SALESFORCE-PD1 Testing Debugging And Deployment — All Questions With Answers

Question 1hardmultiple choice

Read the full Testing Debugging And Deployment explanation →

A developer wants to view real-time debug log streaming in their local environment using the Salesforce CLI. Which command should the developer execute?

Question 2easymultiple choice

Read the full Testing Debugging And Deployment explanation →

A developer has written a test method that requires a large volume of test data to be set up. To avoid writing duplicate data setup code across multiple test methods in the same class, which annotation should the developer use?

Question 3easymultiple choice

Read the full Testing Debugging And Deployment explanation →

A developer needs to write a unit test to verify that a trigger correctly inserts related Task records when a custom object record is created. Which annotation should the developer place on the test class method to ensure it runs correctly and can access existing org data if needed?

Question 4easymultiple choice

Read the full Testing Debugging And Deployment explanation →

A developer is preparing to deploy metadata changes from a sandbox to a production org using Outbound Change Sets. Where must the administrator or developer establish the connection between the two organizations?

Question 5mediummultiple choice

Read the full Testing Debugging And Deployment explanation →

A developer runs unit tests in the Developer Console and notices that one test method fails when run as part of the entire test class, but passes successfully when run in isolation. What is the most likely cause of this issue?

Question 6hardmultiple choice

Read the full Testing Debugging And Deployment explanation →

A developer is writing a unit test and needs to assert that a specific custom exception was thrown during invalid input processing. Which pattern should the developer use?

Question 7mediummulti select

Read the full Testing Debugging And Deployment explanation →

Which THREE statements are true regarding Salesforce debug logs? (Choose three.)

Question 8hardmulti select

Read the full Testing Debugging And Deployment explanation →

Which THREE features are supported in Salesforce scratch orgs? (Choose three.)

Question 9mediummulti select

Read the full Testing Debugging And Deployment explanation →

Which TWO circumstances will cause an Apex unit test method to fail? (Choose two.)

Question 10mediummultiple choice

Read the full Testing Debugging And Deployment explanation →

A developer wants to ensure that test methods in a managed package upgrade test all triggers and classes, and needs to bypass existing organization test data to use only packaged data. Which annotation parameter should be used?

Question 11mediummultiple choice

Read the full Testing Debugging And Deployment explanation →

A developer is deploying metadata from a sandbox to a production org using Salesforce CLI. Which command should the developer use to validate the deployment without actually saving components to the target organization?

Question 12mediummulti select

Read the full Testing Debugging And Deployment explanation →

A developer needs to write a unit test that verifies user permissions and accessibility before executing business logic. Which TWO methods or classes are valid for simulating different user contexts in Apex tests? (Choose two.)

Question 13easymultiple choice

Read the full Testing Debugging And Deployment explanation →

Which annotation allows a private method in an Apex class to be visible to unit test classes for assertion purposes?

Question 14mediummulti select

Read the full Testing Debugging And Deployment explanation →

When deploying code using Unmanaged Change Sets between connected Salesforce organizations, which TWO limitations or behaviors apply? (Choose two.)

Question 15easymultiple choice

Read the full Testing Debugging And Deployment explanation →

Which annotation is required for a method to be recognized by the Apex test runner?

Question 16hardmultiple choice

Read the full Testing Debugging And Deployment explanation →

When deploying via Metadata API, what happens if a test class fails during the deployment?

Question 17mediummulti select

Read the full Testing Debugging And Deployment explanation →

Which TWO of the following are valid ways to specify which tests to run in the Salesforce CLI?

Question 18hardmultiple choice

Read the full Testing Debugging And Deployment explanation →

Why must you use Test.startTest() when testing asynchronous Apex code?

Question 19easymultiple choice

Read the full Testing Debugging And Deployment explanation →

Which utility class is used to assert that code behaves as expected in Apex tests?

Question 20mediummultiple choice

Read the full Testing Debugging And Deployment explanation →

A developer needs to measure the performance of a SOQL query. Which log category and level should be used?

Question 21mediummultiple choice

Read the full Testing Debugging And Deployment explanation →

A developer needs to test a feature that relies on the current time. Which method should be used to simulate time?

Question 22hardmultiple choice

Read the full Testing Debugging And Deployment explanation →

Why might a deployment fail due to 'Apex classes do not have sufficient coverage'?

Question 23hardmultiple choice

Read the full Testing Debugging And Deployment explanation →

What is the primary constraint on using @testSetup?

Question 24hardmultiple choice

Read the full Testing Debugging And Deployment explanation →

When testing a class that depends on Custom Settings, what is the best practice?

Question 25mediummultiple choice

Read the full Testing Debugging And Deployment explanation →

How can you run tests for a specific namespace using the CLI?

Question 26mediummultiple choice

Read the full Testing Debugging And Deployment explanation →

What is the maximum number of debug logs that can be stored per user?

Question 27hardmultiple choice

Read the full Testing Debugging And Deployment explanation →

A developer needs to reset the governor limits within a test method to verify functionality that processes large amounts of records. Which method should be used?

Question 28easymultiple choice

Read the full Testing Debugging And Deployment explanation →

Where can a developer view the generated debug logs for an Apex execution in the Salesforce UI?

