MB-330 Implement Warehouse and Transportation Management — Timed 15 Questions

Question 1

A warehouse manager wants to ensure that picking work is automatically triggered as soon as a sales order is released to the warehouse. Which setup must be configured to achieve this automation?

Accepted Answer

Configure a Wave template with the Automate wave creation option enabled.. To automate work creation upon order release, you must configure the Wave template. By enabling 'Automate wave creation' and ensuring the 'Automate release of wave' parameter is active, the system bypasses manual intervention. This is critical for high-volume environments where reducing latency between order entry and picking is essential for meeting tight shipping SLAs and maintaining throughput efficiency.

Answer

Enable Auto-release in the Warehouse management parameters.

Answer

Assign a default Work template to the item group.

Answer

Set the Picking strategy to 'Order' on the Mobile device menu item.

Question 2

Which TWO settings are required to enable cross-docking in Warehouse management? (Choose two)

Accepted Answer

Define a Cross-docking template.. Cross-docking requires a specific setup to bypass traditional put-away logic. You must define a Cross-docking template to identify the incoming supply and a location directive that supports cross-docking placement. These settings work in tandem to redirect inventory directly to a shipping or staging location, which is critical for reducing handling times in Just-In-Time supply chain environments.

Answer

Enable the 'Direct delivery' checkbox on the Sales order line.

Answer

Assign a 'Dock' type to the Warehouse zones.

Answer

Set the Work template to use 'Manual' wave processing.

Question 3

A company requires that warehouse workers be prompted to enter a 'Batch number' during the put-away process for specific items. How should you configure this?

Accepted Answer

Set the Work confirmation on the Mobile device menu item.. To enforce batch capture during put-away, you must configure the 'Work confirmation' settings on the mobile device menu item. Specifically, enabling the 'Batch number' confirmation check forces the user to scan or enter the information. This is vital for regulatory compliance in industries like food and pharmaceuticals, where precise inventory tracking and batch genealogy are legally required for safety.

Answer

Enable 'Batch tracking' on the Item model group.

Answer

Create a new Location directive for Batch items.

Answer

Add a 'Batch' field to the Work template.

Question 4

Which THREE conditions must be met for the system to automatically suggest a location during the put-away process? (Choose three)

Accepted Answer

The Location directive must have a valid query matching the item.. Automatic location suggestions rely on the correct integration of Location directives, Directive codes, and Location profiles. The system must find a valid location that matches the directive's query, possesses enough capacity, and is permitted by the location profile's restrictions. This ensures that warehouse space is utilized optimally and that inventory is stored in appropriate areas based on business rules.

Answer

The Location profile must allow mixed items.

Answer

The Location profile must have 'Allow cycle counting' enabled.

Question 5

Which functionality allows you to group multiple picking work orders into a single pick list for a worker?

Accepted Answer

Work grouping. Work pools and Work grouping allow for the consolidation of multiple work orders. This is a crucial optimization technique in warehouse management to reduce the number of trips a worker makes to the same aisle. By grouping tasks, you increase the efficiency of picking operations, ensuring that the worker maximizes their time and effort on the floor.

Answer

Wave templates

Answer

Location directives

Answer

Cycle counting

Question 6

Which field on the Mobile device menu item controls whether the user is prompted to scan the License plate?

Accepted Answer

Generate license plate. The 'License plate' tracking and 'Generate license plate' settings on the mobile device menu item dictate if the worker must scan an existing plate or if the system should create one. This is essential for controlling warehouse accuracy, as license plate tracking is the foundational component for inventory visibility within modern Dynamics 365 warehouse operations.

Answer

Work confirmation

Answer

Mode of delivery

Answer

Inventory status

Question 7

You are configuring a new warehouse layout where high-velocity items must be picked from a dedicated floor-level area before replenishment occurs from bulk storage. Which strategy should you configure in the Work template to ensure the system prioritizes these locations?

Accepted Answer

Location directive strategy: Fixed location usage. Location directives allow you to specify search strategies that control how the system allocates inventory. By configuring a location directive strategy for 'Fixed location usage', the system will prioritize picking from designated fixed locations before attempting to allocate inventory from random warehouse locations. This is crucial for warehouse efficiency, as it minimizes travel time for warehouse workers and ensures inventory rotation according to predefined storage rules in your warehouse management system.

Answer

Location directive strategy: Batch reservation

Answer

Location directive strategy: FEFO batch reservation

Answer

Location directive strategy: None

Question 8

You are setting up Wave demand replenishment for a retail warehouse. Which TWO parameters must be configured to ensure the system automatically creates replenishment work when a sales order wave is processed? (Select TWO)

Accepted Answer

Wave template with 'Automate replenishment work creation' enabled. To enable Wave demand replenishment, you must link a replenishment template to the wave process and ensure that the replenishment template itself is correctly configured to trigger during the wave execution. By defining these parameters, the system automatically evaluates inventory levels during the wave release process, creating work to move items from bulk to picking locations, ensuring that sales orders are never delayed by stock-outs in the primary picking area during fulfillment.

