220-1201 Practice Exam 52 — 20 Questions

Question 1

A customer reports that their multifunction printer (MFP) is not scanning to email. The MFP is connected to the network via Ethernet, and other network functions like printing work fine. What is the most likely cause of this issue?

Accepted Answer

The SMTP server settings are incorrect.. Scan to email requires the MFP to communicate with an SMTP server to send the email. Incorrect SMTP server settings are a common misconfiguration that prevents this function while other network services remain operational.

Answer

The MFP is out of toner.

Answer

The network cable is loose.

Answer

The scanner glass is dirty.

Question 2

A small office has a multifunction device that prints, scans, and faxes. Users report that incoming faxes are not being received, but outgoing faxes work. The MFP is connected to a VoIP phone system. What is the most likely issue?

Accepted Answer

The VoIP system is not configured for T.38 fax protocol.. VoIP systems often use codecs that compress audio, which can interfere with fax tones. The T.38 protocol is designed to transmit faxes over IP networks reliably. Without it, incoming faxes may fail while outgoing faxes might still work if the MFP negotiates differently.

Answer

The fax line is plugged into the wrong port on the MFP.

Answer

The MFP's fax memory is full.

Answer

The MFP's firmware is outdated.

Question 3

A technician is setting up a new multifunction printer for a department. The device supports duplex printing, but the driver installation wizard does not show the duplex option. Users need to print on both sides of the paper. What should the technician do first?

Accepted Answer

Check if the duplex unit is installed and properly connected.. The duplex unit is often a separate accessory that must be physically installed and enabled in the driver. The most logical first step is to verify the hardware is present and properly connected, as the driver may not detect it automatically.

Answer

Update the printer firmware to the latest version.

Answer

Reinstall the printer driver using the manufacturer's full driver package.

Answer

Configure the duplex setting in the printer's web interface.

Question 4

A user complains that when they scan a document to a network folder from the MFP, the scanned file is saved as a blank image. The MFP is configured to scan to a shared folder on a Windows server. What is the most likely cause?

Accepted Answer

The scanner needs to be recalibrated.. A blank scanned image typically indicates the scanner is not capturing data, often due to a calibration or sensor issue. The MFP's scanner calibration can drift over time, leading to all-white scans even though the scanning process appears to run.

Answer

The network folder is full.

Answer

The scan resolution is set too low.

Answer

The network cable is faulty.

Question 5

A technician is configuring an MFP for a law firm that requires secure printing. Users must enter a PIN at the device to release their print jobs. The MFP supports hard drive encryption and secure print release. Which feature should the technician enable to ensure print jobs are not stored unencrypted on the MFP's hard drive?

Accepted Answer

Hard drive encryption. Secure print release only holds jobs until the user enters a PIN, but the data may still be stored on the hard drive. Hard drive encryption ensures that even if the drive is removed, the data is unreadable. Both features together provide comprehensive security.

Answer

Secure Print (PIN release)

Answer

IPsec for network printing

Answer

User authentication via LDAP

Question 6

A user reports that their MFP is making a loud grinding noise when printing, and the output pages have vertical streaks. The MFP is a laser printer with a separate toner cartridge and imaging drum. What is the most likely cause?

Accepted Answer

The imaging drum is damaged or worn.. Vertical streaks on laser printer output often indicate a damaged or worn imaging drum. The grinding noise suggests a mechanical issue with the drum rotation, which is a common failure point in laser MFPs.

Answer

The toner cartridge is low on toner.

Answer

The fuser unit is failing.

Answer

The paper tray is misaligned.

Question 7

A small business uses an MFP that also functions as a network scanner. Users can scan to a shared folder on a Windows PC, but some users get an 'Access Denied' error when scanning. Other users can scan successfully. What is the most likely cause?

Accepted Answer

The MFP's scan-to-folder credentials do not have write permissions to the shared folder.. Scan to folder requires the MFP to have write permissions to the shared folder. If the MFP uses a generic service account, that account must have appropriate NTFS and share permissions. The issue is likely permission-related for the MFP's credentials.

