SAA-C03 Timed Hard Questions — 25 Difficult Questions

Question 1

A warehouse integration service must use shared file storage across Linux EC2 instances in multiple Availability Zones. The storage must remain available during an AZ failure. Which service should be used? The architecture review board prefers a managed AWS-native control.

Accepted Answer

Amazon EFS with mount targets in multiple Availability Zones. Amazon EFS provides a fully managed, NFS-based shared file system that can be mounted concurrently by multiple Linux EC2 instances across different Availability Zones. By creating mount targets in each AZ, the file system remains accessible even if one AZ fails, as traffic is automatically routed to the surviving mount targets. This meets the requirement for shared, resilient storage with a managed AWS-native control plane.

Answer

S3 mounted as a POSIX file system without a file gateway

Answer

Instance store volumes

Answer

An EBS volume attached to all instances

Question 2

A SaaS vendor’s automation account in Account B needs to assume a role in a customer account in Account A to read a specific S3 bucket and publish a deployment status file. The customer is worried about confused deputy attacks because multiple customers use the same vendor software. Which trust-policy design best meets the requirement?

Accepted Answer

Allow only the vendor’s specific IAM principal to assume the role and require a unique sts:ExternalId condition.. Option B is correct because the `sts:ExternalId` condition is specifically designed to prevent the confused deputy problem in cross-account role assumptions. By requiring a unique external ID that only the customer knows, the customer ensures that the vendor's automation can only assume the role when acting on behalf of that specific customer, even if multiple customers use the same vendor software.

Answer

Allow the Account B root principal to assume the role if the caller knows the role ARN.

Answer

Attach a permissions boundary to the role so that the vendor cannot exceed the approved permissions.

Answer

Require MFA for the role assumption because it ensures only the vendor’s production automation can use the role.

Question 3

A serverless checkout API uses AWS Lambda behind API Gateway. Every weekday at 09:00 UTC, marketing triggers a predictable surge. The first few minutes after each surge show cold-start latency, but traffic volume is forecastable and the business wants stable p95 latency. Which two changes should the team implement? Select two.

Accepted Answer

Publish a Lambda version and attach provisioned concurrency to an alias that points to that version.. Provisioned concurrency keeps a specified number of Lambda execution environments initialized and ready to respond immediately, eliminating cold starts for predictable traffic patterns. By publishing a Lambda version and attaching provisioned concurrency to an alias pointing to that version, the team ensures that the surge at 09:00 UTC is handled without cold-start latency, stabilizing p95 latency.

Answer

Increase the Lambda timeout so the function has more time to initialize during the spike.

Answer

Double the memory size during the spike without changing the concurrency model.

Answer

Move the function into more Availability Zones so the platform can spread cold starts across regions.

Question 4

A warehouse integration service must process every event at least once, but duplicate processing is acceptable if the consumer handles idempotency. Which eventing approach is most suitable? The architecture review board prefers a managed AWS-native control.

Accepted Answer

Use Amazon SQS standard queue and design consumers to be idempotent. Amazon SQS standard queues provide at-least-once delivery, which guarantees that every message is processed at least once, meeting the requirement that every event must be processed. Duplicate processing is acceptable because the consumer can be designed to handle idempotency. This is a managed, AWS-native service that aligns with the architecture review board's preference.

Answer

Use CloudFront signed URLs

Answer

Use UDP messages sent directly to workers

Answer

Use an in-memory queue on one EC2 instance

Question 5

A studio keeps 4 PB of completed video projects in Amazon S3. Editors work on active projects for about 60 days, auditors occasionally review the same objects for several months, and legal policy requires retention for 7 years. Retrieval of very old files can take hours. Which three actions should the architect recommend? Select three.

Accepted Answer

Transition objects to S3 Standard-IA after 60 days.. Option A is correct because after 60 days of active editing, objects can be transitioned to S3 Standard-IA, which offers lower storage costs than S3 Standard while still providing low-latency retrieval for occasional access by auditors. This lifecycle policy optimizes cost without sacrificing availability for the review period.

