PCNSA Managing Objects Practice Question
A network security administrator needs to create an address object that represents a range of IP addresses from 10.1.1.10 to 10.1.1.20. Which address object type should be used?
⚠ Common exam trap
The trap here is assuming that an IP Netmask object can represent any contiguous range, but it can only represent subnets that align to network boundaries.
Answer choices
Why each option matters
Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.
Correct answer & explanation
✓
IP Range
The requirement is to represent a specific range of IP addresses from 10.1.1.10 to 10.1.1.20. PAN-OS provides an address object type called IP Range that allows defining a start and end IP address. This type is designed exactly for such scenarios, enabling efficient policy management without needing to list each address individually or use a subnet that might include unwanted addresses.
Answer analysis
Option-by-option breakdown
For each option: why learners choose it and why it is or isn't the right answer here.
- ✗
FQDN
Why it's wrong here
An FQDN address object resolves a fully qualified domain name to IP addresses. It is not suitable for defining a static range of IP addresses because it relies on DNS resolution and does not allow specifying a start and end IP. This object type is used when the IP addresses may change dynamically based on DNS.
- ✗
Dynamic
Why it's wrong here
A dynamic address object is a member of a Dynamic Address Group and is populated based on tags. It does not allow manual specification of an IP range; instead, it is used for environments where IP addresses change frequently and are registered via tags. This does not meet the requirement of a fixed range.
- ✗
IP Netmask
Why it's wrong here
An IP Netmask object is used to define a subnet using a network address and a subnet mask, for example 10.1.1.0/24. It cannot represent an arbitrary range like 10.1.1.10 to 10.1.1.20 because that range does not align to a single subnet boundary. Therefore, this type would not accurately match only the intended addresses.
- ✓
IP Range
Why this is correct
An IP Range address object allows the administrator to specify a starting and ending IP address, such as 10.1.1.10-10.1.1.20. This is the correct choice because it exactly represents the contiguous range needed, and PAN-OS supports this type for both IPv4 and IPv6. Using an IP Range object simplifies policy management by treating the entire range as a single entity.
Visual reference
Go deeper
Related to this question
About these practice questions
This PCNSA question is part of Courseiva's 385-question bank — original exam-style content with full explanations and wrong-answer analysis, never real exam questions or exam dumps. Learn why practice questions differ from exam dumps →
JA
Written and reviewed by Johnson Ajibi, MSc IT Security
Senior Network & Security Engineer · founder of Courseiva
Last reviewed September 2026 · checked against the official Palo Alto Networks exam blueprint
This PCNSA practice question is part of Courseiva's free Palo Alto Networks certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the PCNSA exam.