CEH Footprinting, Reconnaissance and Scanning — Timed 50 Questions

Question 1

A security analyst runs the following Nmap command: nmap -sS -sV -O -p 22,80,443,3389 192.168.1.0/24. Which of the following BEST describes what this scan will accomplish?

Accepted Answer

Perform a TCP SYN scan on four ports, detect service versions, and attempt OS fingerprinting. Option B is correct because the `-sS` flag initiates a TCP SYN stealth scan, `-sV` enables service version detection, and `-O` attempts OS fingerprinting. The `-p 22,80,443,3389` limits the scan to those four ports, and the target `192.168.1.0/24` scans the entire Class C subnet. This combination performs a half-open scan on the specified ports, probes for application versions, and tries to identify the operating system of each live host.

Answer

Perform a full TCP connect scan with UDP service detection on all ports

Answer

Perform an aggressive scan of all open ports and enumerate SMB shares

Answer

Perform a UDP scan on the four specified ports and identify running services

Question 2

During a passive reconnaissance phase, a penetration tester uses a tool to gather email addresses, subdomains, and employee names associated with a target domain without directly interacting with the target's systems. Which tool is BEST suited for this purpose?

Accepted Answer

theHarvester. theHarvester is specifically designed for passive reconnaissance by querying public sources such as search engines (Google, Bing), PGP key servers, and the Shodan API to collect email addresses, subdomains, and employee names without sending any packets directly to the target's infrastructure. This aligns perfectly with the requirement of gathering OSINT data without direct interaction.

Answer

Nmap

Answer

Netcat

Answer

Wireshark

Question 3

A security analyst notices unusual outbound traffic from an internal server to a known malicious IP address on port 4444. The server is running a web application that was recently scanned using a vulnerability scanner. Which of the following is the MOST likely cause?

Accepted Answer

A vulnerability discovered during the scan was exploited, establishing a reverse shell connection to the attacker. Option C is correct because outbound traffic on port 4444 from an internal server to a known malicious IP is a classic indicator of a reverse shell connection. A reverse shell is a common post-exploitation technique where an attacker forces the victim server to connect back to their listener, often on high ports like 4444, bypassing inbound firewall rules. The timing after a vulnerability scan strongly suggests that a discovered vulnerability (e.g., command injection, RCE) was exploited to establish this shell.

Answer

The server is performing a DNS lookup to resolve the malicious IP address

Answer

The web application is sending log data to a SIEM system for analysis

Answer

The vulnerability scan caused a false positive and triggered a legitimate backup process

Question 4

During a penetration test, you execute the following command: dnsrecon -d example.com -t axfr. The output shows 'AXFR record received' followed by a list of all DNS records. What does this indicate about the target's DNS configuration?

Accepted Answer

The DNS server is vulnerable to zone transfer attacks, allowing unauthorized users to retrieve the entire zone file. The successful execution of `dnsrecon -d example.com -t axfr` and the receipt of an AXFR (full zone transfer) response indicates that the target DNS server is misconfigured to allow zone transfers from any host. A properly secured DNS server should restrict AXFR queries to only authorized secondary (slave) servers, typically by IP address or TSIG (Transaction Signature) keys. Since the command was run from an unauthorized client, this confirms a zone transfer vulnerability, allowing an attacker to retrieve the entire DNS zone file, which reveals all hostnames, IP addresses, and service records.

Answer

The DNS server is using DNSSEC to secure zone transfers

Answer

The DNS server is properly configured and only allows zone transfers to authorized secondary servers

Answer

The target uses a split-DNS configuration with internal and external views

Question 5

Which Google dork would a penetration tester use to find login pages of websites that have 'admin' in the URL?

Accepted Answer

inurl:"admin" inurl:"login". Option D is correct because the Google dork `inurl:"admin" inurl:"login"` specifically searches for pages where both 'admin' and 'login' appear in the URL. This is a precise way to find login pages on administrative interfaces, as it targets URLs containing both terms, which is a common pattern for admin login portals.

Answer

site:admin login

Answer

filetype:pdf admin login

Answer

intitle:"login" inurl:admin

Question 6

A security team wants to identify all live hosts on a large, Class B private IP network (172.16.0.0/16) as quickly as possible while minimizing network load. Which tool and technique should they use?

Accepted Answer

Masscan with --ping to send ICMP echo requests across the /16 range. Masscan is designed for high-speed scanning and can send ICMP echo requests across a /16 range (65,536 IPs) in seconds, far faster than Nmap or hping3, while its --ping mode minimizes network load by using stateless packet transmission. This makes it the optimal choice for quickly identifying live hosts on a large private network without overwhelming the network.

