MB-330 Implement Warehouse and Transportation Management Practice Test 4 — 15 Questions

Question 1

You are setting up warehouse management in Dynamics 365 Supply Chain Management for a new warehouse that uses license plates to track inventory. You need to configure the system so that license plates are automatically generated when receiving purchase orders, and workers are required to scan them during putaway. Which two configurations should you perform? (Choose two.)

Choose an answer to begin — your selection is scored in the full session.

Accepted Answer

On the mobile device menu item for putaway, set the 'License plate' field to 'Mandatory'.. To automatically generate license plates during receiving, you must enable 'License plate generation' in warehouse management parameters and set up a number sequence for license plates. To require workers to scan license plates during putaway, you must set the 'License plate' field to 'Mandatory' on the putaway mobile device menu item. These two configurations together meet the requirements.

Answer

Configure the item's tracking dimension group to include 'License plate' as an active dimension.

Answer

Create a license plate label template and assign it to the warehouse's printer settings.

Answer

On the mobile device menu item for receiving, set the 'License plate' field to 'Mandatory'.

Question 2

A warehouse uses Dynamics 365 Supply Chain Management. The warehouse manager wants to ensure that when a worker picks an item, the system validates that the item is picked from the correct location and that the quantity matches the work order. Which mobile device menu item setting should be configured to enforce this validation?

Accepted Answer

Enable 'Location validation' and 'Item validation' on the menu item.. To enforce that the worker picks from the correct location and the correct item, you must enable location validation and item validation on the mobile device menu item. These settings prompt the worker to scan the location and item, and the system verifies them against the work order. Other settings like work confirmation or quantity validation do not provide this dual validation.

Answer

Set the 'Quantity validation' to 'Enforce'.

Answer

Set the 'Work confirmation' to 'Mandatory'.

Answer

Configure a location directive with 'Validation' strategy.

Question 3

A warehouse manager is configuring outbound wave processing in Dynamics 365 Supply Chain Management. The manager wants the system to automatically release work to the warehouse after a wave is processed, and to consolidate multiple shipments into a single load when they share the same route and carrier. Which two wave template settings should you configure to meet these requirements? (Choose two.)

Accepted Answer

Set the wave template's 'Automatically process wave' option to Yes.. To automatically release work after wave processing and consolidate shipments into loads by route and carrier, the wave template must have automatic load creation enabled and automatic wave processing enabled. These two settings cause the wave to build loads and generate and release work without manual steps. Other wave template options affect wave release timing or shipment creation and do not deliver the required behavior.

Answer

Set the wave template's 'Automatically release wave' option to Yes.

Answer

Set the wave template's 'Automatically create shipment' option to Yes.

Answer

Set the wave template's 'Automatically release work' option to Yes.

Question 4

You are configuring work policies for a warehouse. You need to ensure that when a worker picks an item, the system automatically suggests the nearest empty location for putaway after picking, and that the worker is not allowed to override the suggested location. Which two work policy settings must you configure? (Choose two.)

Accepted Answer

Disable the 'Allow users to override location' option in the work policy.. To ensure the system suggests the nearest empty location and prevents overriding, you need a location directive that sorts by distance to suggest the nearest location, and you must disable the 'Allow users to override location' option in the work policy. The location directive handles the suggestion logic, while the work policy setting enforces that the worker cannot change it. Enabling override would allow deviation, and other settings do not directly address the no-override requirement.

Answer

Enable the 'Allow users to override location' option in the work policy.

Answer

Set the 'Work order type' to 'Putaway' and enable 'Directed putaway'.

Answer

Set the 'Location directive' to use a query that sorts locations by distance.

Question 5

You are implementing warehouse management in Dynamics 365 Supply Chain Management. A warehouse manager wants to use the 'Load planning workbench' to plan and execute outbound loads. They need to ensure that when a load is released to the warehouse, the system automatically creates picking work and that the work is assigned to the appropriate workers based on their skills. What should you configure to achieve this?

