156-315.81.20 Threat Prevention and SandBlast — All Questions With Answers

Question 1mediummultiple choice

Read the full Threat Prevention and SandBlast explanation →

Which SandBlast Threat Emulation feature is specifically designed to minimize the impact of file delivery delays on end-users?

Question 2hardmultiple choice

Read the full Threat Prevention and SandBlast explanation →

Refer to the exhibit. An administrator sees the provided debug output after a user reports connectivity issues. Based on the drop reason, what is the most likely cause?

Exhibit

fw ctl zdebug drop | grep 192.168.1.50
[DATE] [TIME] drop: 192.168.1.50 > 10.0.0.5: ICMP Echo Request; reason: IPS Drop: Malicious DNS/IP Activity

Question 3mediummultiple choice

Read the full Threat Prevention and SandBlast explanation →

When configuring a Threat Prevention profile, what is the primary difference between 'Staging' and 'Prevent' modes for a specific protection?

Question 4hardmultiple choice

Read the full Threat Prevention and SandBlast explanation →

Refer to the exhibit. Why did the Threat Emulation blade bypass the file?

Exhibit

IPS Protections Log:
Signature: EICAR_Test_File
Status: Detected
Protection: Prevent

Threat Emulation Log:
Status: Bypass
Reason: File already cleared by local Antivirus blade.

Question 5hardmulti select

Read the full Threat Prevention and SandBlast explanation →

Which THREE file types are typically supported for inspection by the Threat Emulation blade?

Question 6mediummultiple choice

Read the full Threat Prevention and SandBlast explanation →

Refer to the exhibit. The admin sees 'Suspicious' in the logs. What does this indicate about the file's classification?

Exhibit

Policy: Rule 5
- Source: Internal_Net
- Destination: Any
- Service: Any
- Threat Prevention: Standard_Profile
- Action: Accept

Log: Threat Emulation - File: malicious.exe - Action: Blocked - Verdict: Suspicious

Question 7mediummulti select

Read the full Threat Prevention and SandBlast explanation →

Which THREE of the following are benefits of the 'ThreatCloud' service for an enterprise gateway? (Choose three)

Question 8mediummultiple choice

Read the full Threat Prevention and SandBlast explanation →

An administrator wants to ensure that Threat Emulation is only applied to web-downloaded files, excluding internal file shares. How can this be achieved?

Question 9mediummultiple choice

Read the full Threat Prevention and SandBlast explanation →

An administrator notes that a specific file is being 'Bypassed' by Threat Emulation. What is the most likely cause?

Question 10mediummultiple choice

Read the full Threat Prevention and SandBlast explanation →

An administrator notices that the Threat Prevention blade is inspecting traffic, but suspected zero-day malware is passing through without triggering Threat Emulation. The files are transferred over standard HTTP. Upon investigation, the gateway's Threat Emulation profile is set to inspect archives, and the file size is within the allowed limit. What is the most likely cause of this behavior?

Question 11hardmultiple choice

Read the full Threat Prevention and SandBlast explanation →

A security engineer observes that Threat Emulation is inspecting files, but the gateway is not sending files to ThreatCloud for analysis. The engineer verifies that the ThreatCloud component is enabled and the gateway has internet connectivity. Which configuration setting should be checked next to ensure files are sent to ThreatCloud for emulation?

Question 12mediummultiple choice

Read the full Threat Prevention and SandBlast explanation →

An administrator notices that a specific executable file was allowed by Threat Emulation even though it was later found to be malicious. The administrator wants to ensure that such files are blocked in the future. Which action should be taken?

Question 13hardmulti select

Read the full Threat Prevention and SandBlast explanation →

A security administrator is configuring Threat Prevention on a Check Point Security Gateway and wants to ensure that Threat Emulation and Threat Extraction work together effectively to protect against malicious files. Which TWO actions should the administrator take to optimize this configuration? (Choose two.)

Question 14mediummultiple choice

Read the full Threat Prevention and SandBlast explanation →

A security administrator has configured a Threat Prevention policy that applies a Threat Emulation profile to HTTP and HTTPS traffic. Users report that a downloaded file was allowed after emulation determined it was benign. However, the administrator later discovers the same file hash was previously identified as malicious by ThreatCloud. Which Threat Prevention component should be reviewed to ensure it is enabled and properly configured to catch such known threats before emulation?