Answer

Warehouse management parameter: Enable automatic wave release

Answer

Inventory status update to 'Replenishment'

Answer

Work template with 'Replenishment' work order type

Question 9

You are implementing Transportation Management (TMS) and need to ensure that freight charges are accurately calculated based on the weight of the shipment. Which entity must be configured to link the weight-based pricing to the specific carrier?

Accepted Answer

Rate base. To calculate freight charges, you must configure a rate base that uses a rate master. The rate master connects the carrier to the pricing engine, and the rate base contains the specific pricing rules (such as weight breaks). By linking these, the system determines the cost based on the weight defined in the shipment, ensuring accurate billing and carrier selection based on the most cost-effective freight rates available in your setup.

Answer

Carrier fuel index

Answer

Shipping carrier service

Answer

Route plan

Question 10

You are troubleshooting a scenario where the system is not automatically creating work for an inbound purchase order. Which THREE of the following could be the cause? (Select THREE)

Accepted Answer

The mobile device menu item is not set to 'Purchase order item receiving'.. Inbound work creation is a complex process dependent on the alignment of the mobile device menu, the work template, and the location directive. If any of these are missing or misconfigured—such as an invalid query, a missing directive, or a menu item that doesn't trigger the workflow—the system fails to generate the task. Verifying these three areas is standard practice for diagnosing why inbound receiving processes are not moving inventory as expected.

Answer

The purchase order is not yet confirmed.

Answer

The item is not enabled for advanced warehouse management.

Question 11

Refer to the exhibit. You attempt to receive a purchase order in warehouse 'WH11', but the work is created with a status of 'Open' and does not move to 'Closed' after the put-away step. What is the most likely cause?

Accepted Answer

The 'StopAt' parameter prevents work closure.. The work template configuration, particularly the 'StopAt' setting, can influence how the system handles the completion of work steps. In some versions and configurations, if the sequence or the stop condition is misaligned with the expected warehouse process flow, the work may remain in an open state because the system does not recognize the final 'Put' step as a completion trigger for the entire work order.

Answer

The mobile device user is not authorized to close work.

Answer

The work template is missing the 'Work breakdown' setting.

Answer

The inventory status is not 'Available'.

Question 12

Your company uses 'License plate' tracking to manage inventory. You need to ensure that when a license plate is received, the system captures the weight of the entire license plate. Which setting must be enabled?

Accepted Answer

Configure weight on the physical product or license plate setup. The 'Weight' field on a license plate is managed through the license plate setup. By configuring the system to allow weight tracking at the license plate level, you ensure that as inventory is received and assigned to a specific plate, the total weight is accumulated. This is critical for transportation management, where accurate weight data is required for carrier calculation and truck capacity planning during the outbound shipping process.

Answer

Enable 'Weight' tracking in the Tracking dimension group

Answer

Enable 'Allow license plate weight' on the warehouse

Answer

Enable 'Weight' in the Inventory dimension group

Question 13

You are auditing a warehouse setup for 'Cycle counting'. Which THREE settings are required for the system to automatically generate cycle counting work? (Select THREE)

Accepted Answer

Cycle count threshold. Cycle counting requires a coordinated setup between the threshold-based rules and the work creation process. First, the cycle count threshold defines when a count is needed. Second, the cycle count plan schedules the process. Third, the work template ensures the specific count task is generated. Without these three elements working in tandem, the system will not trigger the automated generation of count work based on inventory thresholds or schedule-based triggers.

Answer

Warehouse location directive for 'Count'

Answer

Inventory status update to 'Counted'

Question 14

You need to restrict warehouse workers from picking from locations that are currently under maintenance. Which feature should you use to achieve this without deleting the locations?

Accepted Answer

Location profile. Location profiles allow you to toggle the 'Allow picking' parameter. By setting this to 'No' on the location profile associated with the locations under maintenance, you effectively prevent the system from suggesting these locations for picking. This is a non-destructive way to manage warehouse operations, allowing you to quickly react to maintenance needs while maintaining the integrity of your location records and warehouse layout configurations.

Answer

Location directive

Answer

Zone

Answer

Work template

Question 15

Refer to the exhibit. You are processing a wave, and the process fails with the provided error. What is the most likely reason the reservation failed?

Accepted Answer

The reservation hierarchy prevents reservation.. The reservation failure indicates that the system is unable to lock the requested quantity of inventory to the sales order during the wave process. This usually happens if the inventory is already reserved elsewhere, if the items are not available in the required location type, or if the inventory status does not allow for reservation. The wave fails because it cannot guarantee the stock required to fulfill the shipping order.

Answer

The wave template is missing the 'Replenishment' step.

Answer

The load template is not configured.

Answer

The warehouse worker is not assigned to the wave.