Answer

Keep the files in S3 Standard indefinitely so retrieval is always fast.

Answer

Copy the files to a single EBS volume for lower per-GB cost.

Question 6

Based on the exhibit, which change best reduces latency during peak traffic without overprovisioning the fleet?

Accepted Answer

Change the Auto Scaling policy to target tracking on ALB RequestCountPerTarget.. Option B is correct because using a target tracking scaling policy on ALB RequestCountPerTarget dynamically adjusts the fleet size based on the actual number of requests each instance receives. This ensures that during peak traffic, additional instances are added only when needed, reducing latency by distributing the load without overprovisioning. It directly addresses the goal of minimizing latency during spikes while maintaining cost efficiency.

Answer

Replace the instances with a larger instance family so each server has more headroom.

Answer

Use scheduled scaling to add instances only during the business hours peak window.

Answer

Replace the ALB with a Network Load Balancer to reduce request latency.

Question 7

A CI system runs on EC2 instances in private subnets and uploads build artifacts to an S3 bucket. The security team wants to eliminate NAT Gateway costs, force all uploads to use TLS, and require SSE-KMS with an approved customer managed key. Which three changes should be made? Select three.

Accepted Answer

Create an S3 gateway VPC endpoint and associate it with the private subnets' route tables.. Option A is correct because creating an S3 gateway VPC endpoint allows EC2 instances in private subnets to access S3 without traversing the internet, eliminating the need for a NAT Gateway and its associated costs. The endpoint uses AWS’s internal network, and associating it with the private subnets' route tables ensures traffic to S3 is routed through the endpoint.

Answer

Deploy a NAT Gateway in each Availability Zone and route artifact traffic through it.

Answer

Use the S3 static website endpoint because it automatically enforces HTTPS.

Question 8

A regional web application for a content publishing system must fail over automatically to a secondary Region if the primary endpoint becomes unhealthy. Which two services or features are required?

Accepted Answer

Route 53 failover routing with health checks. Route 53 failover routing with health checks (B) is required because it continuously monitors the health of the primary endpoint and automatically reroutes traffic to a secondary Region when the primary becomes unhealthy. This is achieved by configuring a primary and secondary failover record set in Route 53, where the health check is associated with the primary record. When the health check fails, Route 53 returns the secondary record's IP address, enabling automatic failover at the DNS level.

Answer

AWS Organizations service control policies

Answer

S3 Transfer Acceleration

Question 9

A claims workflow requires point-in-time recovery and accidental-delete protection for a DynamoDB table. Which two settings should the architect enable? The design must avoid adding custom operational scripts.

Accepted Answer

Point-in-time recovery. Point-in-time recovery (PITR) for DynamoDB enables continuous backups with 35-day granularity, allowing restoration to any second within that window. This directly satisfies the point-in-time recovery requirement without custom scripts, as it is a native AWS feature.

Answer

DAX

Answer

Global secondary indexes

Question 10

A claims portal must ensure that only encrypted EBS volumes can be created in the account. What is the strongest preventive control?

Accepted Answer

Use an SCP that denies ec2:CreateVolume when the encrypted condition is false. Option C is correct because Service Control Policies (SCPs) are a preventive control that can deny the ec2:CreateVolume action when the encryption condition is false. This ensures that unencrypted EBS volumes cannot be created at all, enforcing encryption at the point of creation across the entire AWS account or organizational unit.

Answer

Tag encrypted volumes after creation

Answer

Enable VPC Flow Logs

Answer

Run a daily Lambda function to encrypt unencrypted volumes

Question 11

Based on the exhibit, a development team in member accounts can create IAM roles, but one team created a role without the required permissions boundary. Security wants to ensure that no future role in the organization can exceed the approved boundary, even if a developer has broad IAM permissions. What is the best control to add?

