A concise reference covering every 300-410 exam domain — blueprint weights, must-know concepts, common exam traps, and quick-answer summaries. Use this to review the day before your exam or to build your study roadmap.
You must configure and troubleshoot OSPF, EIGRP, BGP, redistribution, and PBR from CLI show output. The single most important thing is verifying the exact match or adjacency condition before changing policy, because one wrong sequence number or K-value breaks the whole path.
35%
Key concepts
✓OSPFv3 and OSPFv2 adjacency, area types, virtual links, and passive-interface behavior
✓EIGRP named mode configuration, K-values, variance, and feasible successor selection
✓BGP path selection, route maps, communities, local preference, and AS-path filtering
✓Route redistribution, PBR with route-map and set ip next-hop, and VRF-aware routing
Watch out for
⚠Mixing EIGRP classic and named mode commands, or mismatching K-values, which silently blocks adjacency formation
⚠Forgetting that route-map match statements are ANDed and that a missing permit sequence drops all unmatched routes
⚠Assuming PBR overrides the routing table without checking that the route-map is applied to the correct interface and direction
200.0VPN Technologies
Be able to configure and verify IPsec, DMVPN, FlexVPN, and GET VPN on Cisco routers, and to isolate whether a tunnel failure is Phase 1 or Phase 2. The most important thing: confirm both peers agree on every IKE and IPsec parameter, including identity and proxy ACLs.
20%
Key concepts
✓IKEv1/IKEv2 Phase 1 and Phase 2 parameter matching: encryption, hashing, DH group, lifetime, and pre-shared key or certificate authentication
✓IPsec crypto map, IPsec profile, and transform set configuration, including ACL or VTI-based interesting traffic selection
✓DMVPN Phase 1/2/3 with NHRP, mGRE, and tunnel protection, plus FlexVPN hub-and-spoke IKEv2 authorization
✓GET VPN group member and key server roles, including key distribution and the GDOI protocol
Watch out for
⚠Mismatched Phase 2 transform sets, proxy ACLs, or PFS settings between peers, which lets Phase 1 complete but makes Phase 2 fail with QM FSM errors.
⚠Assuming a single IKEv2 or IPsec profile can serve all spokes without matching authentication, authorization, or local/remote identity settings per peer.
⚠Confusing GET VPN key distribution with IKE: GDOI uses the key server, not standard IPsec IKE, to push encryption keys to group members.
300.0Infrastructure Security
Configure and verify AAA with TACACS+ or RADIUS and local fallback, OSPF/EIGRP neighbor authentication, and CoPP policies on Cisco IOS. The critical skill is reading show command output to confirm which authentication method or policy actually applied to the traffic.
20%
Key concepts
✓AAA authentication, authorization, and accounting using TACACS+ and RADIUS with local fallback
✓OSPFv2 and OSPFv3 neighbor authentication using MD5 or SHA key chains
✓Control Plane Policing and control-plane protection for router CPU-bound traffic
✓IPv6 first-hop security and uRPF anti-spoofing features on Cisco IOS
Watch out for
⚠Assuming 'aaa authentication login default group tacacs+ local' falls back to local when the TACACS+ server is reachable but rejects the user; fallback only occurs on server unavailability.
⚠Configuring OSPF MD5 authentication on an interface without matching authentication on the neighbor, or forgetting that authentication must be enabled in the OSPF area or interface.
⚠Building CoPP policy-maps with wrong match criteria or applying them to the wrong control-plane interface, so policing never affects the intended traffic.
400.0Infrastructure Services
Be able to select and apply the exact IOS commands that enable DMVPN Phase 3 spoke-to-spoke forwarding, IPv6 First Hop Security filtering, and TACACS+ AAA with fallback. The single most important thing is knowing which command goes on the hub versus the spoke.
25%
Key concepts
✓DMVPN Phase 3 hub commands: ip nhrp redirect and ip nhrp shortcut for spoke-to-spoke tunnels
✓IPv6 First Hop Security features including DHCPv6 Guard, RA Guard, and IPv6 snooping
✓TACACS+ authentication, authorization, and accounting configuration with fallback behavior
✓Verification and troubleshooting of NHRP mappings, DHCPv6 Guard policy, and AAA server reachability
Watch out for
⚠Assuming ip nhrp redirect alone enables spoke-to-spoke tunnels; the spoke also needs ip nhrp shortcut and a route to the destination spoke.
⚠Confusing DHCPv6 Guard with RA Guard; DHCPv6 Guard filters DHCPv6 server and client messages, not router advertisements.
⚠Forgetting that TACACS+ fallback requires configuring the aaa authentication command with a local or none fallback method after the server group.
Exam Day Reminders
→Read every question stem fully — look for qualifiers like 'MOST likely,' 'BEST,' or 'EXCEPT.'
→Flag uncertain questions and come back — don't waste time on one question.
→Eliminate obviously wrong options first, then choose between remaining ones.
→Trust your first instinct unless you have a specific reason to change.
→For 300-410, scenarios typically have one clearly best answer — look for the option that matches the specific constraints in the question.