Question 477 of 500
Configuring network securityhardMultiple SelectObjective-mapped

Quick Answer

The answer is egress VPC firewall rules, Cloud NAT, and routing through a firewall appliance. To restrict outbound traffic to specific IPs, egress firewall rules define which destination IP ranges are permitted, while Cloud NAT allows instances without public IPs to reach the internet through a managed translation service. However, because VPC firewall rules alone cannot inspect traffic or enforce granular policies like protocol filtering, you must configure custom routes to direct outbound traffic through a firewall appliance, which performs deep packet inspection and enforces the allowed IP list. On the Google Professional Cloud Security Engineer exam, this scenario tests your understanding of how to combine network-level controls—firewall rules, NAT, and routing—to achieve secure egress, with a common trap being that Cloud NAT alone does not restrict destinations; it only provides connectivity. Remember the mnemonic “FNR” for Firewall, NAT, Routing: without all three, your outbound restriction is incomplete.

PCSE Configuring network security Practice Question

This PCSE practice question tests your understanding of configuring network security. This is a configuration task: choose the command set that satisfies every stated requirement. Small differences — like 'secret' vs 'password' or 'transport input ssh' vs 'all' — change whether the answer is correct. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.

A security engineer needs to restrict outbound traffic from a VPC to only allow specific external IP ranges. Which three components must be configured? (Choose three.)

Question 1hardmulti select
Full question →

Answer choices

Why each option matters

Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.

Correct answer & explanation

Cloud NAT

To restrict outbound traffic, you need egress firewall rules (B). If instances have no public IP, they need Cloud NAT for internet access (A). To enforce granular filtering, traffic must be routed through a firewall appliance (D).

Key principle: NAT direction and interface roles matter as much as the IP address mapping. Inside/outside designation controls which traffic is translated.

Answer analysis

Option-by-option breakdown

For each option: why learners choose it and why it is or isn't the right answer here.

  • Cloud NAT

    Why this is correct

    Required for private instances to reach the internet.

    Related concept

    Static NAT maps one inside address to one outside address.

  • Private Google Access

    Why it's wrong here

    Allows access to Google APIs privately, not for general external IPs.

  • Routes with next hop to a firewall instance

    Why this is correct

    Forces traffic through a firewall for inspection and filtering.

    Related concept

    Static NAT maps one inside address to one outside address.

  • Firewall rules on the instance OS

    Why it's wrong here

    Instance-level firewall rules are not managed by GCP and are outside the scope of VPC network configuration.

  • VPC firewall rules (egress)

    Why this is correct

    Egress rules control what destinations instances can reach.

    Related concept

    Static NAT maps one inside address to one outside address.

Common exam traps

Common exam trap: NAT rules depend on direction and matching traffic

NAT is not only about the public address. The inside/outside interface roles and the ACL or rule that matches traffic are just as important.

Detailed technical explanation

How to think about this question

NAT questions usually test address translation, overload/PAT behaviour, static mappings and whether the right traffic is being translated. Read the interface direction and address terms carefully.

KKey Concepts to Remember

  • Static NAT maps one inside address to one outside address.
  • PAT allows many inside hosts to share one public address using ports.
  • Inside local and inside global describe the private and translated addresses.
  • NAT ACLs identify traffic for translation, not always security filtering.

TExam Day Tips

  • Identify inside and outside interfaces first.
  • Check whether the scenario needs static NAT, dynamic NAT or PAT.
  • Do not confuse NAT matching ACLs with normal packet-filtering intent.

Key takeaway

NAT direction and interface roles matter as much as the IP address mapping. Inside/outside designation controls which traffic is translated.

Real-world example

How this comes up in practice

A company's IT admin needs to give a contractor read-only access to production logs without sharing account credentials. Using role-based access control (RBAC) and temporary scoped permissions — not a permanent shared password — is the correct pattern. Questions like this test whether you can apply least-privilege access across cloud identity services.

What to study next

Got this wrong? Here's your next step.

Review the four NAT address types (inside local, inside global, outside local, outside global), PAT port overload, and static vs dynamic NAT use cases. Then practise related PCSE NAT questions on configuration and troubleshooting.

Related practice questions

Related PCSE practice-question pages

Use these pages to review the topic behind this question. This is how one missed question becomes focused revision.

Practice this exam

Start a free PCSE practice session

Short sessions build daily habit. Longer sessions build exam-day stamina. Try a timed session to simulate real conditions.

FAQ

Questions learners often ask

What does this PCSE question test?

Configuring network security — This question tests Configuring network security — Static NAT maps one inside address to one outside address..

What is the correct answer to this question?

The correct answer is: Cloud NAT — To restrict outbound traffic, you need egress firewall rules (B). If instances have no public IP, they need Cloud NAT for internet access (A). To enforce granular filtering, traffic must be routed through a firewall appliance (D).

What should I do if I get this PCSE question wrong?

Review the four NAT address types (inside local, inside global, outside local, outside global), PAT port overload, and static vs dynamic NAT use cases. Then practise related PCSE NAT questions on configuration and troubleshooting.

What is the key concept behind this question?

Static NAT maps one inside address to one outside address.

About these practice questions

Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →

How Courseiva writes practice questions · Editorial policy

Last reviewed: Jun 24, 2026

Question Discussion

Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.

Loading comments…

Sign in to join the discussion.

This PCSE practice question is part of Courseiva's free Google Cloud certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the PCSE exam.