MB-330 Practice Test 11 — 15 Questions

Question 1

You are a functional consultant for a company that uses Dynamics 365 Supply Chain Management. The warehouse manager wants to set up a new inventory counting process for high-value items. They require that counting be performed on a periodic basis without stopping warehouse operations, and that the system automatically generates counting work based on a schedule. Which feature should you configure?

Choose an answer to begin — your selection is scored in the full session.

Accepted Answer

Cycle counting plan. Cycle counting plans enable periodic counting of items without stopping warehouse operations. They automatically generate counting work based on defined schedules and scopes, making them ideal for high-value items. Other options like inventory blocking or journals do not provide automated scheduling or work generation.

Answer

Inventory journal

Answer

ABC classification

Answer

Inventory blocking

Question 2

A supply chain manager needs to run Master Planning for a specific item and wants the planning engine to consider only the demand and supply for that item, ignoring all other items. Which action should the manager take when starting the planning run?

Accepted Answer

Set the 'Item number' filter on the Master Planning run dialog.. The Master Planning run dialog provides an 'Item number' filter that scopes the planning calculation to the specified item. Using this filter, the manager can run planning for a single item without affecting or processing other items. This is the standard way to isolate a planning run for troubleshooting or targeted replenishment.

Answer

Set the 'Planning optimization' toggle to 'Single item'.

Answer

Disable the 'Include all items' checkbox on the master plan.

Answer

Create a new master plan with a coverage group limited to the item.

Question 3

A company uses Microsoft Dynamics 365 Supply Chain Management with the Warehouse Management module. They are implementing a new process for handling returns. They need to configure the system so that when a return order is created, the system automatically creates put-away work for the returned items to a designated returns location. Which two configurations are required to achieve this? (Choose two.)

Accepted Answer

Set up a location directive for the work order type 'Return order' with an action to put away to the returns location.. To automatically create put-away work for return orders, you need a work template for the 'Return order' work order type that includes a put step, and a location directive for the same work order type that directs items to the returns location. These two configurations enable the system to generate and direct put-away work when a return order is processed.

Answer

Enable the 'Automatic return order processing' parameter in the warehouse management parameters.

Answer

Set up a wave template for returns that includes a put-away step.

Answer

Configure a reservation hierarchy that includes the returns location as the first dimension.

Question 4

A manufacturer runs Master Planning for a product that is purchased from a vendor with a confirmed lead time of 14 days. The planning run currently generates planned purchase orders with a lead time of 7 days, causing material shortages. Which item coverage setting must be reviewed and corrected to align the planning run with the vendor's actual lead time?

Accepted Answer

Lead time = 14 in the Default order settings. Master Planning back-schedules planned purchase orders using the purchase lead time defined on the item's Default order settings. Because the vendor requires 14 days but the item is configured with 7, every planned order is created too late. Correcting the lead time to 14 days makes the planning engine place order dates correctly and eliminates the material shortages.

Answer

Coverage time fence = 14

Answer

Safety stock = 14

Answer

Coverage code = Min/Max

Question 5

A distribution company needs Master Planning to generate planned transfer orders that replenish a warehouse from a central distribution center. The item is currently set up with a coverage code of 'Min/Max' and a default order type of 'Purchase'. What must be configured to allow the planning run to create planned transfer orders instead of planned purchase orders?

Accepted Answer

Set the item's default order type to 'Transfer' on the Default order settings.. Master Planning decides the type of planned order to create based on the item's default order type on the Default order settings. With 'Purchase' selected, replenishment is always proposed as planned purchase orders. Switching the default order type to 'Transfer' makes the planning engine generate planned transfer orders, which is the required behavior for warehouse-to-warehouse replenishment.

Answer

Assign the item to a warehouse that is configured as a transit warehouse.

Answer

Set the item's 'Transfer lead time' to a positive value.

Answer

Create a new coverage group with a 'Transfer' coverage code.

Question 6

A company is defining a new category hierarchy for its electronics products in Dynamics 365 Supply Chain Management. The product team wants to use the hierarchy both to organize products and to control which product attributes are available for products in each category. Which two statements describe how category hierarchies and attribute assignments work in this scenario? (Choose two.)

