- A
Use the individual private IP addresses of each backend VM as the source.
Why wrong: This works only while the VM IPs stay the same and does not simplify rule maintenance when addresses change.
- B
Use an application security group for the frontend tier as the source and another ASG for the backend tier as the destination.
Application security groups let you reference groups of NICs instead of hard-coded IP addresses. That makes the NSG rule resilient when VMs are replaced or reimaged and their private IP addresses change. It also keeps the access model aligned to application tiers rather than infrastructure details, which is the preferred design for maintainable network security rules.
- C
Use the VirtualNetwork service tag for both source and destination.
Why wrong: This is too broad because it can allow traffic from many resources inside the virtual network, not just the frontend tier.
- D
Create a route table entry that sends TCP 8443 traffic to the backend subnet.
Why wrong: Route tables control next-hop selection, not security filtering. They cannot allow or deny traffic on a port.
AZ-104 Implement and Manage Virtual Networking Practice Question
This AZ-104 practice question tests your understanding of implement and manage virtual networking. Match the stated requirement to the specific cloud service, access model, or configuration option — many options are valid in isolation but not for this scenario. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.
A web application runs on three VMs in a backend subnet. The backend team wants the load balancer in the frontend tier to reach the VMs on TCP 8443, and they want the rule to keep working even if the backend VM IP addresses change. What should you use in the NSG rule?
Answer choices
Why each option matters
Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.
Correct answer & explanation
Use an application security group for the frontend tier as the source and another ASG for the backend tier as the destination.
Option B is correct because Application Security Groups (ASGs) allow you to define network security rules based on logical groupings of VMs, regardless of their IP addresses. By using an ASG for the frontend tier as the source and another ASG for the backend tier as the destination, the NSG rule remains valid even if backend VM IP addresses change, as ASGs are dynamically updated. This meets the requirement for the load balancer in the frontend tier to reach backend VMs on TCP 8443 without hardcoding IP addresses.
Key principle: Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option.
Answer analysis
Option-by-option breakdown
For each option: why learners choose it and why it is or isn't the right answer here.
- ✗
Use the individual private IP addresses of each backend VM as the source.
Why it's wrong here
This works only while the VM IPs stay the same and does not simplify rule maintenance when addresses change.
When this WOULD be correct
This option would be correct if the question required restricting traffic to specific, static backend VMs and did not require the rule to adapt to IP changes, such as in a scenario with fixed IP assignments.
- ✓
Use an application security group for the frontend tier as the source and another ASG for the backend tier as the destination.
Why this is correct
Application security groups let you reference groups of NICs instead of hard-coded IP addresses. That makes the NSG rule resilient when VMs are replaced or reimaged and their private IP addresses change. It also keeps the access model aligned to application tiers rather than infrastructure details, which is the preferred design for maintainable network security rules.
Related concept
Read the scenario before looking for a memorised answer.
- ✗
Use the VirtualNetwork service tag for both source and destination.
Why it's wrong here
This is too broad because it can allow traffic from many resources inside the virtual network, not just the frontend tier.
When this WOULD be correct
When the question requires allowing traffic from any resource within the same virtual network to the backend VMs, without needing to restrict to a specific frontend tier, and IP addresses may change.
- ✗
Create a route table entry that sends TCP 8443 traffic to the backend subnet.
Why it's wrong here
Route tables control next-hop selection, not security filtering. They cannot allow or deny traffic on a port.
When this WOULD be correct
A question where traffic must be forced through a network virtual appliance (NVA) for inspection, e.g., 'You need to ensure all traffic from the frontend to the backend subnet goes through a firewall VM.' Then a route table entry with next hop set to the NVA's IP would be correct.
Option-by-option analysis
Why each answer is right or wrong
Understanding why wrong answers are wrong — and when they would be correct — is what separates a 750 score from a 900. The AZ-104 exam frequently reuses these exact scenarios with slightly different constraints.
