MB-330 Implement Warehouse and Transportation Management Practice Test 5 — 15 Questions

Question 1

When using the Transportation Management module, which process must be executed to determine the freight cost before shipping?

Accepted Answer

Rate and route. The 'Rate route workbench' or manual rating is used to run the transportation engine. This engine calculates the cost based on the carrier's rate master and route plans. This step is critical for accurate freight estimation and ensuring that the most cost-effective shipping method is selected for each customer order before the warehouse picks and packs the items.

Answer

Wave processing

Answer

Work release

Answer

Manifesting

Question 2

Which TWO of the following are benefits of using License Plate Tracking in Warehouse management? (Choose two)

Accepted Answer

Reduced scanning time for inventory moves.. License plate tracking enables granular inventory visibility and efficient movement of stock. By grouping multiple items into a single container/plate, you reduce the number of scans required by workers, thereby increasing speed. It also provides exact traceability of where an item is located within a storage location, which is crucial for high-density warehouse operations and inventory accuracy audits.

Answer

Automatic freight cost calculation.

Answer

Elimination of the need for wave templates.

Answer

Automatic generation of customer invoices.

Question 3

What is the primary function of a 'Location directive' in Dynamics 365 Supply Chain Management?

Accepted Answer

To determine the source or destination location for items.. Location directives are the core decision-making engine for inventory placement and picking. They determine where the system should suggest an item be put away or picked from. This allows businesses to enforce complex rules, such as zone preferences, volume restrictions, and unit of measure requirements, which are fundamental to maintaining an organized, efficient, and accurate warehouse environment.

Answer

To schedule warehouse worker shifts.

Answer

To define the steps for mobile device menu items.

Answer

To calculate the volume of a storage location.

Question 4

Which component is required to enable the 'Cluster picking' feature on a mobile device?

Accepted Answer

Cluster profile. Cluster picking requires a 'Cluster profile' to define how the cluster is built and managed. By setting this up, workers can pick multiple orders simultaneously into different 'positions' (totes) within a cluster. This is an essential strategy for high-volume picking environments where travel time is the primary bottleneck, allowing for dramatic increases in productivity by reducing the number of aisles traversed per picking shift.

Answer

Work pool

Answer

Location directive

Answer

Wave template

Question 5

Refer to the exhibit. A user reports that warehouse workers are unable to pick items even though inventory exists in the 'FLOOR' location profile. Based on the configuration in the exhibit, what is the most likely cause?

Accepted Answer

The 'AllowSplit' parameter prevents fulfilling the quantity.. The 'AllowSplit' parameter is set to false in the location directive action. If a pick requires a quantity that exceeds the inventory available in a single specific location, or if the system cannot fulfill the line in one transaction, the restriction prevents the system from splitting the work across multiple locations. Consequently, the work creation fails because the requirement cannot be met by a single allocation, causing the pick to remain blocked.

Answer

The warehouse query is incorrectly formatted.

Answer

The strategy 'FixedLocation' is not supported.

Answer

The LocationProfile 'FLOOR' is disabled.

Question 6

A warehouse manager wants to ensure that all items of a specific product category are moved to a specific zone upon receiving. Which setup should be used to achieve this automatically during the inbound process?

Accepted Answer

Location directive. Location directives are used to direct the put-away process. By configuring a location directive with a specific query that filters on the product category or item group, you can force the system to select locations belonging to a specific zone. This ensures that inventory is organized immediately upon receipt, optimizing the warehouse space and streamlining future picking processes for items that share similar handling or storage requirements.

Answer

Work template

Answer

Wave template

Answer

Storage dimension group

Question 7

You are configuring a cross-docking scenario where items arriving on a purchase order must be immediately moved to a shipping bay for a pending sales order. Which component must be enabled to facilitate this automatic flow?

Accepted Answer

Cross-docking template. Cross-docking is configured through the use of cross-docking templates. These templates allow you to define rules for when inventory should bypass storage and be moved directly to the shipping dock. By matching inbound demand (PO) with outbound demand (SO), the system creates the necessary cross-docking work, significantly reducing handling time and improving the speed of fulfillment for high-priority or backordered items that should not sit in warehouse storage.

Answer

Transportation management load builder

Answer

Wave demand replenishment template

Answer

Location directive for 'Pick'

Question 8

You are setting up license plate tracking in Microsoft Dynamics 365 Supply Chain Management. A warehouse manager wants to ensure that specific bulk storage locations can hold multiple license plates at the same time. Where should you configure this capability?

Accepted Answer

Location profiles. Location profiles determine the operational capabilities and physical constraints of warehouse locations, including whether license plate tracking is enforced and if multiple license plates are allowed. Configuring this parameter correctly prevents mixing inventory errors in non-mixed locations while allowing multi-pallet storage in bulk racks.

Answer

Warehouse management parameters

Answer

Warehouse zones

Answer

Location format

Question 9

Refer to the exhibit. You are troubleshooting a work template error in Dynamics 365. Why is this error occurring?