Accepted Answer

Product attributes can be assigned to a category so that products placed in that category can use those attributes.. Category hierarchies carry a type that defines their purpose, and attributes assigned to a category become available to products placed in that category. These two behaviors let the company organize electronics products and control which attributes apply. Attribute values inherited from a category are defaults that products can override, dimension groups are unrelated, and multiple hierarchies of the same type can coexist without covering all products.

Answer

Only one category hierarchy of each type can exist at a time, and it must contain every product in the legal entity.

Answer

Attribute values entered on a category are automatically copied to every product assigned to that category and cannot be changed per product.

Answer

A category hierarchy must be linked to a product dimension group before attributes can be assigned to its categories.

Question 7

You are implementing transportation management in Dynamics 365 Supply Chain Management. A logistics coordinator needs to rate shipments using an external rating engine that returns the freight cost based on distance and weight. The rating engine exposes a REST API that accepts JSON and returns JSON. You need to configure the system to call this API during the rating process and store the returned cost on the load. What should you do?

Accepted Answer

Create a rate route master with a rate engine of type 'Microsoft.Dynamics.Ax.Tms.Bll.CustomRateEngine' and specify the assembly and class that implements the external API call.. To integrate an external rating engine, you use the CustomRateEngine. This engine type allows you to specify a custom assembly and class that implements the rating logic. Your custom class can call the external REST API, process the JSON response, and return the freight cost. The system then stores this cost on the load during the rating process. This is the standard extensibility approach for custom rating.

Answer

Create a rate route master with a rate engine of type 'Microsoft.Dynamics.Ax.Tms.Bll.MileageRateEngine' and configure the mileage parameters.

Answer

Configure a transportation management rate base and rate base assignment to use the 'External' rate engine, then define the API endpoint in the Transportation management parameters.

Answer

Set up a transit time engine to call the external API and return the cost, then assign it to the rate route master.

Question 8

A company is defining a new released product and wants the item to be excluded from inventory valuation postings because it is always expensed at purchase. Which configuration on the released product determines whether inventory transactions are posted to the general ledger?

Accepted Answer

Item model group with 'Stocked product' cleared, which excludes the item from inventory valuation postings.. The Stocked product setting on the item model group is the switch that determines whether an item participates in inventory valuation. Clearing it makes receipts and issues behave as expenses rather than inventory movements, which matches the company's intent to expense the item at purchase. Other settings control dimension tracking or physical availability, not valuation posting behavior.

Answer

Item model group with 'Stocked product' cleared and 'Physical negative inventory' disabled.

Answer

Storage dimension group with 'Financial inventory' cleared for Site and Warehouse.

Answer

Product type set to 'Service' on the product's default order settings.

Question 9

You are configuring warehouse management in Dynamics 365 Supply Chain Management. A warehouse manager wants to use wave templates to automate the release of sales order lines to the warehouse. The wave template must automatically create picking work for items that are in stock and allocate them to the best locations. Which two settings must you configure on the wave template to achieve this? (Choose two.)

Accepted Answer

Add a 'Create work' wave step to the wave template.. To automatically create picking work for sales order lines, the wave template must include both an 'Allocate' step and a 'Create work' step. The Allocate step reserves inventory based on location directives, ensuring that stock is available. The Create work step then generates the picking work using the work template and location directives. Other settings like wave template type or default assignment are supportive but not sufficient on their own.

Answer

Set the 'Wave template' to 'Default' for the warehouse.

Answer

Set the 'Wave template type' to 'Shipping'.

Answer

Set the 'Automatically create wave' option to 'Yes'.

Question 10

A manufacturer uses Dynamics 365 Supply Chain Management. They need to track the cost of a raw material that fluctuates daily. The material is stored in a single warehouse but issued to production at standard cost. They want to update the standard cost periodically without manual journal entries. Which cost accounting approach should they use?

Accepted Answer

Standard cost with cost roll-up and periodic revaluation. Standard cost with cost roll-up and periodic revaluation is designed for environments where items are issued at a fixed standard cost. The roll-up recalculates the standard based on current component costs, and revaluation adjusts inventory and variances without manual journals. This matches the need to update standards periodically while maintaining stable production costing.

Answer

Moving average

Answer

LIFO

Answer

FIFO

Question 11

A third-party logistics provider uses Dynamics 365 Supply Chain Management Warehouse Management. During peak season, the company must ship partial loads to the same destination using multiple carriers, and each carrier load must be rated and tendered independently. The transportation manager wants the system to automatically group shipments by carrier service and route so loads can be planned without manual selection. Which transportation management feature should you configure to meet this requirement?