Question 29mediummultiple choice

Read the full Testing Debugging And Deployment explanation →

A developer is writing a test class that requires several custom objects to be populated with data. What is the most efficient way to handle this across multiple test methods?

Question 30easymultiple choice

Read the full Testing Debugging And Deployment explanation →

Which of the following is a limitation of Change Sets?

Question 31easymultiple choice

Read the full Testing Debugging And Deployment explanation →

Which tool is best suited for running all tests in an org and viewing the code coverage percentages?

Question 32easymulti select

Read the full Testing Debugging And Deployment explanation →

Which TWO of the following are valid ways to execute Apex unit tests in Salesforce?

Question 33hardmulti select

Read the full Testing Debugging And Deployment explanation →

Which TWO of the following are limitations when deploying using the Metadata API?

Question 34hardmulti select

Read the full Testing Debugging And Deployment explanation →

Which TWO of the following are required to successfully use the 'Test.startTest()' and 'Test.stopTest()' pattern for testing batch Apex?

Question 35hardmulti select

Read the full Testing Debugging And Deployment explanation →

Which TWO of the following are true about the 'Debug Log' settings in the Setup menu?

Question 36hardmultiple choice

Read the full Testing Debugging And Deployment explanation →

A developer deploys a new Apex class to production using the Salesforce CLI and a manifest file. The deployment succeeds, but a scheduled Apex job that calls this class now fails at runtime with a 'System.TypeException: Invalid conversion' error that never appeared in the sandbox. The sandbox and production have identical Apex code and API versions, but production has several record types and picklist values that are not present in the sandbox. Which action should the developer take to most reliably reproduce and diagnose the failure before redeploying?

Question 37mediummultiple choice

Read the full Testing Debugging And Deployment explanation →

A developer wrote an Apex test class that inserts 200 Account records and then queries them to verify a trigger populated a custom field. The test fails with a System.LimitException: Too many SOQL queries: 101 error. The test class uses @isTest(SeeAllData=false) and contains a single test method. Which change should the developer make to resolve the error while preserving the test's intent?

Question 38hardmulti select

Read the full Testing Debugging And Deployment explanation →

A developer is preparing to deploy a set of Apex classes, Visualforce pages, and custom objects from a sandbox to production using the Metadata API. The deployment must succeed on the first attempt. Which two actions should the developer take before deploying? (Choose two.)

Question 39easymultiple choice

Read the full Testing Debugging And Deployment explanation →

A developer needs to debug an Apex trigger that is not firing as expected when a new Case is created from the Salesforce UI. The developer wants to see detailed information about the trigger's execution, including variable assignments and SOQL queries. Which tool should the developer use to capture this information in real time?

Question 40mediummultiple choice

Read the full Testing Debugging And Deployment explanation →

A developer is writing a unit test for an Apex class that calculates discounts based on Account revenue. The test needs to verify that a custom exception, DiscountException, is thrown when the revenue is negative. Which approach should the developer use to assert that the exception is thrown?

Question 41mediummultiple choice

Read the full Testing Debugging And Deployment explanation →

A developer wants to test an asynchronous future method. Where must the developer place the asynchronous code execution so that it runs synchronously and within the test context?

Question 42mediummultiple choice

Read the full Testing Debugging And Deployment explanation →

A developer is analyzing a debug log and notices that it is truncated because it exceeded the maximum file size limit. Which action should the developer take to capture only the relevant Apex code execution details without exceeding the limit?

Question 43hardmultiple choice

Read the full Testing Debugging And Deployment explanation →

A developer receives a System.LimitException: Too many SOQL queries: 101 when running a complex unit test. The test class inserts a large volume of test records that inadvertently cause a trigger to execute multiple queries inside a loop. What is the most effective way to reset the governor limits specifically for the code being tested?

Question 44hardmultiple choice

Read the full Testing Debugging And Deployment explanation →

A developer is writing a unit test that executes under a specific user context to verify sharing rules. Which method should the developer use to specify the user for the subsequent test operations?

Question 45mediummultiple choice

Read the full Testing Debugging And Deployment explanation →

A developer is writing a test method that performs a callout to an external REST service. Which interface must the developer implement to provide mock responses during the unit test execution?

Question 46mediummultiple choice

Read the full Testing Debugging And Deployment explanation →

A developer is using Salesforce CLI to create a temporary environment for feature development and testing that includes all source code and shape settings. Which CLI command should the developer use to create this temporary environment?

Question 47mediummultiple choice

Read the full Testing Debugging And Deployment explanation →

A developer is deploying a profile and custom fields using an Unmanaged Change Set. Upon deployment, some custom field permissions fail to apply correctly in production. What is the most likely cause of this behavior?

Question 48hardmultiple choice

Read the full Testing Debugging And Deployment explanation →

A developer has written a Lightning Web Component and Apex controller, and wants to deploy only these specific metadata components to a production org using Salesforce CLI without relying on change sets. Which command is appropriate?

Question 49easymultiple choice

Read the full Testing Debugging And Deployment explanation →

A developer needs to verify code coverage across an entire Apex organization before deploying code to production. What is the minimum overall Apex code coverage required by Salesforce for production deployment?