Accepted Answer

The work template is missing a required Pick-Put pair.. Work templates require a balanced structure consisting of pairs of Pick and Put operations to ensure the system can guide a worker through a complete transaction. Without a corresponding Put step for every Pick step, the system cannot finalize the work transaction. This requirement is fundamental to maintaining inventory integrity and ensuring that the system always knows the final destination of any inventory movement initiated by a work process.

Answer

The work template has too many steps.

Answer

The location directive is incorrectly configured.

Answer

The warehouse worker user ID is invalid.

Question 10

You are configuring a 'Cluster Picking' profile for a warehouse worker. Which configuration ensures that the worker can pick items for multiple orders simultaneously?

Accepted Answer

Set up a Cluster profile with defined positions.. Cluster picking requires a profile that defines the number of clusters (positions) and the sequence in which items are picked. By enabling cluster picking in the mobile device menu item and selecting a cluster profile, the worker can scan one item and distribute it across multiple orders. This dramatically improves throughput for high-volume, multi-order picking scenarios, reducing the number of trips a worker makes through the warehouse aisles.

Answer

Assign a work template with 'Split' enabled.

Answer

Enable wave picking in the mobile menu.

Answer

Create a new location directive for cluster.

Question 11

A warehouse manager wants to ensure that workers processing outbound shipments do not pick items in a sequence that causes congestion in narrow aisle locations. Which configuration should you implement to control the physical sorting and picking order of outbound work lines?

Accepted Answer

Set up directive code sorting rules and assign them to location directives to sequence work lines by location profile.. Directive code sorting rules allow you to define specific criteria, such as location sequence or inventory status, to determine the exact sequence in which work lines are presented to warehouse workers on mobile devices, effectively preventing aisle congestion during peak operations.

Answer

Configure location directive actions with customized sorting thresholds to sequence inventory by weight and volume.

Answer

Create a wave step method for replenishment that automatically recalculates line sequences based on current picker locations.

Answer

Modify the mobile device menu item settings to enable automatic line consolidation and priority sorting by item ID.

Question 12

A warehouse supervisor needs to enable a new mobile device menu item that allows workers to quickly move inventory from a receiving location to a staging location without creating a sales order or transfer order. The movement must be recorded in the system with a reason code for audit purposes. Which mobile device menu item type should you use?

Accepted Answer

Movement. The Movement menu item type is specifically designed for ad-hoc inventory transfers between locations without a source document. It captures the from and to locations, item, and quantity, and can enforce a reason code. This satisfies the need to move items from receiving to staging while maintaining an audit trail, unlike other menu item types that require documents or change quantities.

Answer

Indirect activity - Location movement

Answer

Sales order picking

Answer

Inventory adjustment

Question 13

A company uses Dynamics 365 Supply Chain Management Warehouse Management. They want to define a sequence of steps that a worker must follow on the mobile device when processing outbound picking, including scanning the item, confirming the quantity, and then scanning the license plate. Which component should they configure to achieve this?

Accepted Answer

Mobile device menu item. The mobile device menu item is the configuration element that defines the sequence of steps a worker performs on the handheld device. It specifies which fields are displayed, which scans are required, and in what order. By setting up a menu item for outbound picking with the appropriate work creation process and step configuration, the company can enforce scanning the item, then quantity, then license plate.

Answer

Wave template

Answer

Location directive

Answer

Work template

Question 14

You are configuring transportation management in Dynamics 365 Supply Chain Management. A load must be rated using a rate engine that considers both the distance and the weight of the items. You have set up a rate master with a rate base of 'Weight' and a rate base of 'Distance' as separate rate bases. However, when you rate the load, the system only applies the weight-based rate and ignores the distance. What is the most likely reason?

Accepted Answer

The rate master is configured with a rate flow that only includes the weight rate base.. Rate masters in transportation management use rate flows to determine which rate bases are applied and in what order. Even if multiple rate bases are assigned to a rate master, only those included in the rate flow are used during rating. To combine weight and distance, the rate flow must include both. The observed behavior of only weight being applied indicates that the rate flow is missing the distance rate base.

Answer

The rate base for distance is not assigned to the rate master.

Answer

The load's distance is not calculated because the shipping carrier's address is missing.

Answer

The distance rate base is not linked to the transportation management rate engine.

Question 15

A distribution center uses warehouse management in Dynamics 365 Supply Chain Management. The warehouse manager wants to create a new mobile device menu item that allows workers to perform a full or partial license plate receive against a purchase order. The worker must first scan the purchase order number, then the item, and then the license plate. Which mobile device menu item creation method should you use?

Accepted Answer

License plate receiving. The license plate receiving method is designed for scenarios where workers need to capture license plate information during receiving. It supports full or partial receiving against a purchase order and prompts for the purchase order, item, and license plate, matching the described workflow. Other receiving methods either lack license plate support or are intended for different receiving processes, such as load-based receiving.

Answer

Purchase order item receiving

Answer

Inbound load receiving

Answer

Purchase order line receiving