- A
Loss of HA keepalive on both sides
If keepalives are lost, each firewall assumes the other is dead and becomes active.
- B
License expiration on one firewall
Why wrong: License expiration does not cause active/active.
- C
Session synchronization failure
Why wrong: Session sync failure does not affect HA state.
- D
Configuration mismatch between peers
Why wrong: Configuration mismatch does not cause active/active state.
- E
HA1 link failure
If HA1 fails, firewalls cannot exchange heartbeats and may both become active.
Question 84 of 516
PCNSE Practice Question: Managing Troubleshooting and High Availability
This PCNSE practice question tests your understanding of managing troubleshooting and high availability. Read the scenario carefully and evaluate each option against the stated constraints before committing to an answer. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.
Which TWO conditions can cause an HA pair to enter an 'active/active' state? (Choose two.)
Answer choices
Why each option matters
Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.
Correct answer & explanation
✓
Loss of HA keepalive on both sides
A is correct because when both firewalls lose the HA keepalive (sent over HA1 link), each firewall assumes the peer is dead and transitions to active state to ensure traffic continuity. This is a fail-safe mechanism: without keepalive, each unit independently becomes active, resulting in an active/active condition that can cause duplicate IP addresses and traffic loops.
Key principle: Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option.
Answer analysis
Option-by-option breakdown
For each option: why learners choose it and why it is or isn't the right answer here.
- ✓
Loss of HA keepalive on both sides
Why this is correct
If keepalives are lost, each firewall assumes the other is dead and becomes active.
Related concept
Read the scenario before looking for a memorised answer.
- ✗
License expiration on one firewall
Why it's wrong here
License expiration does not cause active/active.
- ✗
Session synchronization failure
Why it's wrong here
Session sync failure does not affect HA state.
- ✗
Configuration mismatch between peers
Why it's wrong here
Configuration mismatch does not cause active/active state.
- ✓
HA1 link failure
Why this is correct
If HA1 fails, firewalls cannot exchange heartbeats and may both become active.
Related concept
Read the scenario before looking for a memorised answer.
Common exam traps
Common exam trap: answer the scenario, not the keyword
The trap here is that candidates often think only a complete HA1 link failure (option E) causes active/active, but they overlook that loss of keepalive on both sides (option A) is the underlying mechanism—and both conditions are correct because HA1 link failure directly causes loss of keepalive on both sides.
Detailed technical explanation
How to think about this question
The HA keepalive is sent every 1 second (default) over the HA1 link using UDP port 2925; if three consecutive keepalives are missed (3-second hold timer), the peer is considered dead. In active/passive mode, the passive firewall transitions to active only if it detects the active peer is unreachable, but if both lose keepalive simultaneously (e.g., HA1 link failure), each firewall independently becomes active. This is why redundant HA1 links (HA1 backup) are critical in production to avoid split-brain scenarios.
KKey Concepts to Remember
- Read the scenario before looking for a memorised answer.
- Find the constraint that changes the correct option.
- Eliminate answers that are true in general but not in this case.
TExam Day Tips
- Watch for words such as best, first, most likely and least administrative effort.
- Review why wrong options are wrong, not only why the correct option is correct.
Key takeaway
Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option.
Real-world example
How this comes up in practice
A practitioner preparing for the PCNSE exam encounters this exact type of scenario on the job. The correct answer here is not the most general option — it is the best answer for the specific constraint described. Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option. Real exam questions reward reading the full scenario before eliminating options, because the constraint defines which answer fits.
What to study next
Got this wrong? Here's your next step.
Identify which exam domain this question belongs to, review the core concept, then practise similar questions from the same domain.
- →
Managing Troubleshooting and High Availability — study guide chapter
Learn the concepts, then practise the questions
- →
Managing Troubleshooting and High Availability practice questions
Targeted practice on this topic area only
- →
All PCNSE questions
516 questions across all exam domains
- →
Palo Alto Networks Certified Network Security Engineer PCNSE study guide
Full concept coverage aligned to exam objectives
- →
PCNSE practice test guide
How to use practice tests most effectively before exam day
Related practice questions
Related PCNSE practice-question pages
Use these pages to review the topic behind this question. This is how one missed question becomes focused revision.
Manage, Monitor and Operate practice questions
Practise PCNSE questions linked to Manage, Monitor and Operate.
Securing Traffic and App-ID practice questions
Practise PCNSE questions linked to Securing Traffic and App-ID.
Securing Users and Applications with Authentication practice questions
Practise PCNSE questions linked to Securing Users and Applications with Authentication.
Decryption and SSL Inspection practice questions
Practise PCNSE questions linked to Decryption and SSL Inspection.
Managing Troubleshooting and High Availability practice questions
Practise PCNSE questions linked to Managing Troubleshooting and High Availability.
Deploy and Configure Firewalls practice questions
Practise PCNSE questions linked to Deploy and Configure Firewalls.
Core Concepts and Architecture practice questions
Practise PCNSE questions linked to Core Concepts and Architecture.
Secure Access and VPN practice questions
Practise PCNSE questions linked to Secure Access and VPN.
Troubleshoot practice questions
Practise PCNSE questions linked to Troubleshoot.
PCNSE fundamentals practice questions
Practise PCNSE questions linked to PCNSE fundamentals.
PCNSE scenario practice questions
Practise PCNSE questions linked to PCNSE scenario.
PCNSE troubleshooting practice questions
Practise PCNSE questions linked to PCNSE troubleshooting.
Practice this exam
Start a free PCNSE practice session
Short sessions build daily habit. Longer sessions build exam-day stamina. Try a timed session to simulate real conditions.
FAQ
Questions learners often ask
What does this PCNSE question test?
Managing Troubleshooting and High Availability — This question tests Managing Troubleshooting and High Availability — Read the scenario before looking for a memorised answer..
What is the correct answer to this question?
The correct answer is: Loss of HA keepalive on both sides — A is correct because when both firewalls lose the HA keepalive (sent over HA1 link), each firewall assumes the peer is dead and transitions to active state to ensure traffic continuity. This is a fail-safe mechanism: without keepalive, each unit independently becomes active, resulting in an active/active condition that can cause duplicate IP addresses and traffic loops.
What should I do if I get this PCNSE question wrong?
Identify which exam domain this question belongs to, review the core concept, then practise similar questions from the same domain.
What is the key concept behind this question?
Read the scenario before looking for a memorised answer.
About these practice questions
Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →
Keep practising
More PCNSE practice questions
- Arrange the steps to enable and configure GlobalProtect on a Palo Alto Networks firewall.
- Order the steps to upgrade the PAN-OS software on a standalone firewall.
- An administrator notices that traffic from zone A to zone B is being dropped silently. Security rules are in place. Trou…
- Which component of the PAN-OS architecture is responsible for processing security policies and performing packet inspect…
- A company has configured a security policy that allows HTTP traffic from the internal network 10.0.0.0/8 to the internet…
- An organization wants to map user identity from Active Directory for traffic coming from internal LAN users without inst…
Last reviewed: Jun 11, 2026
This PCNSE practice question is part of Courseiva's free Palo Alto Networks certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the PCNSE exam.
Question Discussion
Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.
Sign in to join the discussion.