Answer

Use theHarvester to query DNS records for the domain

Answer

Nmap with -sn (ping sweep) on all 65536 IPs

Answer

hping3 with --icmp on each IP sequentially

Question 7

During a penetration test, you run the following Nmap command: nmap -sS -sV -O -A -T4 --script=default 10.0.0.1. The scan results show that port 443 is open and the service is 'Apache httpd 2.4.29'. However, banner grabbing with Netcat shows 'Apache/2.4.41 (Ubuntu)'. What is the MOST likely explanation for the discrepancy?

Accepted Answer

Netcat banner grabbing is more reliable because it reads the actual server response. Option B is correct because Netcat performs a direct TCP connection to the service and reads the raw banner as sent by the application, which is the most immediate and unfiltered version information. Nmap's version detection (-sV) relies on probe-response matching against its signature database, which can be outdated or misinterpret the service if the server uses banner obfuscation or if the Nmap database does not have an exact match for the newer version. In this case, Netcat reveals the actual server version (2.4.41), while Nmap's database may only have a signature for 2.4.29, leading to a false lower version.

Answer

The server is using a reverse proxy that presents a different version to Nmap

Answer

The discrepancy is due to Nmap's OS fingerprinting conflicting with version detection

Answer

Nmap is more accurate because it uses deep packet inspection

Question 8

A security analyst is conducting a vulnerability scan on a web server using Nessus. After the scan, they notice that the server's performance has degraded significantly, and some services have become unresponsive. Which of the following actions could have prevented this issue?

Accepted Answer

Configure Nessus to use a 'safe' scan policy that disables disruptive plugins. Option B is correct because Nessus 'safe' scan policies disable plugins known to cause service disruption, such as those performing denial-of-service tests or exploiting vulnerabilities that may crash services. By using a safe policy, the analyst avoids aggressive checks that can degrade server performance or cause unresponsiveness, which is a common risk during vulnerability scanning.

Answer

Increase the scan intensity to complete faster and reduce the load

Answer

Use a different scanner like OpenVAS which is less intrusive

Answer

Run the scan during peak hours to blend in with normal traffic

Question 9

During a security assessment, a tester uses Maltego to gather information about a target organization. Which type of reconnaissance is being performed?

Accepted Answer

Passive reconnaissance. Maltego is a tool that collects publicly available information from sources like DNS records, WHOIS databases, and social media without directly interacting with the target's systems. This aligns with passive reconnaissance, which relies on open-source intelligence (OSINT) and does not send any packets to the target's network. The CEH defines passive reconnaissance as gathering information without engaging the target, making option A correct.

Answer

Active reconnaissance

Answer

Vulnerability scanning

Answer

Social engineering

Question 10

A penetration tester is attempting to evade an IDS/IPS while performing a port scan. They use the Nmap command: nmap -sS -f --data-length 20 -D RND:10 10.0.0.1. Which techniques are being employed to evade detection?

Accepted Answer

Fragmentation, decoy, and using a random source IP. Option C is correct because the Nmap command `-sS -f --data-length 20 -D RND:10` employs three evasion techniques: fragmentation (the `-f` flag splits the TCP SYN packet into smaller fragments to bypass simple packet inspection), decoy scanning (`-D RND:10` generates 10 random decoy source IP addresses to obscure the real scanning host), and using a random source IP (the `RND:10` mechanism effectively randomizes the source IP of the probes, making it harder for the IDS/IPS to attribute the scan to a single attacker).

Answer

Idle scan, fragmentation, and MAC address spoofing

Answer

Packet timing manipulation, decoy, and avoiding DNS resolution

Answer

Fragmentation, decoy, and source port spoofing

Question 11

A security analyst receives an alert about a scan originating from an IP address that appears to be using a 'sIdle scan' technique. Which of the following characteristics would confirm this?

Accepted Answer

The scan sends SYN packets with the zombie host's IP address as the source and monitors IPID changes on the zombie to determine open ports. Option C is correct because an idle scan (also known as a zombie scan) relies on sending SYN packets to the target with the spoofed source IP address of a zombie host, then monitoring the IPID sequence on that zombie to infer whether the target port is open, closed, or filtered. The key characteristic is the use of the zombie's IP as the source and the observation of IPID changes on the zombie, which is exactly what option C describes.

Answer

The scan uses fragmented packets and decoy IP addresses

Answer

The scan uses FTP bounce to hide the true source IP

Answer

The scan shows a SYN packet with the attacker's real IP but uses a zombie host to relay replies

Question 12

A junior penetration tester runs the command: whois example.com. What type of information are they MOST likely trying to obtain?

Accepted Answer

Domain registration details such as registrar, creation date, and contact information. The `whois` command queries a WHOIS server (typically operated by a Regional Internet Registry or domain registrar) to retrieve domain registration details. This includes the registrar name, creation and expiration dates, name servers, and often administrative/technical contact information. It is a core footprinting technique used to gather publicly available metadata about a domain owner and infrastructure.