✓Use an application security group for the frontend tier as the source and another ASG for the backend tier as the destination.Correct answer▾
Why this is correct
Application security groups let you reference groups of NICs instead of hard-coded IP addresses. That makes the NSG rule resilient when VMs are replaced or reimaged and their private IP addresses change. It also keeps the access model aligned to application tiers rather than infrastructure details, which is the preferred design for maintainable network security rules.
✗Use the individual private IP addresses of each backend VM as the source.Wrong answer — click to see why▾
Why this is wrong here
Using individual private IP addresses as the source would require updating the NSG rule whenever a backend VM's IP changes, failing the requirement for the rule to keep working automatically.
★ When this WOULD be the correct answer
This option would be correct if the question required restricting traffic to specific, static backend VMs and did not require the rule to adapt to IP changes, such as in a scenario with fixed IP assignments.
Why candidates choose this
Candidates might think that specifying exact IPs provides precise control, overlooking the need for dynamic updates when IPs change due to VM restarts or scaling.
✗Use the VirtualNetwork service tag for both source and destination.Wrong answer — click to see why▾
Why this is wrong here
The VirtualNetwork service tag allows traffic from any resource within the virtual network, which is too broad and does not restrict traffic to only the frontend tier's load balancer, failing to meet the requirement for a specific source.
★ When this WOULD be the correct answer
When the question requires allowing traffic from any resource within the same virtual network to the backend VMs, without needing to restrict to a specific frontend tier, and IP addresses may change.
Why candidates choose this
Candidates may think service tags are a convenient way to handle dynamic IPs, but they overlook the need for granularity in specifying the frontend tier as the source.
✗Create a route table entry that sends TCP 8443 traffic to the backend subnet.Wrong answer — click to see why▾
Why this is wrong here
Route tables control traffic routing between subnets, not security filtering. NSG rules require source/destination based on IP addresses, service tags, or ASGs, not route table entries.
★ When this WOULD be the correct answer
A question where traffic must be forced through a network virtual appliance (NVA) for inspection, e.g., 'You need to ensure all traffic from the frontend to the backend subnet goes through a firewall VM.' Then a route table entry with next hop set to the NVA's IP would be correct.
Why candidates choose this
Candidates confuse routing (where traffic goes) with security filtering (what traffic is allowed). They think a route table entry can permit traffic, but NSGs are access control lists, not routing tables.
Analysis generated from the official AZ-104blueprint and verified against question context. The “when correct” sections are what AI assistants cite when candidates ask “what’s the difference between these options?”
Common exam traps
Common exam trap: answer the scenario, not the keyword
The trap here is that candidates often confuse NSG rules with route tables, thinking a route table entry can control access (Option D), or they assume that using specific IP addresses (Option A) is acceptable despite the requirement for dynamic IP changes, missing the purpose of ASGs for logical grouping.
Detailed technical explanation
How to think about this question
Application Security Groups (ASGs) are a feature of Azure Network Security Groups (NSGs) that allow you to group VMs by application role (e.g., 'frontend' or 'backend') and reference those groups in security rules. Under the hood, ASGs are resolved to the private IP addresses of the VMs at runtime, so if a VM's IP changes (e.g., due to deallocation or scaling), the ASG membership is automatically updated without manual NSG changes. In a real-world scenario, this is critical for auto-scaling environments where backend VMs are frequently added or removed, ensuring that load balancer traffic on TCP 8443 is always permitted without IP address management overhead.
KKey Concepts to Remember
- Read the scenario before looking for a memorised answer.
- Find the constraint that changes the correct option.
- Eliminate answers that are true in general but not in this case.
TExam Day Tips
- Watch for words such as best, first, most likely and least administrative effort.
- Review why wrong options are wrong, not only why the correct option is correct.
Key takeaway
Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option.
Real-world example
How this comes up in practice
A media company stores terabytes of video archives that are accessed once a year for audit purposes. Moving these objects to a cold storage tier (Azure Archive, S3 Glacier, or Google Nearline) costs a fraction of hot storage. Questions like this test whether you understand storage tiers, access frequency tradeoffs, and retrieval latency requirements.