Question 15mediummultiple choice

Read the full Threat Prevention and SandBlast explanation →

A security administrator has configured a Threat Prevention policy with the 'Recommended' profile on a R81 Security Gateway. They notice that Threat Emulation is skipping files that are larger than 20 MB. What is the most likely reason for this behavior?

Question 16mediummultiple choice

Read the full Threat Prevention and SandBlast explanation →

An administrator is configuring Threat Prevention on a Check Point R81 gateway. They want to ensure that files downloaded from the internet are inspected for malicious content, but they also need to minimize the impact on user productivity. Which Threat Prevention profile setting should they use to achieve a balance between security and performance?

Question 17hardmulti select

Read the full Threat Prevention and SandBlast explanation →

A Check Point administrator is troubleshooting why Threat Extraction is not sanitizing a PDF file downloaded from a web server. The file is being allowed without any modification. Which TWO of the following are possible reasons for this behavior? (Choose two.)

Question 18mediummultiple choice

Read the full Threat Prevention and SandBlast explanation →

An administrator needs to verify that the ThreatCloud Intelligence feeds are being updated correctly on a Security Management Server. The administrator runs the command 'cpstat threatcloud' on the management server, but receives no output. What is the most likely reason for this behavior?

Question 19mediummultiple choice

Read the full Threat Prevention and SandBlast explanation →

A Check Point administrator wants to test a new Threat Prevention policy that includes Threat Emulation and Anti-Bot blades. The administrator wants to see which files would be emulated and which connections would be blocked without actually enforcing the policy on users. Which feature should be used?

Question 20hardmulti select

Read the full Threat Prevention and SandBlast explanation →

A security administrator is configuring Threat Emulation on a Check Point gateway. The administrator wants to ensure that emulation is performed for files that are downloaded via email attachments and web downloads. Which two actions must be configured in the Threat Prevention policy to achieve this? (Choose two.)

Question 21mediummultiple choice

Read the full Threat Prevention and SandBlast explanation →

An administrator notices that the Threat Extraction blade is converting incoming Microsoft Word documents into static PDF files, but users complain that embedded dynamic macros are completely missing from the converted documents. What is the cause of this behavior?

Question 22hardmultiple choice

Read the full Threat Prevention and SandBlast explanation →

A security engineer configures Threat Emulation to inspect incoming archive files containing nested compressed directories. During testing, an archive containing six nested levels of ZIP files bypasses deep emulation inspection. What is the most likely configuration cause?

Question 23mediummultiple choice

Read the full Threat Prevention and SandBlast explanation →

An administrator configures a Threat Emulation profile to use 'Hold until scanned' mode for email traffic. Users report that inbound emails with PDF attachments are delayed by several minutes. What is the operational impact and architectural reason for this delay?

Question 24mediummulti select

Read the full Threat Prevention and SandBlast explanation →

Which TWO of the following are primary components of the Check Point SandBlast Threat Extraction solution?

Question 25easymultiple choice

Read the full Threat Prevention and SandBlast explanation →

Which component acts as the centralized repository for global threat intelligence in a Check Point deployment?

Question 26hardmulti select

Read the full Threat Prevention and SandBlast explanation →

Which THREE of the following are valid methods for deploying the SandBlast Threat Emulation service?

Question 27mediummultiple choice

Read the full Threat Prevention and SandBlast explanation →

A security administrator needs to ensure that all encrypted traffic is inspected by the Threat Prevention blades. What is the mandatory requirement for this?

Question 28mediummultiple choice

Read the full Threat Prevention and SandBlast explanation →

Which file type is most commonly targeted by Threat Extraction for active content removal?

Question 29hardmultiple choice

Read the full Threat Prevention and SandBlast explanation →

Refer to the exhibit. Why was 'invoice.pdf' blocked?

Exhibit

Object: Protected_Network
Blade: Threat Emulation
Status: Active
Action: Prevent
Emulation Location: Cloud
Fallback Action: Block

Result: File 'invoice.pdf' blocked due to 'Inconclusive' emulation result.

Question 30mediummultiple choice

Read the full Threat Prevention and SandBlast explanation →

What is the primary function of the 'ThreatCloud' service in the context of SandBlast Threat Prevention?

Question 31easymultiple choice

Read the full Threat Prevention and SandBlast explanation →

Which of the following describes the 'Threat Emulation' process correctly?

