20+ practice questions focused on Infrastructure — one of the most tested topics on the ENCOR 350-401 exam. Each question includes a detailed explanation so you learn why the right answer is correct.
Start Infrastructure PracticeA network engineer is troubleshooting an EIGRP adjacency issue between two routers. The engineer verifies that both routers have the same K-values and autonomous system number. However, the adjacency does not form. Which configuration issue is most likely the cause?
Explanation: In EIGRP, authentication (MD5 or SHA) must be configured identically on both peers. If one router has authentication enabled and the other does not, the routers will reject each other's hello packets, preventing adjacency formation even if K-values and AS numbers match. This is a common misconfiguration that breaks neighbor relationships silently.
A company is implementing QoS in a campus network. Voice traffic must be prioritized over data traffic, and all traffic should be marked at Layer 2 and Layer 3. Which combination of marking values should be used on access ports to achieve this?
Explanation: Option C is correct because voice traffic requires strict priority queuing, which is achieved by marking with CoS 5 at Layer 2 and DSCP EF (46) at Layer 3. CoS 5 maps to the priority queue in Cisco switches, and DSCP EF is the standard per-hop behavior for Expedited Forwarding (RFC 3246), ensuring low latency and jitter for voice. Access ports must trust these markings to prioritize voice over data traffic.
An engineer needs to configure a switchport to carry traffic for multiple VLANs to a router using a single physical link. Which configuration should be applied on the switchport?
Explanation: Option B is correct because a trunk port is specifically designed to carry traffic for multiple VLANs over a single physical link using IEEE 802.1Q encapsulation. This allows the switch to tag frames with VLAN IDs, enabling the router (often configured as a router-on-a-stick) to route between VLANs.
A network engineer is deploying a new WLAN and needs to ensure that client traffic is encrypted using AES with a pre-shared key. Which security configuration should be applied to the wireless SSID?
Explanation: WPA2-PSK with AES is the correct choice because the requirement specifies AES encryption with a pre-shared key. WPA2-PSK (Wi-Fi Protected Access 2 – Pre-Shared Key) mandates AES-CCMP (Counter Mode Cipher Block Chaining Message Authentication Code Protocol) as the encryption protocol, providing strong, standards-compliant security for client traffic. This configuration directly satisfies the need for both AES encryption and PSK authentication.
A network administrator is troubleshooting an issue where OSPF routes are not being learned from a neighbor. The administrator checks the OSPF configuration and sees that both routers are in the same area. The neighbor state is stuck in EXSTART. What is the most likely cause?
Explanation: When OSPF neighbors are stuck in the EXSTART state, it typically indicates a problem with the Database Description (DBD) packet exchange process. The most common cause is an MTU mismatch between the interfaces, because OSPF will not proceed to the Exchange state if the DBD packet is larger than the interface MTU and gets silently dropped. This prevents the routers from agreeing on the master/slave relationship and exchanging link-state information.
+15 more Infrastructure questions available
Practice all Infrastructure questions1. Baseline your knowledge
Start with 10 questions to gauge your current understanding of Infrastructure. This tells you whether you need a concept refresher or just practice.
2. Review every explanation
For each question — right or wrong — read the full explanation. Understanding why an answer is correct is more valuable than knowing the answer itself.
3. Focus on exam traps
Infrastructure questions on the 350-401 frequently use trap wording. Look for subtle differences in answers that test your precision, not just general knowledge.
4. Reach 80% consistently
Do repeated sessions until you score 80%+ three times in a row. Then move to mixed-mode practice to test cross-topic recall under realistic conditions.
The exact number varies per candidate. Infrastructure is tested as part of the ENCOR 350-401 blueprint. Practicing with targeted Infrastructure questions ensures you can handle any format or difficulty that appears.
Yes. Courseiva provides free 350-401 practice questions across all exam topics and domains. The platform includes topic-based practice, mock exams, missed-question review, bookmarked questions, and readiness tracking — no account required.
Difficulty is subjective, but Infrastructure is a high-priority exam concept tested in multiple ways — direct recall, scenario analysis, and command-output interpretation. Consistent practice is the best way to build confidence.
Launch a full Infrastructure practice session with instant scoring and detailed explanations.
Start Infrastructure Practice →