- A
Upgrade to Premium Block Blob storage.
Why wrong: Provides consistent low latency but is expensive and does not provide global edge caching.
- B
Enable Azure CDN or Azure Front Door with caching rules.
Caches content at edge locations globally, reducing latency.
- C
Enable read-access geo-redundant storage (RA-GRS).
Why wrong: Provides secondary read endpoint but only in one other region, not global edge caching.
- D
Use Azure Front Door with private link to the storage account.
Combines global load balancing, caching, and secure private access.
- E
Use Blob Storage lifecycle management to delete blobs after reading.
Why wrong: Does not reduce latency; deletion is for cost management.
AZ-204 Develop for Azure storage Practice Question
This AZ-204 practice question tests your understanding of develop for azure storage. Match the stated requirement to the specific cloud service, access model, or configuration option — many options are valid in isolation but not for this scenario. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.
A healthcare application stores patient diagnostic images in Azure Blob Storage. The images are accessed by radiologists worldwide. You need to reduce latency for image retrieval while maintaining security and compliance. Which TWO actions should you take?
Answer choices
Why each option matters
Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.
Correct answer & explanation
Enable Azure CDN or Azure Front Door with caching rules.
Options A and D are correct. Enabling Azure CDN or Azure Front Door caches content at edge locations, reducing latency. Geo-redundant storage provides replication to another region, but does not reduce latency for read access unless read-access is enabled (RA-GRS). Option B (RA-GRS) provides a secondary read endpoint, but does not improve latency for all users globally. Option C incorrectly suggests deleting the blob after reading. Option E (Premium tier) improves performance but is costly and not specifically for global latency reduction.
Key principle: NAT direction and interface roles matter as much as the IP address mapping. Inside/outside designation controls which traffic is translated.
Answer analysis
Option-by-option breakdown
For each option: why learners choose it and why it is or isn't the right answer here.
- ✗
Upgrade to Premium Block Blob storage.
Why it's wrong here
Provides consistent low latency but is expensive and does not provide global edge caching.
- ✓
Enable Azure CDN or Azure Front Door with caching rules.
Why this is correct
Caches content at edge locations globally, reducing latency.
Related concept
Static NAT maps one inside address to one outside address.
- ✗
Enable read-access geo-redundant storage (RA-GRS).
Why it's wrong here
Provides secondary read endpoint but only in one other region, not global edge caching.
- ✓
Use Azure Front Door with private link to the storage account.
Why this is correct
Combines global load balancing, caching, and secure private access.
Related concept
Static NAT maps one inside address to one outside address.
- ✗
Use Blob Storage lifecycle management to delete blobs after reading.
Why it's wrong here
Does not reduce latency; deletion is for cost management.
Common exam traps
Common exam trap: NAT rules depend on direction and matching traffic
NAT is not only about the public address. The inside/outside interface roles and the ACL or rule that matches traffic are just as important.
Detailed technical explanation
How to think about this question
NAT questions usually test address translation, overload/PAT behaviour, static mappings and whether the right traffic is being translated. Read the interface direction and address terms carefully.
KKey Concepts to Remember
- Static NAT maps one inside address to one outside address.
- PAT allows many inside hosts to share one public address using ports.
- Inside local and inside global describe the private and translated addresses.
- NAT ACLs identify traffic for translation, not always security filtering.
TExam Day Tips
- Identify inside and outside interfaces first.
- Check whether the scenario needs static NAT, dynamic NAT or PAT.
- Do not confuse NAT matching ACLs with normal packet-filtering intent.
Key takeaway
NAT direction and interface roles matter as much as the IP address mapping. Inside/outside designation controls which traffic is translated.
Real-world example
How this comes up in practice
A startup's cloud architect reviews their monthly bill and notices costs are higher than expected for a long-running batch job. Switching from on-demand instances to Reserved Instances — or using Spot/Preemptible VMs — can reduce compute costs by up to 72 %. Questions like this test whether you understand the tradeoffs between commitment, flexibility, and cost across cloud pricing models.
What to study next
Got this wrong? Here's your next step.
Review the four NAT address types (inside local, inside global, outside local, outside global), PAT port overload, and static vs dynamic NAT use cases. Then practise related AZ-204 NAT questions on configuration and troubleshooting.
- →
Develop for Azure storage — study guide chapter
Learn the concepts, then practise the questions
- →
Develop for Azure storage practice questions
Targeted practice on this topic area only
- →
All AZ-204 questions
997 questions across all exam domains
- →
Microsoft Azure Developer Associate AZ-204 study guide
Full concept coverage aligned to exam objectives
- →
AZ-204 practice test guide
How to use practice tests most effectively before exam day
Related practice questions
Related AZ-204 practice-question pages
Use these pages to review the topic behind this question. This is how one missed question becomes focused revision.
Develop Azure compute solutions practice questions
Practise AZ-204 questions linked to Develop Azure compute solutions.
Develop for Azure storage practice questions
Practise AZ-204 questions linked to Develop for Azure storage.
Implement Azure security practice questions
Practise AZ-204 questions linked to Implement Azure security.
Connect to and consume Azure services and third-party services practice questions
Practise AZ-204 questions linked to Connect to and consume Azure services and third-party services.
Monitor, troubleshoot, and optimize Azure solutions practice questions
Practise AZ-204 questions linked to Monitor, troubleshoot, and optimize Azure solutions.
AZ-204 fundamentals practice questions
Practise AZ-204 questions linked to AZ-204 fundamentals.
AZ-204 scenario practice questions
Practise AZ-204 questions linked to AZ-204 scenario.
AZ-204 troubleshooting practice questions
Practise AZ-204 questions linked to AZ-204 troubleshooting.
Practice this exam
Start a free AZ-204 practice session
Short sessions build daily habit. Longer sessions build exam-day stamina. Try a timed session to simulate real conditions.
FAQ
Questions learners often ask
What does this AZ-204 question test?
Develop for Azure storage — This question tests Develop for Azure storage — Static NAT maps one inside address to one outside address..
What is the correct answer to this question?
The correct answer is: Enable Azure CDN or Azure Front Door with caching rules. — Options A and D are correct. Enabling Azure CDN or Azure Front Door caches content at edge locations, reducing latency. Geo-redundant storage provides replication to another region, but does not reduce latency for read access unless read-access is enabled (RA-GRS). Option B (RA-GRS) provides a secondary read endpoint, but does not improve latency for all users globally. Option C incorrectly suggests deleting the blob after reading. Option E (Premium tier) improves performance but is costly and not specifically for global latency reduction.
What should I do if I get this AZ-204 question wrong?
Review the four NAT address types (inside local, inside global, outside local, outside global), PAT port overload, and static vs dynamic NAT use cases. Then practise related AZ-204 NAT questions on configuration and troubleshooting.
What is the key concept behind this question?
Static NAT maps one inside address to one outside address.
About these practice questions
Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →
Last reviewed: Jun 21, 2026
This AZ-204 practice question is part of Courseiva's free Microsoft certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the AZ-204 exam.
Question Discussion
Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.
Sign in to join the discussion.