Question 50easymultiple choice

Read the full Testing Debugging And Deployment explanation →

A developer wants to inspect the code coverage of individual classes directly within the Salesforce Developer Console. Under which tab can the developer view this breakdown?

Question 51easymulti select

Read the full Testing Debugging And Deployment explanation →

Which TWO actions occur automatically when Test.stopTest() is called in an Apex unit test? (Choose two.)

Question 52easymulti select

Read the full Testing Debugging And Deployment explanation →

Which TWO practices are considered best practices when writing Apex unit tests in Salesforce? (Choose two.)

Question 53hardmulti select

Read the full Testing Debugging And Deployment explanation →

Which THREE items are best practices when setting up test data using @TestSetup methods? (Choose three.)

Question 54mediummulti select

Read the full Testing Debugging And Deployment explanation →

Which TWO conditions must be met for an Apex test method to successfully execute and contribute to code coverage? (Choose two.)

Question 55hardmulti select

Read the full Testing Debugging And Deployment explanation →

Which TWO tools or APIs can a developer use to deploy metadata between Salesforce organizations? (Choose two.)

Question 56easymultiple choice

Read the full Testing Debugging And Deployment explanation →

A developer is writing an Apex test class and needs to reset governor limits before executing a block of asynchronous code testing. Which method should the developer use?

Question 57easymultiple choice

Read the full Testing Debugging And Deployment explanation →

Where should a developer look in the Salesforce user interface to inspect detailed system debug logs generated during a specific transaction?

Question 58hardmultiple choice

Read the full Testing Debugging And Deployment explanation →

An Apex trigger performs a callout to an external web service and a developer is writing a unit test for this trigger. How should the developer handle the callout during the test execution?

Question 59hardmultiple choice

Read the full Testing Debugging And Deployment explanation →

An asynchronous @future method is called from within an Apex test method. When are the statements inside the @future method actually executed during the test run?

Question 60hardmultiple choice

Read the full Testing Debugging And Deployment explanation →

When calling Test.startTest() and Test.stopTest(), what happens to the governor limits?

Question 61mediummultiple choice

Read the full Testing Debugging And Deployment explanation →

What is the primary purpose of the Salesforce CLI in a CI/CD pipeline?

Question 62hardmulti select

Read the full Testing Debugging And Deployment explanation →

A developer is troubleshooting a complex set of triggers and wants to restrict the amount of debug log data captured for a specific integration user. Which THREE actions can the developer take to manage debug logs effectively? (Choose three.)

Question 63mediummultiple choice

Read the full Testing Debugging And Deployment explanation →

A developer needs to verify that a trigger correctly handles bulk data, specifically 250 records. What is the most effective approach?

Question 64mediummultiple choice

Read the full Testing Debugging And Deployment explanation →

A developer wants to ensure that specific test data is available to all test methods in a class without recreating it. Which method should be used?

Question 65mediummultiple choice

Read the full Testing Debugging And Deployment explanation →

A developer is debugging a process that involves asynchronous Apex. Which Debug Log setting is required to see the output of the @future method?

Question 66easymultiple choice

Read the full Testing Debugging And Deployment explanation →

Which tool is best suited for migrating metadata between two related Salesforce Orgs using a UI-based approach?

Question 67mediummulti select

Read the full Testing Debugging And Deployment explanation →

Which THREE items are included in a debug log?

Question 68mediummultiple choice

Read the full Testing Debugging And Deployment explanation →

If a developer uses 'SeeAllData=true' in a test class, what are the primary risks?

Question 69mediummultiple choice

Read the full Testing Debugging And Deployment explanation →

A developer needs to see how much memory a specific Apex method is consuming. Which log category should be adjusted?

Question 70mediummultiple choice

Read the full Testing Debugging And Deployment explanation →

What is the primary function of a scratch org?

Question 71hardmultiple choice

Read the full Testing Debugging And Deployment explanation →

When testing a trigger, why should you avoid hard-coding IDs?

Question 72mediummultiple choice

Read the full Testing Debugging And Deployment explanation →

What is the primary benefit of using a Sandbox for development?

Question 73mediummulti select

Read the full Testing Debugging And Deployment explanation →

Which TWO features of @isTest(SeeAllData=true) should a developer be aware of?

Question 74easymultiple choice

Read the full Testing Debugging And Deployment explanation →

Which log level displays the most information?

Question 75mediummultiple choice

Read the full Testing Debugging And Deployment explanation →

A developer needs to check the status of a long-running batch job that was triggered by an Apex class. Where should they look?

Question 76hardmultiple choice

Read the full Testing Debugging And Deployment explanation →

A developer is writing a test for a method that performs a callout. How must the callout be handled?

Question 77hardmulti select

Read the full Testing Debugging And Deployment explanation →

Which THREE actions are best practices when deploying Apex classes to production?

Question 78mediummultiple choice

Read the full Testing Debugging And Deployment explanation →

How can a developer inspect the state of a private variable within a class during unit testing?

Question 79hardmultiple choice

Read the full Testing Debugging And Deployment explanation →

When using the Salesforce CLI to deploy, what is the 'check-only' flag used for?

Question 80mediummultiple choice

Read the full Testing Debugging And Deployment explanation →

Which approach is recommended to ensure test data is cleaned up?