Answer

The network switch port is faulty.

Answer

The MFP's firmware is outdated.

Answer

The Windows firewall is blocking the MFP.

Question 8

A technician is deploying an MFP that supports both USB and network connectivity. The office wants all users on the network to be able to print and scan from the device. Which connection method should the technician use?

Accepted Answer

Ethernet connection to the network switch. Network connectivity (Ethernet or Wi-Fi) allows multiple users to access the MFP simultaneously, while USB is limited to a single directly connected computer. For shared access in an office, network is required.

Answer

USB connection to a single workstation

Answer

Bluetooth connection to each user's device

Answer

Parallel port connection to a print server

Question 9

A user reports that when they send a print job to the MFP, the job appears in the print queue but never prints. Other users can print without issues. The MFP is connected via Ethernet. What is the most likely cause?

Accepted Answer

The user's print spooler service is hung or corrupted.. A print job stuck in the queue but not printing for one user often indicates a driver or spooler issue specific to that user's workstation. Corrupted print spooler files or incorrect driver settings can cause this, while the MFP itself and network are fine.

Answer

The MFP is out of paper.

Answer

The network cable is unplugged from the MFP.

Answer

The MFP's toner cartridge is empty.

Question 10

A technician is configuring an MFP for a healthcare clinic that must comply with HIPAA. The MFP has a built-in hard drive that stores scanned documents. The clinic wants to ensure that once a document is scanned and transmitted, it cannot be recovered from the MFP's drive. What feature should the technician enable?

Accepted Answer

Secure erase after transmission. Secure erase (or data overwrite) is a feature that overwrites the hard drive with patterns of data to prevent recovery. This is critical for compliance in environments like healthcare where patient data must be protected after use.

Answer

User authentication with PIN

Answer

Secure print release

Answer

Hard drive encryption

Question 11

A user reports that when they scan a document to email from the office multifunction printer, the email never arrives. The printer shows a 'Connection to SMTP server failed' error. What is the most likely cause?

Accepted Answer

The SMTP server address or port is configured incorrectly.. This question tests knowledge of scan-to-email configuration. The SMTP server address or authentication credentials are the most common issues when a multifunction device cannot send email. Checking the SMTP settings in the printer's network configuration should resolve the problem.

Answer

The printer's IP address is set to static.

Answer

The toner cartridge is low.

Answer

The printer is out of paper.

Question 12

A small office has a multifunction printer that supports duplex printing. Users complain that when they select 'Print on Both Sides' from their application, the printer still prints single-sided. The printer driver is installed correctly. What should you check first?

Accepted Answer

Check the printer driver's default duplex setting and change it to 'Print on Both Sides'.. This scenario tests understanding of printer driver settings vs. application settings. Duplex printing must be enabled in both the printer driver properties and the application's print dialog. The driver default setting often overrides application choices if not set properly.

Answer

Ensure the printer has enough paper in the tray.

Answer

Replace the network cable.

Answer

Update the printer firmware to the latest version.

Question 13

During a printer installation, the setup wizard asks for the printer's IP address. The multifunction device is connected via Ethernet and has a static IP. Where can you find the IP address on the printer itself?

Accepted Answer

By pressing the 'Home' button, then navigating to 'Network Settings' or 'Information'.. This question tests basic printer configuration knowledge. Most multifunction printers have a control panel menu that displays network settings, including the IP address. Alternatively, printing a configuration page from the printer's menu will show the IP.

Answer

On the back of the printer near the Ethernet port.

Answer

By looking at the toner cartridge label.

Answer

By checking the DHCP server logs on the network.

Question 14

A user reports that the multifunction printer is producing copies with a faint vertical line running down the entire page. The line appears in the same position on every copy, but printed documents from a PC do not have the line. What is the most likely cause?

Accepted Answer

The scanner glass or scanning strip has a scratch or debris.. This question differentiates between scanner and printer issues. Since the line appears only on copies (scan then print) and not on PC prints, the problem is in the scanner assembly. A dirty or scratched scanner glass or a stuck debris on the scanning element causes consistent vertical lines.