Accepted Answer

Add an SCP that denies iam:CreateRole and iam:PutRolePermissionsBoundary unless the request specifies the ApprovedAppBoundary ARN.. Option B is correct because a Service Control Policy (SCP) at the organization root or in the member account's OU can deny IAM actions unless the required permissions boundary (ApprovedAppBoundary) is specified. This prevents any role creation or modification that would bypass the boundary, even if the developer has full IAM permissions in their account. SCPs are the only control that can enforce this across all principals in an account, including the account root user.

Answer

Add a permission boundary to the developer role that points to ApprovedAppBoundary.

Answer

Use an S3 bucket policy to block policy documents that grant AdministratorAccess.

Answer

Require team members to use STS session policies when they create new roles.

Question 12

A DynamoDB table for a travel booking site has a partition key based only on the current date. Write throttling occurs during business hours. What is the best design change? The architecture review board prefers a managed AWS-native control.

Accepted Answer

Use a higher-cardinality partition key that distributes writes across partitions. Option D is correct because using a low-cardinality partition key like the current date causes all writes to land on a single partition, leading to throttling. By choosing a higher-cardinality partition key (e.g., combining date with a user ID or booking ID), writes are distributed evenly across multiple partitions, leveraging DynamoDB's internal partitioning to handle the throughput. This is a managed, AWS-native design change that resolves hot partition issues without additional services.

Answer

Create a global secondary index with the same date key

Answer

Move the table to S3 Glacier Instant Retrieval

Answer

Reduce the table's write capacity

Question 13

A distributed analytics engine runs 12 EC2 instances in one Availability Zone. The nodes exchange thousands of tiny messages per second and must keep jitter as low as possible. The current design launches the instances across multiple placement groups and uses general-purpose burstable instances. Which two changes will most directly lower east-west network latency and variability? Select two.

Accepted Answer

Move all instances into a cluster placement group.. A cluster placement group provides a low-latency, high-bandwidth network connection by placing instances in a single Availability Zone within the same logical rack or cluster. This minimizes the physical distance and network hops between instances, directly reducing east-west latency and jitter for the thousands of tiny messages per second.

Answer

Spread the instances across three Availability Zones for better fault tolerance.

Answer

Front the nodes with an Application Load Balancer to balance the internal messages.

Answer

Store the messages on EBS volumes so the nodes avoid network communication.

Question 14

A customer portal uses Amazon Aurora MySQL. The application currently sends all SELECT queries to the writer instance endpoint. During traffic spikes, read latency increases, and the team wants the cluster to survive a writer failover without manual endpoint changes for the application. Which changes should the team make? Select three.

Accepted Answer

Replace the hard-coded DB instance endpoint with the Aurora reader endpoint for read traffic.. Option A is correct because the Aurora reader endpoint automatically distributes read-only connections across all available Aurora Replicas, including the writer instance if it is configured to accept reads. This eliminates the need for manual endpoint changes during a failover, as the reader endpoint remains constant while the underlying instances change.

Answer

Keep sending all traffic to the writer endpoint because it always has the freshest data.

Answer

Replace Aurora with a single larger RDS instance and continue using the same read pattern.

Question 15

A claims portal uses Amazon RDS for PostgreSQL. Application credentials must not be stored on the EC2 instances, and authentication should use short-lived credentials. What should the architect recommend?

Accepted Answer

IAM database authentication for RDS with an EC2 instance role. IAM database authentication for RDS with an EC2 instance role allows the application to obtain a short-lived authentication token (valid for 15 minutes) using the AWS CLI or SDK, without storing any credentials on the instance. The EC2 instance role provides the necessary permissions to generate the token, which is then used instead of a static password, meeting both security requirements.

Answer

Store the database password in user data

Answer

Embed the database password in the AMI

Answer

Use a security group rule that allows only application instances

Question 16

A DynamoDB table for a retail API has a partition key based only on the current date. Write throttling occurs during business hours. What is the best design change?