Question 81mediummultiple choice

Read the full Testing Debugging And Deployment explanation →

A developer is receiving 'Too many SOQL queries' errors in a trigger. What is the most likely cause?

Question 82mediummulti select

Read the full Testing Debugging And Deployment explanation →

Which TWO of the following are valid ways to trigger an Apex test run?

Question 83hardmultiple choice

Read the full Testing Debugging And Deployment explanation →

What happens if a test class has a method annotated with @testSetup that fails to insert data?

Question 84mediummulti select

Read the full Testing Debugging And Deployment explanation →

Which THREE pieces of information are displayed in the Apex Test Execution page?

Question 85easymultiple choice

Read the full Testing Debugging And Deployment explanation →

What is the primary function of the 'Developer Console'?

Question 86mediummultiple choice

Read the full Testing Debugging And Deployment explanation →

A developer wants to log information specifically when a condition is met. Which method is most appropriate?

Question 87mediummultiple choice

Read the full Testing Debugging And Deployment explanation →

What happens if a developer creates a test method that does not contain any assertions?

Question 88mediummultiple choice

Read the full Testing Debugging And Deployment explanation →

Why should a developer ensure that test classes have at least 75% coverage for production deployment?

Question 89mediummultiple choice

Read the full Testing Debugging And Deployment explanation →

Which of the following describes the behavior of Test.stopTest()?

Question 90hardmulti select

Read the full Testing Debugging And Deployment explanation →

Which THREE things can a developer do with the Salesforce CLI?

Question 91mediummultiple choice

Read the full Testing Debugging And Deployment explanation →

When debugging a trigger, how can you view the flow of execution including entry and exit points of methods?

Question 92easymultiple choice

Read the full Testing Debugging And Deployment explanation →

What is a 'Change Set' used for?

Question 93mediummultiple choice

Read the full Testing Debugging And Deployment explanation →

How can a developer identify the most time-consuming SOQL query in a transaction?

Question 94mediummulti select

Read the full Testing Debugging And Deployment explanation →

Which TWO of the following are valid deployment tools?

Question 95easymultiple choice

Read the full Testing Debugging And Deployment explanation →

What is the result of a compilation error in an Apex class during deployment?

Question 96mediummultiple choice

Read the full Testing Debugging And Deployment explanation →

Which log level is best for finding logic flow issues without cluttering the log?

Question 97mediummultiple choice

Read the full Testing Debugging And Deployment explanation →

Why does a test fail if it tries to perform a callout without Test.setMock()?

Question 98hardmulti select

Read the full Testing Debugging And Deployment explanation →

Which THREE factors influence deployment success?

Question 99hardmultiple choice

Read the full Testing Debugging And Deployment explanation →

When is an Apex test run automatically executed?

Question 100mediummultiple choice

Read the full Testing Debugging And Deployment explanation →

What is the purpose of the 'Debug Log' Filter in the Developer Console?

Question 101easymultiple choice

Read the full Testing Debugging And Deployment explanation →

Which of these is NOT a valid testing best practice?

Question 102easymultiple choice

Read the full Testing Debugging And Deployment explanation →

A developer needs to write a test class for an Apex class that performs DML operations. Which annotation must be used to define the class as a test class?

Question 103mediummultiple choice

Read the full Testing Debugging And Deployment explanation →

You are debugging a performance issue in an Apex trigger. You want to see the database resource usage. Which debug log level should you set for the Database category?

Question 104easymultiple choice

Read the full Testing Debugging And Deployment explanation →

When deploying metadata from a sandbox to production using Change Sets, what is the first requirement?

Question 105hardmultiple choice

Read the full Testing Debugging And Deployment explanation →

You are using the Salesforce CLI to deploy code. Which command is used to deploy source code from a local project to an org?

Question 106mediummultiple choice

Read the full Testing Debugging And Deployment explanation →

A developer needs to access private methods in an Apex class for unit testing without making them public. Which annotation is the most appropriate?

Question 107mediummultiple choice

Read the full Testing Debugging And Deployment explanation →

What is the primary purpose of the 'System.debug()' statement?

Question 108mediummultiple choice

Read the full Testing Debugging And Deployment explanation →

What must be true for a developer to deploy Apex code to a production environment?

Question 109hardmultiple choice

Read the full Testing Debugging And Deployment explanation →

When testing asynchronous Apex, how do you ensure that the scheduled job has finished before asserting results?

Question 110hardmultiple choice

Read the full Testing Debugging And Deployment explanation →

When using the Metadata API to deploy components, which XML file must be present to define the components included in the package?

Question 111mediummulti select

Read the full Testing Debugging And Deployment explanation →

Which THREE of the following are true about Apex test data setup?

Question 112hardmultiple choice

Read the full Testing Debugging And Deployment explanation →

A developer is using 'Test.isRunningTest()' in their production code. Why is this generally considered a poor practice?

Question 113mediummultiple choice

Read the full Testing Debugging And Deployment explanation →

You need to inspect the heap size during the execution of a long-running batch job. Which debug log category should you monitor?

Question 114mediummulti select

Read the full Testing Debugging And Deployment explanation →

Which THREE of the following items can be viewed in a debug log?

