C_S4EWM Extended Warehouse Management Practice Question
You are configuring a putaway process in SAP S/4HANA EWM. The warehouse uses a fixed bin strategy for a particular product, but you also want to allow mixed storage of different batches in the same bin. Which setting must you configure to ensure that the system permits mixed batches in a storage bin while still using the fixed bin for the product?
⚠ Common exam trap
The trap here is assuming that mixed storage is controlled at the bin level, when in fact it is typically controlled at the storage type level, and that fixed bin is set at the storage type level rather than the product master.
Answer choices
Why each option matters
Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.
Correct answer & explanation
✓
In the product master, maintain the 'Fixed Bin' indicator for the product and storage type, and in the storage type configuration, set the 'Mixed Storage' indicator to 'Allowed for Batches'.
To permit mixed batches in a fixed bin, you must configure the fixed bin indicator in the product master for the specific storage type, and set the mixed storage indicator to 'Allowed for Batches' in the storage type configuration. The fixed bin indicator ensures that the system always uses the designated bin for that product, while the mixed storage setting at the storage type level allows different batches to be stored together. This combination is essential to meet the requirement. Other options either misplace the settings or omit critical configuration steps.
Answer analysis
Option-by-option breakdown
For each option: why learners choose it and why it is or isn't the right answer here.
- ✓
In the product master, maintain the 'Fixed Bin' indicator for the product and storage type, and in the storage type configuration, set the 'Mixed Storage' indicator to 'Allowed for Batches'.
Why this is correct
This is the correct configuration. The fixed bin indicator is maintained in the product master (often in the warehouse product master under storage type data). The mixed storage setting for batches is configured at the storage type level. By setting the fixed bin in the product master, the system will always propose the fixed bin for putaway. Allowing mixed batches at the storage type level ensures that different batches of the same product can be stored in the same bin. This combination satisfies the requirement.
- ✗
In the storage bin master record, set the 'Mixed Storage' indicator to 'Allowed' and assign the bin as a fixed bin for the product in the product master.
Why it's wrong here
Setting mixed storage in the bin master allows mixing of different products or batches, but it does not by itself enforce the fixed bin strategy. The fixed bin assignment is done in the product master or via storage bin determination. However, the question asks for the setting to permit mixed batches while using a fixed bin. The critical setting is not in the bin master but in the product master or storage type configuration. This option is partially correct but incomplete because it misses the necessary configuration in the product master or storage type.
- ✗
In the storage type configuration, set the 'Putaway Strategy' to 'Fixed Bin' and in the storage bin master, set the 'Mixed Storage' indicator to 'Allowed for Batches'.
Why it's wrong here
This option combines the fixed bin strategy at the storage type level with mixed storage for batches in the bin master. However, the fixed bin strategy is not set at the storage type level but rather per product via the product master or via a special putaway strategy. The storage type putaway strategy would be 'Fixed Bin' only if it is defined as such, but typically fixed bin is a product-level setting. Moreover, mixed storage for batches is often controlled at the storage type level, not the bin level. This option is incorrect because it misplaces the configuration settings.
- ✗
In the product master, set the 'Batch Management' indicator and in the storage type configuration, set the 'Mixed Storage' indicator to 'Allowed for Batches'.
Why it's wrong here
This option addresses batch management and mixed storage at the storage type level. While it allows mixed batches in a storage type, it does not specifically enable a fixed bin strategy. The fixed bin is typically defined in the product master or via a putaway strategy. Therefore, this option does not fully satisfy the requirement. It is incorrect because it omits the fixed bin assignment and might not be the exact setting needed for fixed bin with mixed batches.
About these practice questions
Courseiva writes every C_S4EWM question from scratch — 217 in total, each with an explanation and a wrong-answer breakdown. None are copied from real exams or dumps. Learn why practice questions differ from exam dumps →
JA
Written and reviewed by Johnson Ajibi, MSc IT Security
Senior Network & Security Engineer · founder of Courseiva
Last reviewed September 2026 · checked against the official SAP exam blueprint
This C_S4EWM practice question is part of Courseiva's free SAP certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the C_S4EWM exam.