1Z0-997-26 Timed Practice Test 2 — 10 Questions

Question 1

An organization is designing a disaster recovery strategy using Exadata Database Service on Dedicated Infrastructure. They require an Recovery Time Objective (RTO) of less than 30 seconds and a Recovery Point Objective (RPO) of zero for an enterprise database handling mission-critical workloads. Which Data Guard configuration should be implemented?

10 minute time limit — choose an answer to begin.

Accepted Answer

Oracle Active Data Guard configured in Maximum Protection mode with synchronous transport. RPO of zero requires synchronous redo transport so no committed transaction can be lost, and RTO under 30 seconds requires a standby that is already mounted, open read-only, and ready for immediate failover. Maximum Protection mode with Active Data Guard satisfies both: SYNC transport guarantees zero data loss, and Active Data Guard keeps the standby continuously applying redo so failover is near-instant. This is the only option that meets both objectives simultaneously.

Answer

Manual RMAN backup replication via OCI Object Storage every 15 minutes

Answer

Oracle Data Guard configured in Maximum Performance mode with asynchronous transport

Answer

Oracle GoldenGate real-time replication with asynchronous extract configurations

Question 2

You want to track API calls made by a specific user who deleted a critical production database in OCI. Which OCI service log should you examine?

Accepted Answer

OCI Audit Log. OCI Audit Log records all API calls made against OCI resources, including the identity of the caller, source IP, timestamp, request action, and target resource. A database deletion is an API operation (e.g., DeleteAutonomousDatabase or TerminateDbSystem), so the Audit Log is the authoritative source to identify which user performed it.

Answer

OCI VCN Flow Log

Answer

OCI APM Transaction Log

Answer

OCI Database Alert Log

Question 3

You are optimizing the cost and performance of an Exadata Database Service on Dedicated Infrastructure environment hosting multiple large databases. Which THREE practices should you implement to achieve optimal resource utilization and cost efficiency?

Accepted Answer

Consolidate multiple non-CDB databases into a single Multitenant Container Database (CDB) with multiple PDBs.. Option A is correct because consolidating non-CDB databases into a single Multitenant Container Database with multiple PDBs improves consolidation density, reduces per-database overhead, and enables efficient resource sharing through PDB-level resource management on Exadata. Option B is correct because Exadata Smart Flash Cache policies (for example, keeping OLTP data cached while marking DSS scans as non-cacheable) ensure flash is used for latency-sensitive random I/O and not polluted by large sequential scans, improving performance and deferring costly capacity upgrades. Option E is correct because Exadata Database Service on Dedicated Infrastructure supports dynamic OCPU scaling, so matching OCPU counts to peak and off-peak schedules avoids paying for idle compute while preserving performance during demand peaks. Option C is incorrect because moving table data to standard Block Volume bypasses Exadata storage servers, eliminating Smart Scan, storage indexes, and Exadata flash benefits, which hurts performance and cost efficiency. Option D is incorrect because disabling automatic backups removes data protection and is not a valid cost-optimization practice; backup costs should be managed through retention and tiering policies instead.

Answer

Migrate all table data to standard Block Volume storage to bypass Exadata storage servers.

Answer

Disable automatic backups entirely to save OCI Object Storage costs.

Question 4

An enterprise architect is designing a centralized log management solution in Oracle Cloud Infrastructure (OCI) Logging Analytics. The team needs to ingest logs from various heterogeneous sources, including custom applications, Oracle databases, and third-party firewalls, while ensuring that the log data is properly parsed and enriched without requiring custom regex development for every vendor format. Which feature should the architect leverage to meet this requirement?

Accepted Answer

OCI Logging Analytics out-of-the-box parsers and source configurations along with custom parsers built via the Log Parser Workbench.. OCI Logging Analytics ships with a large library of out-of-the-box parsers and source configurations that recognize common vendor formats (Oracle DB, firewalls, OS logs, etc.), so heterogeneous logs are parsed and enriched without writing regex from scratch. When a format is not covered, the Log Parser Workbench provides a GUI to build and validate custom parsers, which is exactly the requirement stated. This combination delivers structured fields and enrichment (e.g., geo-location, threat intel) at ingest time.

Answer

OCI Telemetry Data Plane auto-extractors that automatically normalize all logs into a unified OpenTelemetry schema.

Answer

OCI Object Storage lifecycle rules configured with transformation policies to convert raw text logs into structured JSON formats.

Answer

OCI Streaming Service combined with Oracle Functions to manually parse every raw log payload prior to storage.

Question 5

An OCI Administrator needs to set up proactive alerting when the CPU utilization of a production Compute instance exceeds 90% for a sustained period of 15 minutes. Which OCI service should be configured to evaluate this metric and trigger notifications via an email endpoint?

Accepted Answer

OCI Monitoring Service Alarms combined with OCI Notifications Service topics.. OCI Monitoring Service alarms evaluate metric streams against thresholds (e.g., CPU utilization > 90% for 15 minutes) and trigger actions when the condition is met. The alarm publishes to an OCI Notifications Service topic, which delivers the alert to an email endpoint. This is the standard, native pattern for proactive metric-based alerting in OCI.

Answer

OCI Health Checks configured with custom ICMP ping probes targeting the private IP of the instance.

Answer

OCI Events Service configured with a rule filtering for Compute metric threshold violations.

Answer

OCI Logging Analytics with scheduled saved search alerts.

Question 6

Your organization is planning to migrate file shares from an on-premises Windows environment (SMB protocol) to OCI. Which THREE factors or options should you consider when selecting the appropriate OCI storage architecture for Windows file shares? (Choose three.)

