Question 35 of 514
Networking FundamentalsmediumMultiple SelectObjective-mapped

Quick Answer

The correct answer identifies 127.0.0.1 as the loopback address and 169.254.0.0/16 as the link-local range. The loopback address, 127.0.0.1, is a reserved IPv4 address used by a host to send traffic to itself for testing network stack functionality, while the 169.254.0.0/16 block is designated for Automatic Private IP Addressing (APIPA) when a device fails to obtain a DHCP lease. On the JNCIA-Junos exam, these IPv4 addressing concepts test your ability to distinguish between loopback, link-local, and private address ranges—a common trap is confusing 169.254.0.0/16 (link-local) with private ranges like 192.168.0.0/16 or 10.0.0.0/8. Remember that private addresses are routable within a local network, but link-local addresses are never routed. A useful memory tip: think of 127.0.0.1 as “home” for self-testing, and 169.254.x.x as “last resort” when DHCP fails.

JNCIA-JUNOS Networking Fundamentals Practice Question

This JNCIA-JUNOS practice question tests your understanding of networking fundamentals. Match the stated requirement to the specific cloud service, access model, or configuration option — many options are valid in isolation but not for this scenario. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.

Which TWO statements about IPv4 addressing are correct?

Question 1mediummulti select
Full question →

Answer choices

Why each option matters

Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.

Correct answer & explanation

The network 169.254.0.0/16 is used for link-local addressing.

Options A and B are correct. 127.0.0.1 is the loopback address, and 169.254.0.0/16 is used for link-local addressing (APIPA). Option C is false because 192.168.0.0/16 is a private address. Option D is false because 10.0.0.0/8 is private. Option E is false because a /24 subnet mask provides 254 usable host addresses, not 256.

Key principle: Count usable hosts — not total addresses — and remember that the network and broadcast addresses are not available to hosts in standard IPv4 subnets.

Answer analysis

Option-by-option breakdown

For each option: why learners choose it and why it is or isn't the right answer here.

  • A /24 subnet mask provides 256 usable host addresses.

    Why it's wrong here

    Incorrect. A /24 subnet provides 256 total addresses, but only 254 are usable (network and broadcast addresses are reserved).

  • The network 169.254.0.0/16 is used for link-local addressing.

    Why this is correct

    Correct. This range is automatically assigned when no DHCP server is available.

    Related concept

    CIDR notation defines the prefix length.

  • The address 192.168.0.0/16 is a public address.

    Why it's wrong here

    Incorrect. 192.168.0.0/16 is a private address range per RFC 1918.

  • The address 10.0.0.0/8 is a public address.

    Why it's wrong here

    Incorrect. 10.0.0.0/8 is a private address range.

  • The address 127.0.0.1 is a loopback address.

    Why this is correct

    Correct. 127.0.0.0/8 is reserved for loopback, with 127.0.0.1 commonly used.

    Related concept

    CIDR notation defines the prefix length.

Common exam traps

Common exam trap: usable hosts are not the same as total addresses

Subnetting questions often tempt you into counting all addresses. In normal IPv4 subnets, the network and broadcast addresses are not usable host addresses.

Detailed technical explanation

How to think about this question

Subnetting questions test whether you can identify the network, broadcast address, usable range, mask and correct subnet. Slow down enough to calculate the block size correctly.

KKey Concepts to Remember

  • CIDR notation defines the prefix length.
  • Block size helps identify subnet boundaries.
  • Network and broadcast addresses are not usable hosts in normal IPv4 subnets.
  • The required host count determines the smallest suitable subnet.

TExam Day Tips

  • Write the block size before choosing the subnet.
  • Check whether the question asks for hosts, subnets or a specific address range.
  • Do not confuse /24, /25, /26 and /27 host counts.

Key takeaway

Count usable hosts — not total addresses — and remember that the network and broadcast addresses are not available to hosts in standard IPv4 subnets.

Real-world example

How this comes up in practice

A network engineer segments a warehouse floor into three subnets: 20 scanners, 5 printers, and 2 management hosts. Picking the wrong mask wastes addresses or leaves too few usable hosts. Exam questions test whether you can apply CIDR notation, calculate block size, and identify the correct usable-host range for a given prefix.

What to study next

Got this wrong? Here's your next step.

Review block sizes, usable host formulas (2^n − 2), and how to find network and broadcast addresses for /24 through /30. Then practise related JNCIA-JUNOS subnetting questions on CIDR, address ranges, and subnet selection.

Related practice questions

Related JNCIA-JUNOS practice-question pages

Use these pages to review the topic behind this question. This is how one missed question becomes focused revision.

Practice this exam

Start a free JNCIA-JUNOS practice session

Short sessions build daily habit. Longer sessions build exam-day stamina. Try a timed session to simulate real conditions.

FAQ

Questions learners often ask

What does this JNCIA-JUNOS question test?

Networking Fundamentals — This question tests Networking Fundamentals — CIDR notation defines the prefix length..

What is the correct answer to this question?

The correct answer is: The network 169.254.0.0/16 is used for link-local addressing. — Options A and B are correct. 127.0.0.1 is the loopback address, and 169.254.0.0/16 is used for link-local addressing (APIPA). Option C is false because 192.168.0.0/16 is a private address. Option D is false because 10.0.0.0/8 is private. Option E is false because a /24 subnet mask provides 254 usable host addresses, not 256.

What should I do if I get this JNCIA-JUNOS question wrong?

Review block sizes, usable host formulas (2^n − 2), and how to find network and broadcast addresses for /24 through /30. Then practise related JNCIA-JUNOS subnetting questions on CIDR, address ranges, and subnet selection.

What is the key concept behind this question?

CIDR notation defines the prefix length.

About these practice questions

Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →

How Courseiva writes practice questions · Editorial policy

Keep practising

More JNCIA-JUNOS practice questions

Last reviewed: Jun 24, 2026

Question Discussion

Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.

Loading comments…

Sign in to join the discussion.

This JNCIA-JUNOS practice question is part of Courseiva's free Juniper Networks certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the JNCIA-JUNOS exam.