JNCIA-JUNOS Routing Fundamentals Practice Question
This JNCIA-JUNOS practice question tests your understanding of routing fundamentals. Read the scenario carefully and evaluate each option against the stated constraints before committing to an answer. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.
A Juniper device receives several routes to the same destination prefix from different routing protocols. Which parameter is used first to select the active route?
Clue words in this question
Noticing these words before you look at the options changes how you read each choice.
Clue: "first"
Why it matters: Order matters here. You are being tested on which action comes before the others — not which action is generally useful.
Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.
Correct answer & explanation
✓
Route preference (administrative distance)
Option C is correct because route preference (administrative distance) is compared first when routes are from different protocols. Options A and B are BGP-specific and used after preference. Option D is used within the same protocol only.
Key principle: NAT direction and interface roles matter as much as the IP address mapping. Inside/outside designation controls which traffic is translated.
Answer analysis
Option-by-option breakdown
For each option: why learners choose it and why it is or isn't the right answer here.
✓
Route preference (administrative distance)
Why this is correct
Route preference is the primary tie-breaker for routes from different protocols.
Clue confirmation
The clue word "first" in the question point toward this answer.
Related concept
Static NAT maps one inside address to one outside address.
✗
Metric
Why it's wrong here
Metric is only compared within the same routing protocol.
✗
AS path length
Why it's wrong here
AS path length is a BGP attribute and is compared after route preference.
✗
Local preference
Why it's wrong here
Local preference is a BGP attribute and is not used in first-level route selection across protocols.
Common exam traps
Common exam trap: NAT rules depend on direction and matching traffic
NAT is not only about the public address. The inside/outside interface roles and the ACL or rule that matches traffic are just as important.
Detailed technical explanation
How to think about this question
NAT questions usually test address translation, overload/PAT behaviour, static mappings and whether the right traffic is being translated. Read the interface direction and address terms carefully.
KKey Concepts to Remember
Static NAT maps one inside address to one outside address.
PAT allows many inside hosts to share one public address using ports.
Inside local and inside global describe the private and translated addresses.
NAT ACLs identify traffic for translation, not always security filtering.
TExam Day Tips
→Identify inside and outside interfaces first.
→Check whether the scenario needs static NAT, dynamic NAT or PAT.
→Do not confuse NAT matching ACLs with normal packet-filtering intent.
Key takeaway
NAT direction and interface roles matter as much as the IP address mapping. Inside/outside designation controls which traffic is translated.
Real-world example
How this comes up in practice
A small business has 20 workstations on the 192.168.1.0/24 network and one public IP from its ISP. The router uses PAT (NAT overload) so all 20 devices share one public address using different source ports. NAT questions test whether you understand the four address terms and which direction each translation applies.
What to study next
Got this wrong? Here's your next step.
Review the four NAT address types (inside local, inside global, outside local, outside global), PAT port overload, and static vs dynamic NAT use cases. Then practise related JNCIA-JUNOS NAT questions on configuration and troubleshooting.
Routing Fundamentals — This question tests Routing Fundamentals — Static NAT maps one inside address to one outside address..
What is the correct answer to this question?
The correct answer is: Route preference (administrative distance) — Option C is correct because route preference (administrative distance) is compared first when routes are from different protocols. Options A and B are BGP-specific and used after preference. Option D is used within the same protocol only.
What should I do if I get this JNCIA-JUNOS question wrong?
Review the four NAT address types (inside local, inside global, outside local, outside global), PAT port overload, and static vs dynamic NAT use cases. Then practise related JNCIA-JUNOS NAT questions on configuration and troubleshooting.
Are there clue words in this question I should notice?
Yes — watch for: "first". Order matters here. You are being tested on which action comes before the others — not which action is generally useful.
What is the key concept behind this question?
Static NAT maps one inside address to one outside address.
About these practice questions
Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →
Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.
This JNCIA-JUNOS practice question is part of Courseiva's free Juniper Networks certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the JNCIA-JUNOS exam.
Question Discussion
Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.
Sign in to join the discussion.