Answer

The toner cartridge is defective and needs replacement.

Answer

The printer's fuser unit is damaged.

Answer

The network cable is faulty.

Question 15

A law office wants to enable secure printing on their multifunction device so that users must enter a PIN at the printer before their documents print. The printer supports this feature. What must be configured to make this work?

Accepted Answer

Configure user authentication and PIN codes in the printer's settings.. Secure printing requires user authentication at the device. The printer must have user accounts or a PIN code system configured, and users must select 'Secure Print' or 'Hold Print' from the driver. The printer then releases the job only after the correct PIN is entered.

Answer

Enable SNMP on the printer.

Answer

Install a print server on the network.

Answer

Update the printer driver to the latest version.

Question 16

A user tries to scan a document to a network folder from the multifunction printer, but receives 'Access Denied' error. The printer has been configured with the folder path and credentials. What is the most likely issue?

Accepted Answer

The user account used for scanning does not have write permissions to the folder.. Scan-to-network-folder requires the printer to have write permissions to the shared folder. Even if the path is correct, the credentials used must have 'Write' or 'Modify' permissions on that folder. This is a common misconfiguration.

Answer

The printer's IP address has changed.

Answer

The network folder share name has a typo.

Answer

The printer's hard drive is full.

Question 17

A company's multifunction printer supports faxing over VoIP. Users report that faxes are frequently incomplete or fail to send. The fax line is connected to an analog telephone adapter (ATA). What should you check first?

Accepted Answer

Check the ATA's configuration to ensure T.38 fax relay is enabled.. Fax over VoIP is sensitive to jitter and latency. The ATA's settings for fax passthrough (T.38) must be enabled and properly configured. Without T.38, fax data may be corrupted by voice codecs.

Answer

Replace the fax modem card in the printer.

Answer

Increase the printer's print resolution.

Answer

Disable the printer's firewall.

Question 18

An office manager wants to restrict color printing on the multifunction printer to only certain users to save costs. The printer supports user authentication. What is the best way to implement this?

Accepted Answer

Enable user authentication on the printer and assign color printing permissions only to authorized users.. Printer-based access control requires user authentication and role-based permissions. The correct approach is to create user accounts on the printer, assign permissions to color printing only to authorized users, and require authentication before printing. This ensures only authorized users can print in color.

Answer

Remove the color toner cartridges and only install black.

Answer

Configure the printer driver to default to black and white.

Answer

Set up a print server with group policies to block color jobs.

Question 19

A user scans a document to a USB drive attached to the multifunction printer, but the file is saved as a TIFF image instead of a searchable PDF. The user needs the text to be selectable. What should the technician do?

Accepted Answer

Enable OCR in the printer's scan settings and select 'Searchable PDF' as the output format.. To create a searchable PDF, the printer must perform Optical Character Recognition (OCR) on the scanned image. This requires the printer to have an OCR feature enabled and the scan settings to be set to 'PDF with searchable text' or 'OCR PDF'. TIFF is a raw image format without text layer.

Answer

Change the scan file format to JPEG.

Answer

Increase the scan resolution to 1200 DPI.

Answer

Save the file to a network folder instead of USB.

Question 20

A multifunction printer is connected to a network via Ethernet and also has a USB port for direct printing. A user plugs a USB flash drive into the printer to print a PDF, but the printer does not recognize the drive. The drive works on other computers. What is the most likely cause?

Accepted Answer

The USB flash drive is formatted as NTFS, which the printer does not support.. Multifunction printers often have limitations on USB drive compatibility. The most common issues are the file system format (e.g., exFAT vs. FAT32) or the drive's power draw. Many printers only support FAT32 formatted drives, and some USB 3.0 drives may not be recognized due to power or protocol differences.

Answer

The PDF file is password-protected.

Answer

The printer's USB port is only for service use.

Answer

The printer's IP address is conflicting with another device.