Accepted Answer

Load building workbench with a load template that groups by carrier service and route.. Automatic grouping of shipments into carrier-specific loads is achieved with the load building workbench and load templates. Load templates define grouping criteria such as carrier service and route, so a single planning run can produce multiple loads that are rated and tendered independently. Rate route workbench, freight bill posting, and warehouse work policies address different stages and cannot perform this load grouping.

Answer

Rate route workbench with a rate shop that compares all carriers for the destination.

Answer

Transportation management engine with a freight bill posting policy for each carrier.

Answer

Warehouse work policy with a location directive scoped to the outbound dock.

Question 12

A company uses Dynamics 365 Supply Chain Management. They have a master plan that is configured to use 'Forecast' as a demand type. They have a sales forecast for 100 units in January. However, they receive a firm sales order for 80 units in January. How does Master Planning handle the forecast and the sales order to avoid double-counting demand?

Accepted Answer

It reduces the forecast by 80 units, leaving a forecast of 20 units, and includes the sales order for 80 units.. Master Planning uses forecast reduction to prevent double-counting when both forecast and firm sales orders exist. The sales order quantity is subtracted from the forecast, and the remaining forecast is planned. In this scenario, the 80-unit sales order reduces the 100-unit forecast to 20 units, resulting in total demand of 100 units. This method ensures accurate replenishment without over-ordering.

Answer

It ignores the forecast entirely and plans only for the sales order for 80 units.

Answer

It creates a planned order for 100 units based on the forecast and ignores the sales order.

Answer

It adds the forecast and the sales order, resulting in total demand of 180 units.

Question 13

A company uses Dynamics 365 Supply Chain Management Asset Management. Maintenance workers must record the spare parts they consume on work orders, and the parts must be financially posted against the correct asset. You need to configure the system so that item consumption on a work order creates the appropriate inventory and ledger transactions. Which setup should you perform?

Accepted Answer

Configure an inventory journal name and select it on the Asset Management parameters for item consumption.. Asset Management item consumption is driven by an inventory journal whose name is set in Asset Management parameters. When workers add spare parts to a work order and post the consumption, the system creates inventory issue transactions and posts costs to the asset, meeting the financial posting requirement. Other setups address procurement, project accounting, or general inventory posting, not work order consumption.

Answer

Create a project category for the spare parts and link it to the work order type.

Answer

Enable the 'Asset management' option on the item model group and assign a posting profile.

Answer

Create a purchase agreement for the spare parts and reference it on the work order.

Question 14

A company needs to create a new product that will have variants based on color and size. The product will be sold in multiple legal entities. The product team wants to define the variants once and release them to all legal entities. Which approach should they use?

Accepted Answer

Create a product master with a product dimension group that includes Color and Size, then release it to all legal entities.. A product master with a product dimension group containing Color and Size is the correct way to define variants once and release them to multiple legal entities. The product master holds the shared definition, and releasing it creates released product variants in each legal entity. This ensures consistency and reduces maintenance compared to creating distinct products or copying data.

Answer

Create a product master with a storage dimension group that includes Color and Size, then release it to all legal entities.

Answer

Create a distinct product for each color and size combination in each legal entity.

Answer

Create a released product in one legal entity and copy it to other legal entities using the data management framework.

Question 15

A company is configuring a new product master for a configurable item. They need to define which product dimensions will be used for variants and ensure that the dimensions are available for planning and costing. Which two actions must be performed? (Choose two.)

Accepted Answer

Create a product dimension group that includes the required dimensions and assign it to the product master.. To use product dimensions for variants and ensure they are available for planning and costing, two actions are required: assign a product dimension group that includes the desired dimensions to the product master, and define the specific dimension values for each included dimension. These steps enable variant creation and allow planning and costing to differentiate by dimension. Storage and tracking dimension groups serve different purposes and do not fulfill this requirement.

Answer

Set the 'Storage dimension group' to include the same dimensions as the product dimension group.

Answer

Enable the 'Variant' generation option in the Inventory and warehouse management parameters.

Answer

Create a tracking dimension group that includes 'Batch' and 'Serial' for the product master.