Question 32mediummultiple choice

Read the full Threat Prevention and SandBlast explanation →

In which scenario should a security administrator choose to use 'Threat Extraction' over 'Threat Emulation'?

Question 33mediummulti select

Read the full Threat Prevention and SandBlast explanation →

Which TWO of the following are benefits of using the Threat Prevention 'Recommended' profile over a custom profile?

Question 34mediummultiple choice

Read the full Threat Prevention and SandBlast explanation →

How can an administrator monitor the effectiveness of the Threat Prevention blades over time?

Question 35mediummultiple choice

Read the full Threat Prevention and SandBlast explanation →

An administrator notices that files are being successfully blocked by Threat Emulation, but the user is not seeing the block notification page. Which configuration must be verified to ensure the user receives the notification?

Question 36hardmultiple choice

Read the full Threat Prevention and SandBlast explanation →

Refer to the exhibit. An administrator is troubleshooting a file download issue. The CLI output confirms the file is blocked by Threat Emulation. What is the next logical step to investigate why this specific file was classified as malicious?

Exhibit

fw ctl zdebug drop | grep 192.168.1.50
[DROP]: [THREAT_PREVENTION] Reason: Emulation block - File: invoice.pdf

Question 37mediummulti select

Read the full Threat Prevention and SandBlast explanation →

Which TWO of the following are primary functions of the Threat Extraction blade in Check Point SandBlast? (Choose two)

Question 38mediummultiple choice

Read the full Threat Prevention and SandBlast explanation →

What is the primary advantage of deploying Threat Emulation on a Security Gateway rather than just using endpoint-based protection?

Question 39easymultiple choice

Read the full Threat Prevention and SandBlast explanation →

Which component of the Check Point Threat Prevention architecture is responsible for providing real-time, global threat intelligence updates to the security gateway?

Question 40mediummultiple choice

Read the full Threat Prevention and SandBlast explanation →

When configuring Threat Prevention, what is the significance of the 'Hold' vs. 'Background' emulation mode?

Question 41hardmultiple choice

Read the full Threat Prevention and SandBlast explanation →

An organization requires that all incoming files be sanitized immediately to ensure business continuity. Which configuration setting is most appropriate?

Question 42mediummultiple choice

Read the full Threat Prevention and SandBlast explanation →

Why might a file be marked as 'Emulation Failed' in the logs?

Question 43hardmultiple choice

Read the full Threat Prevention and SandBlast explanation →

What happens if a user tries to download a file, and the Threat Emulation service is temporarily unreachable?

Question 44hardmultiple choice

Read the full Threat Prevention and SandBlast explanation →

A security administrator has enabled the Threat Extraction blade on a gateway and set it to extract and sanitize all PDF files delivered to users. A user reports that a PDF file now contains only text and images, but all interactive form fields are gone. The administrator checks the Threat Extraction log and sees the action 'Extract'. Which statement explains this behavior?

Question 45mediummultiple choice

Read the full Threat Prevention and SandBlast explanation →

A security administrator notices that a user downloaded a file that was flagged as malicious by Threat Emulation, but the file was not blocked. The Threat Prevention policy shows that the Threat Emulation blade is set to 'Detect' mode for that user group. What is the most likely reason the file was not blocked?

Question 46easymultiple choice

Read the full Threat Prevention and SandBlast explanation →

A Check Point administrator wants to ensure that files downloaded from the internet are inspected by Threat Emulation before reaching the user. Which blade must be enabled in the Threat Prevention policy to achieve this?

Question 47mediummultiple choice

Read the full Threat Prevention and SandBlast explanation →

A security administrator is configuring Threat Prevention on a R81.20 Security Gateway. They enable Threat Emulation for incoming files and want to reduce the gateway's CPU load by having emulation performed by a dedicated appliance rather than the gateway itself. Which Check Point component should they deploy and configure to achieve this?

Question 48easymultiple choice

Read the full Threat Prevention and SandBlast explanation →

An administrator is reviewing Threat Prevention logs and notices that a file was marked as 'Benign' by Threat Emulation. The file was downloaded from a known malicious site but did not exhibit malicious behavior during emulation. What is the most likely reason for this verdict?

Question 49hardmulti select

Read the full Threat Prevention and SandBlast explanation →

An administrator is configuring Threat Extraction on a R81.20 Security Gateway. They want to ensure that files are sanitized and delivered quickly while maintaining security. Which TWO actions should they take? (Choose two.)