Question 115easymulti select

Read the full Testing Debugging And Deployment explanation →

Which THREE of the following are benefits of using the Salesforce CLI for deployment?

Question 1hardmultiple choice

Read the full Testing Debugging And Deployment explanation →

A developer wants to view real-time debug log streaming in their local environment using the Salesforce CLI. Which command should the developer execute?

Question 2easymultiple choice

Read the full Testing Debugging And Deployment explanation →

A developer has written a test method that requires a large volume of test data to be set up. To avoid writing duplicate data setup code across multiple test methods in the same class, which annotation should the developer use?

Question 3easymultiple choice

Read the full Testing Debugging And Deployment explanation →

A developer needs to write a unit test to verify that a trigger correctly inserts related Task records when a custom object record is created. Which annotation should the developer place on the test class method to ensure it runs correctly and can access existing org data if needed?

Question 4easymultiple choice

Read the full Testing Debugging And Deployment explanation →

A developer is preparing to deploy metadata changes from a sandbox to a production org using Outbound Change Sets. Where must the administrator or developer establish the connection between the two organizations?

Question 5mediummultiple choice

Read the full Testing Debugging And Deployment explanation →

A developer runs unit tests in the Developer Console and notices that one test method fails when run as part of the entire test class, but passes successfully when run in isolation. What is the most likely cause of this issue?

Question 6hardmultiple choice

Read the full Testing Debugging And Deployment explanation →

A developer is writing a unit test and needs to assert that a specific custom exception was thrown during invalid input processing. Which pattern should the developer use?

Question 7mediummulti select

Read the full Testing Debugging And Deployment explanation →

Which THREE statements are true regarding Salesforce debug logs? (Choose three.)

Question 8hardmulti select

Read the full Testing Debugging And Deployment explanation →

Which THREE features are supported in Salesforce scratch orgs? (Choose three.)

Question 9mediummulti select

Read the full Testing Debugging And Deployment explanation →

Which TWO circumstances will cause an Apex unit test method to fail? (Choose two.)

Question 10mediummultiple choice

Read the full Testing Debugging And Deployment explanation →

A developer wants to ensure that test methods in a managed package upgrade test all triggers and classes, and needs to bypass existing organization test data to use only packaged data. Which annotation parameter should be used?

Question 11mediummultiple choice

Read the full Testing Debugging And Deployment explanation →

A developer is deploying metadata from a sandbox to a production org using Salesforce CLI. Which command should the developer use to validate the deployment without actually saving components to the target organization?

Question 12mediummulti select

Read the full Testing Debugging And Deployment explanation →

A developer needs to write a unit test that verifies user permissions and accessibility before executing business logic. Which TWO methods or classes are valid for simulating different user contexts in Apex tests? (Choose two.)

Question 13easymultiple choice

Read the full Testing Debugging And Deployment explanation →

Which annotation allows a private method in an Apex class to be visible to unit test classes for assertion purposes?

Question 14mediummulti select

Read the full Testing Debugging And Deployment explanation →

When deploying code using Unmanaged Change Sets between connected Salesforce organizations, which TWO limitations or behaviors apply? (Choose two.)

Question 15easymultiple choice

Read the full Testing Debugging And Deployment explanation →

Which annotation is required for a method to be recognized by the Apex test runner?

Question 16hardmultiple choice

Read the full Testing Debugging And Deployment explanation →

When deploying via Metadata API, what happens if a test class fails during the deployment?

Question 17mediummulti select

Read the full Testing Debugging And Deployment explanation →

Which TWO of the following are valid ways to specify which tests to run in the Salesforce CLI?

Question 18hardmultiple choice

Read the full Testing Debugging And Deployment explanation →

Why must you use Test.startTest() when testing asynchronous Apex code?

Question 19easymultiple choice

Read the full Testing Debugging And Deployment explanation →

Which utility class is used to assert that code behaves as expected in Apex tests?

Question 20mediummultiple choice

Read the full Testing Debugging And Deployment explanation →

A developer needs to measure the performance of a SOQL query. Which log category and level should be used?

Question 21mediummultiple choice

Read the full Testing Debugging And Deployment explanation →

A developer needs to test a feature that relies on the current time. Which method should be used to simulate time?

Question 22hardmultiple choice

Read the full Testing Debugging And Deployment explanation →

Why might a deployment fail due to 'Apex classes do not have sufficient coverage'?

Question 23hardmultiple choice

Read the full Testing Debugging And Deployment explanation →

What is the primary constraint on using @testSetup?

Question 24hardmultiple choice

Read the full Testing Debugging And Deployment explanation →

When testing a class that depends on Custom Settings, what is the best practice?

Question 25mediummultiple choice

Read the full Testing Debugging And Deployment explanation →

How can you run tests for a specific namespace using the CLI?

Question 26mediummultiple choice

Read the full Testing Debugging And Deployment explanation →

What is the maximum number of debug logs that can be stored per user?

Question 27hardmultiple choice

Read the full Testing Debugging And Deployment explanation →

A developer needs to reset the governor limits within a test method to verify functionality that processes large amounts of records. Which method should be used?

Question 28easymultiple choice

Read the full Testing Debugging And Deployment explanation →

Where can a developer view the generated debug logs for an Apex execution in the Salesforce UI?