Answer

DNS zone transfer information

Answer

The IP address of the web server

Answer

Open ports on the target server

Question 13

A security analyst is planning a reconnaissance activity that must remain undetected. Which TWO of the following techniques should they choose?

Accepted Answer

Gather information from public OSINT sources like Shodan and social media. Option B is correct because OSINT sources like Shodan and social media provide publicly available information without interacting with the target's systems, keeping the reconnaissance passive and undetected. Option C is correct because passive reconnaissance via DNS records (e.g., using cached or third-party DNS databases) avoids querying the target's authoritative DNS servers, thus not generating logs or alerts on the target's infrastructure.

Answer

Engage in social engineering to extract network diagrams from employees

Answer

Use Nmap with default scripts to enumerate services

Answer

Perform a full TCP connect scan on all ports

Question 14

During a penetration test, you need to enumerate all DNS records for example.com using a zone transfer. Which TWO tools can be used to attempt this?

Accepted Answer

dnsenum. A is correct because dnsenum is a specialized tool designed to enumerate DNS information, including attempting a zone transfer (AXFR query) to retrieve all DNS records for a domain. It automates the process of querying the DNS server for a full zone transfer, which is the primary method to enumerate all records if the server is misconfigured to allow it.

Answer

dig

Answer

theHarvester

Answer

nslookup

Question 15

Which THREE of the following are valid Nmap port states?

Accepted Answer

Open. Option A is correct because Nmap classifies a port as 'open' when it receives a SYN/ACK response to a SYN probe, indicating that an application is actively listening on that port. This is the standard TCP three-way handshake behavior defined in RFC 793, and it is the most fundamental port state in Nmap's scanning logic.

Answer

Blocked

Answer

Stealth

Question 16

A security analyst wants to perform passive reconnaissance on a target organization without generating any traffic to the target's network. Which of the following techniques would be MOST appropriate?

Accepted Answer

Performing a WHOIS lookup. WHOIS lookup is a passive reconnaissance technique that queries public databases (e.g., whois.arin.net) for domain registration details without sending any packets to the target's network. It relies on external, publicly available data, thus generating zero traffic to the target organization's infrastructure.

Answer

Running Nmap SYN scan

Answer

Executing hping3 to probe ports

Answer

Using Netcat to connect to a service

Question 17

Which of the following tools is specifically designed to perform Google dorking and automate searching for vulnerable web applications and sensitive information?

Accepted Answer

Googledork. Googledork (also known as Google Dork) is a tool specifically designed to automate Google dorking queries, which use advanced search operators to find vulnerable web applications and sensitive information exposed in search results. It systematically executes predefined dork queries against Google's index to identify SQL injection points, exposed configuration files, login pages, and other security weaknesses, making it the correct choice for this task.

Answer

Maltego

Answer

theHarvester

Answer

Shodan

Question 18

During a penetration test, you need to identify all live hosts on a target network without being detected by intrusion detection systems. Which Nmap flag would BEST achieve this?

Accepted Answer

-sn (ping sweep). The -sn flag (ping sweep) sends ICMP echo requests, TCP SYN to port 443, TCP ACK to port 80, and ICMP timestamp requests by default to determine if a host is alive. This is the best choice for stealthy host discovery because it does not complete a full TCP handshake or send application-layer probes, minimizing the chance of triggering IDS signatures that look for port scans or OS fingerprinting.

Answer

-O (OS fingerprinting)

Answer

-sS (SYN scan)

Answer

-sV (version detection)

Question 19

A penetration tester executes the following command: nmap -sS -p 1-1000 --script banner 192.168.1.10. After the scan, the tester notices several filtered ports. Which of the following BEST explains why Nmap reports a port as "filtered"?

Accepted Answer

A firewall is blocking the probe packets, and Nmap cannot determine if the port is open. Option B is correct because Nmap's SYN scan (-sS) sends a SYN packet to the target port. When the probe receives no response or an ICMP unreachable message (e.g., type 3 code 13), Nmap classifies the port as 'filtered'. This typically indicates a firewall, ACL, or network filter is dropping the packets, preventing Nmap from determining whether the port is open or closed.

Answer

The port is open, and the service is responding with a banner

Answer

The port is open and actively listening

Answer

The port is closed and the target sent an RST packet

Question 20

A security analyst is performing reconnaissance on a target domain and wants to discover all subdomains using DNS enumeration. Which of the following commands would be MOST effective for performing a DNS zone transfer attempt?

Accepted Answer

dnsrecon -d example.com -t axfr. Option D is correct because the `-t axfr` flag in `dnsrecon` specifically attempts a DNS zone transfer (AXFR query) against the target domain's authoritative nameservers. A successful zone transfer returns all DNS records, including all subdomains, making it the most direct and effective method for subdomain enumeration via DNS zone transfer.

Answer

dig example.com ANY

Answer

nslookup -type=ns example.com

Answer

theHarvester -d example.com -l 500 -b google