A network administrator needs to profile IP phones using CDP. Which probe must be enabled on the ISE Policy Service Node (PSN) to ensure CDP information is processed?
You are configuring Cisco ISE Profiling for a network segment with IP phones that do not support LLDP-MED. Which probe combination is most effective for identifying these endpoints with high confidence?
A administrator notices that certain medical devices are being intermittently profiled as 'Unknown' despite having a valid Profiling Policy. What is the most likely cause related to the Profiler Feed Service?
A Cisco ISE administrator needs to profile endpoints that are connected to a Cisco Catalyst 9000 switch. The switch is configured with the 'device-sensor filter-list dhcp' command and the 'device-sensor filter-spec dhcp' command. However, ISE is not receiving any DHCP profiling data from the switch. Which action must be taken on the switch to allow the device sensor to send DHCP attributes to ISE?
A network administrator is configuring profiling policies in Cisco ISE to identify Cisco IP Phones. The administrator wants to ensure that the phones are correctly profiled and placed in the appropriate endpoint identity group. Which probe provides the most reliable and detailed information for profiling Cisco IP Phones, especially when they are connected to the network?
A network administrator is deploying Cisco ISE profiling in a network where IP phones are connected to Cisco switches. The administrator wants to ensure that the phones are profiled accurately using CDP. Which probe must be enabled on the ISE Policy Service node to collect CDP attributes from the switches?
You want to improve profiling accuracy for endpoints that do not send DHCP options. You decide to use SNMP Trap profiling. What is a critical prerequisite for this to function?
You are configuring a custom profiling policy and notice that the 'Certainty Factor' is too low for the device to be assigned to the correct group. What is the purpose of the Certainty Factor in ISE?
You are troubleshooting an issue where IP phones are not being profiled. The SNMP read community string on the switch does not match the one configured in ISE. What is the expected behavior?
You have created a custom profiler condition that is not matching endpoints correctly. Where should you check the live authentication and profiling logs to verify if the attribute is being received by ISE?
You are configuring a DHCP probe on a Cisco ISE node to identify endpoints. Which specific configuration step is required to ensure the ISE node receives DHCP traffic when the client and server are on a different subnet?
When a new device connects, you notice it stays in the 'Unknown' profile state. You have confirmed the probes are active. What is the most likely step to fix this?
You are using the Feed Service to update your profiling policies. How can you ensure that custom profiling policies you have created are not overwritten during the update?
A user reports that a device was incorrectly identified as a 'Cisco IP Phone' when it is actually a 'Cisco Access Point'. Which troubleshooting step should you take first?
You are troubleshooting a device that is stuck in the 'Unknown' profile state. You have confirmed that the DHCP probe is receiving packets. What is the next logical step to investigate the failure?
A security engineer is configuring a Cisco ISE profiling policy to identify and authorize endpoints. The engineer wants to use the SNMP Query probe to gather attributes from network devices. Which two statements are true regarding the SNMP Query probe in Cisco ISE? (Choose two.)
An administrator is configuring profiling in Cisco ISE and wants to ensure that the MAC OUI probe is used to identify the manufacturer of endpoints. Which statement correctly describes the MAC OUI probe?
A network engineer configures a Cisco ISE deployment with profiler probes enabled on the Policy Service nodes. After deploying a new Cisco Catalyst 9300 switch, the engineer notices that endpoints connected to that switch are not appearing in the Endpoints list, even though they are passing 802.1X authentication. The engineer verifies that the switch is sending RADIUS accounting packets to ISE. Which probe should the engineer verify is enabled to collect endpoint attributes from the switch itself?
A security administrator is troubleshooting why a particular endpoint is being profiled as a generic 'Windows Workstation' instead of the more specific 'Windows 10 Enterprise' policy. The administrator checks the Profiling Policies and sees that the 'Windows 10 Enterprise' policy has a minimum certainty factor of 20, while the endpoint's current certainty factor is 18. The administrator also notices that the endpoint has matching attributes for both policies. What is the most likely reason the endpoint is not matching the more specific policy?
A network security engineer is configuring profiling policies in Cisco ISE to identify and classify endpoints. The engineer wants to ensure that the profiling policies correctly match endpoints based on multiple conditions. Which two statements are true regarding profiling policy conditions and certainty factors? (Choose two.)
A network administrator is configuring Cisco ISE profiling for a new branch office. The administrator wants to ensure that endpoints are profiled based on information collected from DHCP packets. Which probe must be enabled on the Policy Service node to collect DHCP attributes?