Question 29mediummultiple choice

Read the full Testing Debugging And Deployment explanation →

A developer is writing a test class that requires several custom objects to be populated with data. What is the most efficient way to handle this across multiple test methods?

Question 30easymultiple choice

Read the full Testing Debugging And Deployment explanation →

Which of the following is a limitation of Change Sets?

Question 31easymultiple choice

Read the full Testing Debugging And Deployment explanation →

Which tool is best suited for running all tests in an org and viewing the code coverage percentages?

Question 32easymulti select

Read the full Testing Debugging And Deployment explanation →

Which TWO of the following are valid ways to execute Apex unit tests in Salesforce?

Question 33hardmulti select

Read the full Testing Debugging And Deployment explanation →

Which TWO of the following are limitations when deploying using the Metadata API?

Question 34hardmulti select

Read the full Testing Debugging And Deployment explanation →

Which TWO of the following are required to successfully use the 'Test.startTest()' and 'Test.stopTest()' pattern for testing batch Apex?

Question 35hardmulti select

Read the full Testing Debugging And Deployment explanation →

Which TWO of the following are true about the 'Debug Log' settings in the Setup menu?

Question 36hardmultiple choice

Read the full Testing Debugging And Deployment explanation →

A developer deploys a new Apex class to production using the Salesforce CLI and a manifest file. The deployment succeeds, but a scheduled Apex job that calls this class now fails at runtime with a 'System.TypeException: Invalid conversion' error that never appeared in the sandbox. The sandbox and production have identical Apex code and API versions, but production has several record types and picklist values that are not present in the sandbox. Which action should the developer take to most reliably reproduce and diagnose the failure before redeploying?

Question 37mediummultiple choice

Read the full Testing Debugging And Deployment explanation →

A developer wrote an Apex test class that inserts 200 Account records and then queries them to verify a trigger populated a custom field. The test fails with a System.LimitException: Too many SOQL queries: 101 error. The test class uses @isTest(SeeAllData=false) and contains a single test method. Which change should the developer make to resolve the error while preserving the test's intent?

Question 38hardmulti select

Read the full Testing Debugging And Deployment explanation →

A developer is preparing to deploy a set of Apex classes, Visualforce pages, and custom objects from a sandbox to production using the Metadata API. The deployment must succeed on the first attempt. Which two actions should the developer take before deploying? (Choose two.)

Question 39easymultiple choice

Read the full Testing Debugging And Deployment explanation →

A developer needs to debug an Apex trigger that is not firing as expected when a new Case is created from the Salesforce UI. The developer wants to see detailed information about the trigger's execution, including variable assignments and SOQL queries. Which tool should the developer use to capture this information in real time?

Question 40mediummultiple choice

Read the full Testing Debugging And Deployment explanation →

A developer is writing a unit test for an Apex class that calculates discounts based on Account revenue. The test needs to verify that a custom exception, DiscountException, is thrown when the revenue is negative. Which approach should the developer use to assert that the exception is thrown?

Question 41mediummultiple choice

Read the full Testing Debugging And Deployment explanation →

A developer wants to test an asynchronous future method. Where must the developer place the asynchronous code execution so that it runs synchronously and within the test context?

Question 42mediummultiple choice

Read the full Testing Debugging And Deployment explanation →

A developer is analyzing a debug log and notices that it is truncated because it exceeded the maximum file size limit. Which action should the developer take to capture only the relevant Apex code execution details without exceeding the limit?

Question 43hardmultiple choice

Read the full Testing Debugging And Deployment explanation →

A developer receives a System.LimitException: Too many SOQL queries: 101 when running a complex unit test. The test class inserts a large volume of test records that inadvertently cause a trigger to execute multiple queries inside a loop. What is the most effective way to reset the governor limits specifically for the code being tested?

Question 44hardmultiple choice

Read the full Testing Debugging And Deployment explanation →

A developer is writing a unit test that executes under a specific user context to verify sharing rules. Which method should the developer use to specify the user for the subsequent test operations?

Question 45mediummultiple choice

Read the full Testing Debugging And Deployment explanation →

A developer is writing a test method that performs a callout to an external REST service. Which interface must the developer implement to provide mock responses during the unit test execution?

Question 46mediummultiple choice

Read the full Testing Debugging And Deployment explanation →

A developer is using Salesforce CLI to create a temporary environment for feature development and testing that includes all source code and shape settings. Which CLI command should the developer use to create this temporary environment?

Question 47mediummultiple choice

Read the full Testing Debugging And Deployment explanation →

A developer is deploying a profile and custom fields using an Unmanaged Change Set. Upon deployment, some custom field permissions fail to apply correctly in production. What is the most likely cause of this behavior?

Question 48hardmultiple choice

Read the full Testing Debugging And Deployment explanation →

A developer has written a Lightning Web Component and Apex controller, and wants to deploy only these specific metadata components to a production org using Salesforce CLI without relying on change sets. Which command is appropriate?

Question 49easymultiple choice

Read the full Testing Debugging And Deployment explanation →

A developer needs to verify code coverage across an entire Apex organization before deploying code to production. What is the minimum overall Apex code coverage required by Salesforce for production deployment?

