- A
The next-hop 10.0.0.1 is not reachable.
A static route is only installed if the next-hop is reachable via an active route.
- B
The static route has a higher preference than an existing dynamic route.
Why wrong: Static routes have a default preference of 5, which is lower than most dynamic routes, so they would be preferred.
- C
The configuration was not committed.
Why wrong: If not committed, the route would not appear, but a commit would be required; the question implies it was configured but not shown.
- D
The prefix 192.168.2.0/24 already exists in the forwarding table.
Why wrong: A different route to the same prefix would cause the route to be hidden, but the issue is likely next-hop reachability.
JNCIA-JUNOS Routing Fundamentals Practice Question
This JNCIA-JUNOS practice question tests your understanding of routing fundamentals. Examine the command output carefully: the correct answer depends on what the output actually shows, not on general recall alone. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.
An administrator configures a static route to 192.168.2.0/24 with next-hop 10.0.0.1. The route does not appear in the routing table. What is the most likely cause?
Clue words in this question
Noticing these words before you look at the options changes how you read each choice.
Clue:
"most likely"Why it matters: Probability qualifier — the question wants the most probable cause or outcome, not a guaranteed one. Eliminate low-probability options.
Answer choices
Why each option matters
Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.
Correct answer & explanation
The next-hop 10.0.0.1 is not reachable.
The correct answer is B. A static route requires a reachable next-hop to be installed. If the next-hop is not reachable (e.g., no active route to 10.0.0.1), the route is hidden. Option A is incorrect because static routes have a low preference (5) and would override dynamic routes. Option C is incorrect because a commit would show an error if the configuration failed. Option D is incorrect because the route would be hidden, not in the forwarding table.
Key principle: Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option.
Answer analysis
Option-by-option breakdown
For each option: why learners choose it and why it is or isn't the right answer here.
- ✓
The next-hop 10.0.0.1 is not reachable.
Why this is correct
A static route is only installed if the next-hop is reachable via an active route.
Clue confirmation
The clue word "most likely" in the question point toward this answer.
Related concept
Read the scenario before looking for a memorised answer.
- ✗
The static route has a higher preference than an existing dynamic route.
Why it's wrong here
Static routes have a default preference of 5, which is lower than most dynamic routes, so they would be preferred.
- ✗
The configuration was not committed.
Why it's wrong here
If not committed, the route would not appear, but a commit would be required; the question implies it was configured but not shown.
- ✗
The prefix 192.168.2.0/24 already exists in the forwarding table.
Why it's wrong here
A different route to the same prefix would cause the route to be hidden, but the issue is likely next-hop reachability.
Common exam traps
Common exam trap: answer the scenario, not the keyword
Many certification questions include familiar terms but test a specific constraint. Read the exact wording before choosing an answer that is generally true but wrong for this case.
Trap categories for this question
Command / output trap
If not committed, the route would not appear, but a commit would be required; the question implies it was configured but not shown.
Detailed technical explanation
How to think about this question
This question should be treated as a scenario, not a definition check. Identify the problem, the constraint and the best action. Then compare each option against those facts.
KKey Concepts to Remember
- Read the scenario before looking for a memorised answer.
- Find the constraint that changes the correct option.
- Eliminate answers that are true in general but not in this case.
- Use explanations to understand the rule behind the answer.
TExam Day Tips
- Underline the problem statement mentally.
- Watch for words such as best, first, most likely and least administrative effort.
- Review why wrong options are wrong, not only why the correct option is correct.
Key takeaway
Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option.
Real-world example
How this comes up in practice
A practitioner preparing for the JNCIA-JUNOS exam encounters this exact type of scenario on the job. The correct answer here is not the most general option — it is the best answer for the specific constraint described. Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option. Real exam questions reward reading the full scenario before eliminating options, because the constraint defines which answer fits.
What to study next
Got this wrong? Here's your next step.
Identify which JNCIA-JUNOS exam domain this question belongs to, then review the specific concept being tested. Practise related questions in that domain and focus on understanding why each wrong answer is tempting — not just why the correct answer is right.
- →
Routing Fundamentals — study guide chapter
Learn the concepts, then practise the questions
- →
Routing Fundamentals practice questions
Targeted practice on this topic area only
- →
All JNCIA-JUNOS questions
514 questions across all exam domains
- →
Juniper Networks Certified Associate Junos JNCIA-Junos study guide
Full concept coverage aligned to exam objectives
- →
JNCIA-JUNOS practice test guide
How to use practice tests most effectively before exam day
Related practice questions
Related JNCIA-JUNOS practice-question pages
Use these pages to review the topic behind this question. This is how one missed question becomes focused revision.
User Interfaces practice questions
Practise JNCIA-JUNOS questions linked to User Interfaces.
Junos Configuration Basics practice questions
Practise JNCIA-JUNOS questions linked to Junos Configuration Basics.
Operational Monitoring and Maintenance practice questions
Practise JNCIA-JUNOS questions linked to Operational Monitoring and Maintenance.
Routing Fundamentals practice questions
Practise JNCIA-JUNOS questions linked to Routing Fundamentals.
Networking Fundamentals practice questions
Practise JNCIA-JUNOS questions linked to Networking Fundamentals.
Junos OS Fundamentals practice questions
Practise JNCIA-JUNOS questions linked to Junos OS Fundamentals.
JNCIA-JUNOS fundamentals practice questions
Practise JNCIA-JUNOS questions linked to JNCIA-JUNOS fundamentals.
JNCIA-JUNOS scenario practice questions
Practise JNCIA-JUNOS questions linked to JNCIA-JUNOS scenario.
JNCIA-JUNOS troubleshooting practice questions
Practise JNCIA-JUNOS questions linked to JNCIA-JUNOS troubleshooting.
Practice this exam
Start a free JNCIA-JUNOS practice session
Short sessions build daily habit. Longer sessions build exam-day stamina. Try a timed session to simulate real conditions.
FAQ
Questions learners often ask
What does this JNCIA-JUNOS question test?
Routing Fundamentals — This question tests Routing Fundamentals — Read the scenario before looking for a memorised answer..
What is the correct answer to this question?
The correct answer is: The next-hop 10.0.0.1 is not reachable. — The correct answer is B. A static route requires a reachable next-hop to be installed. If the next-hop is not reachable (e.g., no active route to 10.0.0.1), the route is hidden. Option A is incorrect because static routes have a low preference (5) and would override dynamic routes. Option C is incorrect because a commit would show an error if the configuration failed. Option D is incorrect because the route would be hidden, not in the forwarding table.
What should I do if I get this JNCIA-JUNOS question wrong?
Identify which JNCIA-JUNOS exam domain this question belongs to, then review the specific concept being tested. Practise related questions in that domain and focus on understanding why each wrong answer is tempting — not just why the correct answer is right.
Are there clue words in this question I should notice?
Yes — watch for: "most likely". Probability qualifier — the question wants the most probable cause or outcome, not a guaranteed one. Eliminate low-probability options.
What is the key concept behind this question?
Read the scenario before looking for a memorised answer.
About these practice questions
Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →
Last reviewed: Jun 24, 2026
This JNCIA-JUNOS practice question is part of Courseiva's free Juniper Networks certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the JNCIA-JUNOS exam.
Question Discussion
Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.
Sign in to join the discussion.