Question 50mediummultiple choice

Read the full Threat Prevention and SandBlast explanation →

A security administrator notices that Threat Emulation is bypassing all files from a specific internal server. They want to ensure that files from this server are emulated. What is the most likely reason for the bypass, and how can it be resolved?

Question 51hardmultiple choice

Read the full Threat Prevention and SandBlast explanation →

An administrator is troubleshooting why Threat Emulation is not inspecting files downloaded over HTTPS. The gateway is configured with HTTPS Inspection, but files are still bypassing emulation. What is the most likely cause?

Question 52mediummulti select

Read the full Threat Prevention and SandBlast explanation →

A security administrator is configuring a Check Point R81 gateway running Threat Emulation and Threat Extraction blades. They want to ensure that files downloaded by users are inspected and, when necessary, sanitized before delivery. Which two of the following statements correctly describe the behavior of Threat Extraction? (Choose two.)

Question 53hardmultiple choice

Read the full Threat Prevention and SandBlast explanation →

A Check Point R81 gateway is configured with Threat Emulation. An administrator notices that a suspicious executable file downloaded via HTTP was not emulated. The log shows the action as 'Bypassed'. Which of the following is the most likely reason for this bypass?

Question 54easymultiple choice

Read the full Threat Prevention and SandBlast explanation →

An administrator is configuring Threat Emulation on a Check Point R81.20 Security Gateway. The administrator wants to ensure that files downloaded from the internet are inspected in a sandbox environment. Which of the following best describes the function of the Threat Emulation blade?

Question 55hardmultiple choice

Read the full Threat Prevention and SandBlast explanation →

A Check Point administrator is troubleshooting a Threat Emulation issue where a specific PDF file was not emulated, despite the Threat Prevention policy being configured to inspect PDFs. The log shows the file was allowed with the action 'Bypass' under Threat Emulation. The administrator verifies that the file is not password-protected and is under the maximum file size limit. What is the most likely reason for the bypass?

Question 56hardmultiple choice

Read the full Threat Prevention and SandBlast explanation →

A Check Point R81 gateway is using Threat Emulation. An administrator observes that a PDF file was emulated, and the log shows the verdict as 'Malicious'. However, the user was able to open the file without any warning. What is the most likely cause of this behavior?

Question 57mediummulti select

Read the full Threat Prevention and SandBlast explanation →

A security administrator is configuring Threat Prevention profiles on a Check Point R81.20 Security Gateway. The administrator wants to ensure that the organization benefits from Check Point's recommended settings for Threat Emulation and Threat Extraction. Which two of the following are characteristics of the 'Recommended' Threat Prevention profile? (Choose two.)

Question 58hardmultiple choice

Read the full Threat Prevention and SandBlast explanation →

A Check Point administrator is analyzing logs and notices that a file was marked as 'Emulation Failed' in the Threat Emulation logs. The file was downloaded from a reputable website and is a common document format. The administrator wants to understand why this status occurred. Which of the following is the most likely cause for an 'Emulation Failed' status?

Question 59easymultiple choice

Read the full Threat Prevention and SandBlast explanation →

A security analyst is reviewing logs and sees multiple entries indicating that files were sent to Threat Emulation but the verdict was 'Malicious'. However, the files were not blocked. What is the most likely cause?

Question 60hardmultiple choice

Read the full Threat Prevention and SandBlast explanation →

A security engineer configures a Threat Prevention profile with Threat Emulation enabled for PDF files. Users report that some PDF files are not being emulated, and the logs show the action 'Bypass' with the reason 'File size exceeds limit'. The engineer wants to ensure all PDFs are inspected without overloading the gateway. What is the most appropriate action?

Question 61easymultiple choice

Read the full Threat Prevention and SandBlast explanation →

An administrator notices that the Threat Emulation blade is not inspecting files downloaded over HTTP from a specific internal web server. The administrator confirms that the Threat Prevention policy includes the internal network as a protected scope. What is the most likely reason?

Policy: Rule 5 - Source: Internal_Net - Destination: Any - Service: Any - Threat Prevention: Standard_Profile - Action: Accept Log: Threat Emulation - File: malicious.exe - Action: Blocked - Verdict: Suspicious

Object: Protected_Network Blade: Threat Emulation Status: Active Action: Prevent Emulation Location: Cloud Fallback Action: Block Result: File 'invoice.pdf' blocked due to 'Inconclusive' emulation result.