Question 50easymultiple choice

Read the full Testing Debugging And Deployment explanation →

A developer wants to inspect the code coverage of individual classes directly within the Salesforce Developer Console. Under which tab can the developer view this breakdown?

Question 51easymulti select

Read the full Testing Debugging And Deployment explanation →

Which TWO actions occur automatically when Test.stopTest() is called in an Apex unit test? (Choose two.)

Question 52easymulti select

Read the full Testing Debugging And Deployment explanation →

Which TWO practices are considered best practices when writing Apex unit tests in Salesforce? (Choose two.)

Question 53hardmulti select

Read the full Testing Debugging And Deployment explanation →

Which THREE items are best practices when setting up test data using @TestSetup methods? (Choose three.)

Question 54mediummulti select

Read the full Testing Debugging And Deployment explanation →

Which TWO conditions must be met for an Apex test method to successfully execute and contribute to code coverage? (Choose two.)

Question 55hardmulti select

Read the full Testing Debugging And Deployment explanation →

Which TWO tools or APIs can a developer use to deploy metadata between Salesforce organizations? (Choose two.)

Question 56easymultiple choice

Read the full Testing Debugging And Deployment explanation →

A developer is writing an Apex test class and needs to reset governor limits before executing a block of asynchronous code testing. Which method should the developer use?

Question 57easymultiple choice

Read the full Testing Debugging And Deployment explanation →

Where should a developer look in the Salesforce user interface to inspect detailed system debug logs generated during a specific transaction?

Question 58hardmultiple choice

Read the full Testing Debugging And Deployment explanation →

An Apex trigger performs a callout to an external web service and a developer is writing a unit test for this trigger. How should the developer handle the callout during the test execution?

Question 59hardmultiple choice

Read the full Testing Debugging And Deployment explanation →

An asynchronous @future method is called from within an Apex test method. When are the statements inside the @future method actually executed during the test run?

Question 60hardmultiple choice

Read the full Testing Debugging And Deployment explanation →

When calling Test.startTest() and Test.stopTest(), what happens to the governor limits?

Question 61mediummultiple choice

Read the full Testing Debugging And Deployment explanation →

What is the primary purpose of the Salesforce CLI in a CI/CD pipeline?

Question 62hardmulti select

Read the full Testing Debugging And Deployment explanation →

A developer is troubleshooting a complex set of triggers and wants to restrict the amount of debug log data captured for a specific integration user. Which THREE actions can the developer take to manage debug logs effectively? (Choose three.)

Question 63mediummultiple choice

Read the full Testing Debugging And Deployment explanation →

A developer needs to verify that a trigger correctly handles bulk data, specifically 250 records. What is the most effective approach?

Question 64mediummultiple choice

Read the full Testing Debugging And Deployment explanation →

A developer wants to ensure that specific test data is available to all test methods in a class without recreating it. Which method should be used?

Question 65mediummultiple choice

Read the full Testing Debugging And Deployment explanation →

A developer is debugging a process that involves asynchronous Apex. Which Debug Log setting is required to see the output of the @future method?

Question 66easymultiple choice

Read the full Testing Debugging And Deployment explanation →

Which tool is best suited for migrating metadata between two related Salesforce Orgs using a UI-based approach?

Question 67mediummulti select

Read the full Testing Debugging And Deployment explanation →

Which THREE items are included in a debug log?

Question 68mediummultiple choice

Read the full Testing Debugging And Deployment explanation →

If a developer uses 'SeeAllData=true' in a test class, what are the primary risks?

Question 69mediummultiple choice

Read the full Testing Debugging And Deployment explanation →

A developer needs to see how much memory a specific Apex method is consuming. Which log category should be adjusted?

Question 70mediummultiple choice

Read the full Testing Debugging And Deployment explanation →

What is the primary function of a scratch org?

Question 71hardmultiple choice

Read the full Testing Debugging And Deployment explanation →

When testing a trigger, why should you avoid hard-coding IDs?

Question 72mediummultiple choice

Read the full Testing Debugging And Deployment explanation →

What is the primary benefit of using a Sandbox for development?

Question 73mediummulti select

Read the full Testing Debugging And Deployment explanation →

Which TWO features of @isTest(SeeAllData=true) should a developer be aware of?

Question 74easymultiple choice

Read the full Testing Debugging And Deployment explanation →

Which log level displays the most information?

Question 75mediummultiple choice

Read the full Testing Debugging And Deployment explanation →

A developer needs to check the status of a long-running batch job that was triggered by an Apex class. Where should they look?

Question 76hardmultiple choice

Read the full Testing Debugging And Deployment explanation →

A developer is writing a test for a method that performs a callout. How must the callout be handled?

Question 77hardmulti select

Read the full Testing Debugging And Deployment explanation →

Which THREE actions are best practices when deploying Apex classes to production?

Question 78mediummultiple choice

Read the full Testing Debugging And Deployment explanation →

How can a developer inspect the state of a private variable within a class during unit testing?

Question 79hardmultiple choice

Read the full Testing Debugging And Deployment explanation →

When using the Salesforce CLI to deploy, what is the 'check-only' flag used for?

Question 80mediummultiple choice

Read the full Testing Debugging And Deployment explanation →

Which approach is recommended to ensure test data is cleaned up?

