the index not consume more than 500 GB of disk space. When the 500 GB limit is reached, the oldest data must be deleted. Which indexes.conf setting should be used to enforce the disk space limit?
An administrator has a Splunk Enterprise indexer with a single index named 'web_logs'. The index is configured with maxTotalDataSizeMB = 500000 and frozenTimePeriodInSecs = 7776000. The indexer's disk volume is 1TB and currently 80% full. The administrator wants to ensure that the oldest data is frozen when the disk reaches 90% capacity, even if the time or size limits have not been reached. Which configuration change should be made?
An administrator is planning to implement indexer clustering and needs to ensure that data is properly replicated and searchable. The cluster will have three indexers. Which TWO factors must be configured to ensure that a copy of each bucket is available for search even if one indexer fails? (Choose two.)
A Splunk administrator is building a new index called 'web_preview' on a single indexer to ingest temporary test data. The data should be searchable immediately but must be deleted automatically after 7 days without any manual intervention. Which indexes.conf setting should the administrator configure to meet the 7-day retention requirement?
A Splunk administrator needs to add a new index called 'security_events' that will store data on a dedicated storage volume. The volume is already defined in indexes.conf as 'volume_security'. Which stanza and setting must be added to indexes.conf to create the index and assign it to the volume?
An administrator needs to configure a new index that will store data for 30 days and then delete it. The data is not required for compliance or archiving. Which setting in indexes.conf should be used to automatically delete data after 30 days?
An administrator manages a Splunk Enterprise indexer cluster with three peer nodes and a replication factor of 2. A new index named 'audit_secure' is created with search factor 1 and replication factor 2. After a peer node fails and is offline for several hours, searches against 'audit_secure' return incomplete results. Which action should the administrator take to restore full searchability of the index?
A Splunk administrator needs to reduce the storage footprint of an index named 'app_logs' on a standalone indexer. The index currently retains data indefinitely because no retention settings are configured. The administrator wants to (1) delete data older than 90 days and (2) cap the index at 500 GB, whichever limit is reached first. Which TWO settings should the administrator configure in indexes.conf to meet these requirements? (Choose two.)
An administrator is troubleshooting an indexer cluster where searches are returning incomplete results. The cluster has three indexers with replication factor 2 and search factor 2. The administrator notices that one indexer is down. What is the most likely reason for incomplete search results?
A Splunk administrator needs to ensure that events from a high-volume web server index are stored in a way that allows for efficient searching and compliance with a 90-day retention policy. The index currently uses the default settings. The administrator wants to configure the index so that buckets are rolled more frequently to improve search performance and reduce the impact of a single large bucket. Which setting in indexes.conf should be adjusted to control the maximum size of a hot bucket before it rolls to warm?
A Splunk administrator is managing an indexer cluster with a replication factor of 3 and a search factor of 2. A peer node fails and is expected to be offline for an extended period. The administrator needs to ensure that the cluster remains searchable and that data is not lost. Which action should be taken to maintain the search factor while the peer is down?
A Splunk administrator is configuring a new index for a department that requires data to be retained for exactly 2 years. After 2 years, the data must be archived to a remote storage system and then deleted from the indexers. The administrator wants to automate this process. Which configuration in indexes.conf should be set to ensure that buckets older than 2 years are moved to frozen and then archived?
A Splunk administrator needs to add a new index named `audit_logs` that will store data on a specific storage volume defined as `volume:audit_vol`. The volume has a maximum size of 500 GB. Which configuration in `indexes.conf` is required to associate the index with this volume?
An administrator is setting up a new Splunk index for a critical application. The index will receive a high volume of data, and the administrator wants to ensure that the indexer's disk usage is optimized. The administrator decides to use a storage volume to manage multiple indexes and wants to set a maximum size for the volume. Which configuration file and stanza should be used to define the volume and its size limit?
A Splunk administrator is troubleshooting an indexer that is not receiving data from a universal forwarder. The administrator suspects that the issue is related to the index configuration. Which TWO actions should the administrator take to verify that the index is properly configured to receive data? (Choose two.)
A Splunk administrator needs to configure a new index called `metrics_store` on a heavy forwarder. The requirement is that the index data must be stored on a dedicated storage volume named `volume:metrics` and the volume should be limited to 200 GB. Which configuration correctly sets the volume for this index?