Accepted Answer

Deploying Windows Server instances on OCI Compute attached to high-performance OCI Block Volumes to act as native SMB file servers.. Option A is correct because deploying Windows Server instances on OCI Compute with attached high-performance Block Volumes lets you run native SMB file servers, preserving SMB semantics such as file locking, ACLs, and Active Directory integration for Windows clients. Option D is correct because OCI Marketplace partner solutions offer enterprise NAS appliances that natively support SMB/CIFS on OCI, providing a managed, protocol-compatible alternative to self-managed Windows file servers. Option E is correct because OCI File Storage Service is an NFSv3-based service and does not natively speak SMB/CIFS, so it cannot directly serve Windows SMB shares without third-party gateways or workarounds. Option B is incorrect because OCI Object Storage is an object store accessed via REST/S3 APIs, not a POSIX/SMB file system, and it does not provide the file locking and share semantics required for active SMB network drives. Option C is incorrect because OCI Archive Storage is a cloud archive tier accessed over the network via APIs, and there is no such thing as attaching it to Windows clients via USB cable simulation.

Answer

Using OCI Object Storage as a direct replacement for active SMB shared network drives requiring file locking.

Answer

Attaching OCI Archive Storage directly to Windows clients via USB cable simulation.

Question 7

You are troubleshooting a microservice on OKE that is experiencing intermittent 502 Bad Gateway errors when communicating with another internal service. The application uses Kubernetes ClusterIP services for discovery. You suspect DNS resolution failure within the cluster. Which diagnostic tool and approach should you use inside the OKE cluster?

Accepted Answer

Deploy a temporary diagnostic container pod (such as netshoot) and test DNS resolution using nslookup against CoreDNS.. Deploying a temporary diagnostic container pod such as netshoot and testing DNS resolution with nslookup against CoreDNS is the correct approach. This allows you to verify whether the cluster's DNS service (CoreDNS) is resolving the internal service name correctly from within a pod, which directly addresses the suspected DNS resolution failure causing 502 errors. It is a standard Kubernetes troubleshooting technique that isolates DNS issues from application or network issues.

Answer

Check the OCI VCN internet gateway route table.

Answer

Review OCI Cloud Guard threat detection policies.

Answer

Restart the OCI API Gateway service.

Question 8

You are configuring the OCI-Azure Interconnect to link an OCI Virtual Cloud Network (VCN) with an Azure Virtual Network (VNet). You have already established the FastConnect and ExpressRoute circuits. What is the mandatory next step to enable cross-cloud routing between the OCI Dynamic Routing Gateway (DRG) and the Azure Virtual Network Gateway?

Accepted Answer

Establish a BGP session between the OCI DRG and the Azure Virtual Network Gateway over the FastConnect/ExpressRoute circuit.. After establishing the FastConnect and ExpressRoute circuits, the mandatory step to enable cross-cloud routing is to establish a BGP session between the OCI DRG and the Azure Virtual Network Gateway over the interconnected circuits. BGP exchanges routes between the two clouds so that the VCN and VNet can route traffic to each other. Without BGP peering, the physical circuits are up but no routes are exchanged.

Answer

Configure an OCI Service Gateway to route traffic to Azure services directly.

Answer

Attach the Azure VNet directly to an OCI Local Peering Gateway (LPG).

Answer

Deploy an OCI NAT Gateway to translate Azure private IP addresses into OCI public IP addresses.

Question 9

An architect is configuring Oracle Autonomous Database Disaster Recovery with cross-region Data Guard. The primary database is in Ashburn, and the standby is in Phoenix. You execute a switchover operation. What happens to the connection strings (such as tnsnames.ora entries) used by client applications?

Accepted Answer

Client connection strings remain valid; applications reconnect, and the regional endpoint automatically routes traffic to the new primary.. When using Oracle Autonomous Database with cross-region Data Guard, the connection strings (such as those in tnsnames.ora) remain valid after a switchover because the regional endpoint automatically routes traffic to the new primary database. Applications reconnect without any changes to their configuration. This is a key benefit of the managed service, which abstracts the underlying infrastructure changes.

Answer

The database IP addresses change, requiring manual DNS A-record updates in OCI DNS.

Answer

You must manually regenerate new wallet zip files and redeploy them to all application servers.

Answer

Client applications must be rewritten to use hardcoded IP addresses instead of TNS names.

Question 10

Which THREE strategies can be implemented in OCI to mitigate the impact of a regional availability outage on a multi-tier web application? (Choose three.)

Accepted Answer

Deploying application tiers across two OCI regions with DNS Traffic Management health checks for automated failover. Option A is correct because deploying the application tiers across two OCI regions and using OCI DNS Traffic Management with health checks enables automated failover: when health checks detect the primary region's endpoints as unhealthy, traffic is steered to the secondary region, keeping the multi-tier app reachable during a regional outage. Option B is correct because replicating critical block volumes (via block volume replication/Cross-Region Replication) and object storage data (via Object Storage replication policies or rclone/OCI CLI copy) to the secondary region ensures the data needed to run the application survives a regional failure and can be attached/accessed in the DR region. Option D is correct because Oracle Data Guard provides physical or logical standby databases in a secondary region with redo transport and role transitions (switchover/failover), which is the standard OCI approach to keep the database tier available when the primary region is lost. Option C is not correct because a single Availability Domain deployment with daily backups offers no live failover capability and cannot mitigate a regional outage, since both the AD and the backups in the same region may be affected. Option E is not correct because synchronous multi-master writes over the public internet between regions introduce unacceptable latency and consistency/locking problems, and OCI does not support such a multi-master database topology as a viable HA/DR strategy.

Answer

Relying on a single Availability Domain deployment with automated daily backups

Answer

Running all database write operations simultaneously against both regions with synchronous multi-master locking over public internet