Question 81mediummultiple choice

Read the full Testing Debugging And Deployment explanation →

A developer is receiving 'Too many SOQL queries' errors in a trigger. What is the most likely cause?

Question 82mediummulti select

Read the full Testing Debugging And Deployment explanation →

Which TWO of the following are valid ways to trigger an Apex test run?

Question 83hardmultiple choice

Read the full Testing Debugging And Deployment explanation →

What happens if a test class has a method annotated with @testSetup that fails to insert data?

Question 84mediummulti select

Read the full Testing Debugging And Deployment explanation →

Which THREE pieces of information are displayed in the Apex Test Execution page?

Question 85easymultiple choice

Read the full Testing Debugging And Deployment explanation →

What is the primary function of the 'Developer Console'?

Question 86mediummultiple choice

Read the full Testing Debugging And Deployment explanation →

A developer wants to log information specifically when a condition is met. Which method is most appropriate?

Question 87mediummultiple choice

Read the full Testing Debugging And Deployment explanation →

What happens if a developer creates a test method that does not contain any assertions?

Question 88mediummultiple choice

Read the full Testing Debugging And Deployment explanation →

Why should a developer ensure that test classes have at least 75% coverage for production deployment?

Question 89mediummultiple choice

Read the full Testing Debugging And Deployment explanation →

Which of the following describes the behavior of Test.stopTest()?

Question 90hardmulti select

Read the full Testing Debugging And Deployment explanation →

Which THREE things can a developer do with the Salesforce CLI?

Question 91mediummultiple choice

Read the full Testing Debugging And Deployment explanation →

When debugging a trigger, how can you view the flow of execution including entry and exit points of methods?

Question 92easymultiple choice

Read the full Testing Debugging And Deployment explanation →

What is a 'Change Set' used for?

Question 93mediummultiple choice

Read the full Testing Debugging And Deployment explanation →

How can a developer identify the most time-consuming SOQL query in a transaction?

Question 94mediummulti select

Read the full Testing Debugging And Deployment explanation →

Which TWO of the following are valid deployment tools?

Question 95easymultiple choice

Read the full Testing Debugging And Deployment explanation →

What is the result of a compilation error in an Apex class during deployment?

Question 96mediummultiple choice

Read the full Testing Debugging And Deployment explanation →

Which log level is best for finding logic flow issues without cluttering the log?

Question 97mediummultiple choice

Read the full Testing Debugging And Deployment explanation →

Why does a test fail if it tries to perform a callout without Test.setMock()?

Question 98hardmulti select

Read the full Testing Debugging And Deployment explanation →

Which THREE factors influence deployment success?

Question 99hardmultiple choice

Read the full Testing Debugging And Deployment explanation →

When is an Apex test run automatically executed?

Question 100mediummultiple choice

Read the full Testing Debugging And Deployment explanation →

What is the purpose of the 'Debug Log' Filter in the Developer Console?

Question 101easymultiple choice

Read the full Testing Debugging And Deployment explanation →

Which of these is NOT a valid testing best practice?

Question 102easymultiple choice

Read the full Testing Debugging And Deployment explanation →

A developer needs to write a test class for an Apex class that performs DML operations. Which annotation must be used to define the class as a test class?

Question 103mediummultiple choice

Read the full Testing Debugging And Deployment explanation →

You are debugging a performance issue in an Apex trigger. You want to see the database resource usage. Which debug log level should you set for the Database category?

Question 104easymultiple choice

Read the full Testing Debugging And Deployment explanation →

When deploying metadata from a sandbox to production using Change Sets, what is the first requirement?

Question 105hardmultiple choice

Read the full Testing Debugging And Deployment explanation →

You are using the Salesforce CLI to deploy code. Which command is used to deploy source code from a local project to an org?

Question 106mediummultiple choice

Read the full Testing Debugging And Deployment explanation →

A developer needs to access private methods in an Apex class for unit testing without making them public. Which annotation is the most appropriate?

Question 107mediummultiple choice

Read the full Testing Debugging And Deployment explanation →

What is the primary purpose of the 'System.debug()' statement?

Question 108mediummultiple choice

Read the full Testing Debugging And Deployment explanation →

What must be true for a developer to deploy Apex code to a production environment?

Question 109hardmultiple choice

Read the full Testing Debugging And Deployment explanation →

When testing asynchronous Apex, how do you ensure that the scheduled job has finished before asserting results?

Question 110hardmultiple choice

Read the full Testing Debugging And Deployment explanation →

When using the Metadata API to deploy components, which XML file must be present to define the components included in the package?

Question 111mediummulti select

Read the full Testing Debugging And Deployment explanation →

Which THREE of the following are true about Apex test data setup?

Question 112hardmultiple choice

Read the full Testing Debugging And Deployment explanation →

A developer is using 'Test.isRunningTest()' in their production code. Why is this generally considered a poor practice?

Question 113mediummultiple choice

Read the full Testing Debugging And Deployment explanation →

You need to inspect the heap size during the execution of a long-running batch job. Which debug log category should you monitor?

Question 114mediummulti select

Read the full Testing Debugging And Deployment explanation →

Which THREE of the following items can be viewed in a debug log?

Question 115easymulti select

Read the full Testing Debugging And Deployment explanation →