Accepted Answer

Use a higher-cardinality partition key that distributes writes across partitions. Using a partition key based solely on the current date creates a 'hot partition' because all writes for that day target the same partition, leading to throttling. A higher-cardinality partition key (e.g., combining date with a unique attribute like user ID or order ID) distributes write traffic evenly across multiple partitions, allowing DynamoDB to utilize its full throughput capacity and eliminating throttling.

Answer

Create a global secondary index with the same date key

Answer

Reduce the table's write capacity

Answer

Move the table to S3 Glacier Instant Retrieval

Question 17

Based on the exhibit, a media rendering job runs on a single EC2 instance and writes a large working set of metadata to block storage. The workload performs sustained random reads and writes and must keep latency consistently low for the entire run. The instance may be stopped and started between jobs, and the data must persist. Which storage choice best meets the requirements?

Accepted Answer

Provisioned IOPS SSD EBS volume (io2).. The workload requires sustained low-latency random reads and writes to block storage, and the data must persist across instance stop/start cycles. Provisioned IOPS SSD EBS volumes (io2) are block-level storage designed for high-performance, low-latency workloads with consistent IOPS, and they persist independently of the EC2 instance lifecycle.

Answer

Amazon S3 with multipart uploads because it provides durable object storage and high throughput.

Answer

Amazon EFS because it can be mounted by EC2 and supports persistent file access.

Answer

Amazon FSx for Windows File Server because it offers durable storage and low latency.

Question 18

A latency-sensitive telemetry service uses a custom TCP protocol on EC2 instances in private subnets. The service must preserve the client source IP for rate limiting, avoid HTTP header inspection, and keep per-request overhead as low as possible. Which changes should the team make? Select three.

Accepted Answer

Use a Network Load Balancer in front of the service.. Option A is correct because a Network Load Balancer (NLB) operates at Layer 4 and preserves the client source IP by default when instances are registered as targets. This allows the telemetry service to use the original IP for rate limiting without requiring HTTP header inspection, which is critical for a custom TCP protocol. NLB also introduces minimal latency and low per-request overhead, making it ideal for latency-sensitive workloads.

Answer

Use an Application Load Balancer because path-based routing improves throughput for binary protocols.

Answer

Expose the service through API Gateway because it supports raw TCP and UDP pass-through.

Question 19

A nightly video rendering pipeline runs on Linux EC2 instances and is compatible with ARM64. The jobs are CPU-bound, checkpoint frequently, and can resume if interrupted. The business wants the best throughput per dollar for the batch window. Which two changes should the team make? Select two.

Accepted Answer

Use AWS Graviton-based instances for the render workers.. AWS Graviton-based instances use ARM64 architecture, which is explicitly compatible with the video rendering pipeline. They offer up to 40% better price-performance compared to comparable x86 instances for CPU-bound workloads, directly improving throughput per dollar. This makes option A correct for maximizing cost efficiency.

Answer

Use a single large x86 instance with On-Demand pricing to avoid interruptions.

Answer

Replace the batch workers with a Lambda function to eliminate instance management.

Answer

Move the workload to a spread placement group to increase cost efficiency.

Question 20

A product catalog system uses a relational database for orders and a simple key-value profile store for shopping carts. Traffic is unpredictable, and the company wants to avoid paying for large idle database instances. Which two choices are best? Select two.

Accepted Answer

Use Aurora Serverless v2 for the relational order system.. Aurora Serverless v2 automatically scales compute and memory capacity based on application demand, making it ideal for unpredictable traffic. It eliminates the need to provision for peak load, reducing costs by scaling to zero when idle. This matches the requirement to avoid paying for large idle database instances.

Answer

Keep both workloads on large provisioned RDS instances and add read replicas for the cart store.

Answer

Use DynamoDB provisioned capacity with a fixed minimum despite the unpredictable traffic.

Answer

Replace the relational order system with a wide-column table to reduce SQL licensing.