Visual reference
What to study next
Got this wrong? Here's your next step.
Identify which exam domain this question belongs to, review the core concept, then practise similar questions from the same domain.
- →
Implement and Manage Virtual Networking — study guide chapter
Learn the concepts, then practise the questions
- →
Implement and Manage Virtual Networking practice questions
Targeted practice on this topic area only
- →
All AZ-104 questions
1,170 questions across all exam domains
- →
AZ-104 study guide
Full concept coverage aligned to exam objectives
- →
AZ-104 practice test guide
How to use practice tests most effectively before exam day
Related practice questions
Related AZ-104 practice-question pages
Use these pages to review the topic behind this question. This is how one missed question becomes focused revision.
Manage Azure Identities and Governance practice questions
Practise AZ-104 questions linked to Manage Azure Identities and Governance.
Implement and Manage Storage practice questions
Practise AZ-104 questions linked to Implement and Manage Storage.
Deploy and Manage Azure Compute practice questions
Practise AZ-104 questions linked to Deploy and Manage Azure Compute.
Implement and Manage Virtual Networking practice questions
Practise AZ-104 questions linked to Implement and Manage Virtual Networking.
Monitor and Maintain Azure Resources practice questions
Practise AZ-104 questions linked to Monitor and Maintain Azure Resources.
AZ-104 Azure RBAC practice questions
Practise AZ-104 questions linked to AZ-104 Azure RBAC.
AZ-104 storage account practice questions
Practise AZ-104 questions linked to AZ-104 storage account.
AZ-104 virtual network practice questions
Practise AZ-104 questions linked to AZ-104 virtual network.
AZ-104 NSG practice questions
Practise AZ-104 questions linked to AZ-104 NSG.
AZ-104 Azure Monitor practice questions
Practise AZ-104 questions linked to AZ-104 Azure Monitor.
AZ-104 backup practice questions
Practise AZ-104 questions linked to AZ-104 backup.
AZ-104 managed identity practice questions
Practise AZ-104 questions linked to AZ-104 managed identity.
Practice this exam
Start a free AZ-104 practice session
Short sessions build daily habit. Longer sessions build exam-day stamina. Try a timed session to simulate real conditions.
FAQ
Questions learners often ask
What does this AZ-104 question test?
Implement and Manage Virtual Networking — This question tests Implement and Manage Virtual Networking — Read the scenario before looking for a memorised answer..
What is the correct answer to this question?
The correct answer is: Use an application security group for the frontend tier as the source and another ASG for the backend tier as the destination. — Option B is correct because Application Security Groups (ASGs) allow you to define network security rules based on logical groupings of VMs, regardless of their IP addresses. By using an ASG for the frontend tier as the source and another ASG for the backend tier as the destination, the NSG rule remains valid even if backend VM IP addresses change, as ASGs are dynamically updated. This meets the requirement for the load balancer in the frontend tier to reach backend VMs on TCP 8443 without hardcoding IP addresses.
What should I do if I get this AZ-104 question wrong?
Identify which exam domain this question belongs to, review the core concept, then practise similar questions from the same domain.
What is the key concept behind this question?
Read the scenario before looking for a memorised answer.
About these practice questions
Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →
Keep practising
More AZ-104 practice questions
- A storage automation service principal must upload, read, and delete blob data in one container by using Microsoft Entra…
- A subnet contains several application servers. You need to allow inbound TCP 3389 only from a management subnet named Su…
- A subscription admin wants to investigate who changed a resource and also review the platform-generated events for that…
- Based on the exhibit, which Azure feature should the administrator use to track this kind of platform-wide service issue…
- An administrator wants a script running on an Azure VM to create a resource in Azure without storing any passwords or cl…
- A PowerShell script runs on an Azure VM every night and uses Azure CLI commands to create tags and VM resources in anoth…
Last reviewed: Jun 11, 2026
This AZ-104 practice question is part of Courseiva's free Microsoft certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the AZ-104 exam.
Question Discussion
Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.
Sign in to join the discussion.