Accepted Answer

Configure a work template with a work pool that is linked to a work pool assignment rule based on worker skills.. To automatically assign picking work to workers based on skills, you configure a work template with a work pool. The work pool is then linked to a work pool assignment rule that evaluates worker skills. When the load is released, the work is created and placed in the work pool. The assignment rule then routes the work to workers whose skills match the criteria. This ensures that work is directed to qualified workers without manual intervention.

Answer

Set up a work class and assign it to the load, then configure a work template with the work class.

Answer

Configure the mobile device menu item to prompt for worker skill, and then use that to filter work.

Answer

Set up a location directive with a query that filters workers by skill, and assign it to the work template.

Question 6

You are implementing warehouse management in Dynamics 365 Supply Chain Management. The warehouse uses license plate (LP) tracking for all items. You need to ensure that when a worker receives a purchase order on a mobile device, the system automatically generates a new license plate for each receipt line and associates it with the received quantity. Which mobile device menu item configuration should you use?

Accepted Answer

Create a mobile device menu item for 'License plate receiving' and configure the work template to create a new LP for each receipt line.. License plate receiving is the correct mobile device menu item when automatic LP generation is needed during purchase order receipt. It allows the system to create a new LP for each receipt line and associate the received quantity with that LP, ensuring accurate tracking. Other receiving menu items either do not support LP generation or require manual LP entry.

Answer

Create a mobile device menu item for 'Purchase order item receiving' and set the 'License plate' field to 'Mandatory'.

Answer

Create a mobile device menu item for 'Purchase order line receiving' and set the 'Generate license plate' option to 'Yes'.

Answer

Create a mobile device menu item for 'Movement' and configure it to generate a new LP upon completion of the movement.

Question 7

A company is implementing Warehouse Management in Dynamics 365 Supply Chain Management. The warehouse supervisor wants to use a mobile device to register the receipt of a purchase order and immediately create putaway work. Which mobile device menu item type should the supervisor use for this receipt process?

Accepted Answer

Purchase order item receiving. The mobile device menu item type 'Purchase order item receiving' allows a worker to receive purchase order lines on a mobile device. When warehouse management is enabled, the receipt generates putaway work automatically. Other menu item types either do not exist, handle loads rather than purchase orders, or perform internal movements, so they do not meet the requirement.

Answer

Inbound load receiving

Answer

Inventory movement

Answer

Purchase order line receiving and putaway

Question 8

You are configuring warehouse work policies for a distribution center. The warehouse manager wants to ensure that when a sales order is released to the warehouse, the system creates picking work that combines multiple order lines for the same item into a single pick, even if they belong to different orders. Which work policy should you configure?

Accepted Answer

Create a work template with a 'Pick' work type and set the 'Group by' field to 'Item'.. The work template's 'Group by' field is used to consolidate work lines. When set to 'Item', the system groups all pick lines for the same item, regardless of the originating order, into a single pick work line. This reduces the number of picks and travel time. Other options like batch picking or work policies do not provide this specific grouping at the work creation level.

Answer

Modify the location directive to allow picking from multiple orders in a single location.

Answer

Configure the 'Work policy' to 'Consolidate picks' and set the 'Consolidation' option to 'Order'.

Answer

Set the 'Work order type' to 'Sales order' and enable 'Batch picking' in the work template.

Question 9

You are setting up transportation management in Dynamics 365 Supply Chain Management. The company needs to rate shipments using a third-party carrier's API to get real-time rates. You must configure the system to use an external rating engine. Which two actions must you perform? (Choose two.)

Accepted Answer

Create a rate engine with a rate base of 'External' and specify the external service endpoint.. To integrate an external rating engine, you must create a rate engine with the rate base set to 'External' and configure the external rating connector with the appropriate endpoint and data mapping. These two actions enable the system to call the third-party API and process the returned rates. Other options like rate route workbench or shipping carrier interfaces are not required for this purpose.

Answer

Create a shipping carrier interface and assign it to the external rating engine.

Answer

Define a rate master with a mileage-based rate and set the 'Use external rating' flag to 'Yes'.

Answer

Configure a rate route workbench to compare external rates with internal rates.

Question 10

You are configuring warehouse locations for a new warehouse. The warehouse manager wants to ensure that when a worker performs a put-away, the system suggests a location based on the item's dimensions and the available space in the location. Which location directive strategy should you use?

Accepted Answer

Location directive with a strategy of 'Capacity' and a query that includes the item's dimensions.. The 'Capacity' strategy in location directives uses the item's dimensions and the location's capacity settings to suggest a suitable location. It checks both volume and weight constraints. This ensures that the put-away location has sufficient space. Other strategies like 'Consolidate' or 'Volume' do not fully address the need to consider both dimensions and available space.

Answer

Location directive with a query that filters locations by item's storage dimension group and the 'Available capacity' field.

Answer

Location directive with a strategy of 'Consolidate' and a query that includes the item's dimensions.

Answer

Location directive with a strategy of 'Volume' and a query that includes the item's dimensions.

Question 11

Refer to the exhibit. You have configured a Wave template as shown. Despite this, sales orders are not being processed into waves automatically. What is the most likely cause?

Accepted Answer

The Wave template query is not filtering for the correct orders.. The exhibit shows the automation flags are set to true, which is correct. However, the system relies on a 'Wave template query' to associate specific orders with this template. If the query criteria are too restrictive or undefined, no orders will match, preventing the template from triggering. This issue highlights the importance of matching business criteria with the underlying query logic for successful automation.

Answer

The Wave template is missing a required Ship method.

Answer

The TemplateStatus is set to Active instead of Draft.

Answer

The WaveMethod is incorrectly set to Pick.

Question 12

You are implementing a warehouse with multiple picking locations. You need to ensure that workers are directed to the shortest path when picking items. Which configuration should you update?

Accepted Answer

Configure Location sorting on the Location profile.. Location sorting is the key mechanism for optimizing pathing. By configuring the 'Location profile' and 'Location sorting' settings, you dictate the physical sequence in which the system directs workers. This is essential for improving warehouse productivity, as it minimizes non-value-added travel time and increases the number of lines picked per hour, directly impacting labor costs and operational efficiency.

Answer

Update the Work template sequence.

Answer

Enable 'Zone picking' on the Warehouse setup.

Answer

Modify the Mobile device menu item to 'User directed'.

Question 13

Which entity in the Transportation Management module is responsible for calculating freight costs based on carrier services?

Accepted Answer

Rate master. The 'Rating profile' or 'Rate master' is used to define the rules for freight cost calculation. By associating these with a shipping carrier, the system can automatically calculate transport costs based on weight, volume, or distance. This is crucial for accurate landed cost accounting and for comparing shipping rates across different carriers to minimize logistics expenses.

Answer

Freight bill

Answer

Route plan

Answer

Carrier manifest

Question 14

A warehouse manager needs to ensure that high-value items are always moved to a secure cage location during put-away. How should this be implemented?

Accepted Answer

Use a Directive code in the Work template and Location directive.. Using 'Directive codes' is the standard way to link a specific work template operation to a particular location directive. By assigning a unique directive code to the put-away work step and referencing it in the location directive query, you ensure the system specifically targets the secure cage. This provides the necessary inventory control required for high-value goods in a busy warehouse environment.

Answer

Modify the Work template to include a fixed location.

Answer

Set the item to 'Fixed location' in the Warehouse setup.

Answer

Configure a Wave template to filter by item value.

Question 15

Refer to the exhibit. The system fails to create work. Based on the error, what is the most likely reason?

Accepted Answer

The Location directive query is too restrictive.. This error signifies that the Location directive query failed to find any matching locations. Without a strategy or valid location, the system cannot complete the transaction. This is a common implementation hurdle where the directive criteria are too restrictive or the warehouse layout hasn't been properly mapped to the location directive's requirements, preventing stock movement.

Answer

The Work template status is set to Draft.

Answer

The Mobile device menu item is incorrectly configured.

Answer

The Wave template is missing an automated release step.