Question 365 of 2,152

Network Logging and Syslog →mediumMultiple ChoiceObjective-mapped

Syslog Logging Destinations

This 300-410 practice question tests your understanding of network logging and syslog. This is a configuration task: choose the command set that satisfies every stated requirement. Small differences — like 'secret' vs 'password' or 'transport input ssh' vs 'all' — change whether the answer is correct. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.

Examine the following partial router configuration:

logging buffered 16384
logging console warnings
logging monitor notifications
logging trap debugging
logging source-interface Loopback0
logging 192.168.1.100

What is the effect of this configuration?

A
Syslog messages of severity 0 through 7 are sent to the server 192.168.1.100.
The 'logging trap debugging' command sets the syslog trap level to debugging, which includes all severities (0-7).
B
Only syslog messages of severity 0 through 4 are sent to the server 192.168.1.100.
Why wrong: The trap level is 'debugging', not 'warnings'. The console level is set to warnings, but that does not affect the syslog server.
C
The syslog server receives messages with the IP address of the outgoing interface as the source.
Why wrong: The 'logging source-interface Loopback0' overrides the source IP to be the Loopback0 address, not the outgoing interface.
D
The logging buffer stores up to 16384 syslog messages.
Why wrong: The buffer size is 16384 bytes, not messages. The number of messages depends on their size.

Full breakdown with real-world context →

Quick Answer

The answer is that syslog messages of severity 0 through 7 are sent to the server 192.168.1.100. This occurs because the `logging trap debugging` command sets the severity threshold for the syslog server destination to level 7 (debugging), which includes all lower-numbered, more critical severities from 0 (emergencies) up through 7 (debugging). In contrast, the console is limited to warnings (severity 4) and the monitor to notifications (severity 5), demonstrating how configuring syslog logging destinations with severity thresholds allows granular control over which messages reach each output. On the Cisco CCNP ENARSI 300-410 exam, this tests your understanding of the logging hierarchy and the trap keyword, which is often confused with the debugging level—a common trap is assuming `logging trap debugging` only sends debug messages, when it actually sends everything. A reliable memory tip is to remember that the trap level sets the ceiling: the higher the severity number you configure, the more messages you include, so debugging (7) is the widest net.

Answer choices

Why each option matters

Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.

Correct answer & explanation

✓

Syslog messages of severity 0 through 7 are sent to the server 192.168.1.100.

This configuration sets up logging with different severity levels for different destinations. The 'logging trap debugging' sends all messages (severity 0-7) to the syslog server at 192.168.1.100, while console gets only warnings (severity 4) and monitor gets notifications (severity 5). The buffer is set to 16384 bytes.

Key principle: Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option.

Answer analysis

Option-by-option breakdown

For each option: why learners choose it and why it is or isn't the right answer here.

✓
Syslog messages of severity 0 through 7 are sent to the server 192.168.1.100.
Why this is correct
The 'logging trap debugging' command sets the syslog trap level to debugging, which includes all severities (0-7).
Related concept
Read the scenario before looking for a memorised answer.
✗
Only syslog messages of severity 0 through 4 are sent to the server 192.168.1.100.
Why it's wrong here
The trap level is 'debugging', not 'warnings'. The console level is set to warnings, but that does not affect the syslog server.
✗
The syslog server receives messages with the IP address of the outgoing interface as the source.
Why it's wrong here
The 'logging source-interface Loopback0' overrides the source IP to be the Loopback0 address, not the outgoing interface.
✗
The logging buffer stores up to 16384 syslog messages.
Why it's wrong here
The buffer size is 16384 bytes, not messages. The number of messages depends on their size.

Common exam traps

Common exam trap: answer the scenario, not the keyword

Many certification questions include familiar terms but test a specific constraint. Read the exact wording before choosing an answer that is generally true but wrong for this case.

Detailed technical explanation

How to think about this question

This question should be treated as a scenario, not a definition check. Identify the problem, the constraint and the best action. Then compare each option against those facts.

KKey Concepts to Remember

Read the scenario before looking for a memorised answer.
Find the constraint that changes the correct option.
Eliminate answers that are true in general but not in this case.
Use explanations to understand the rule behind the answer.

TExam Day Tips

Underline the problem statement mentally.
Watch for words such as best, first, most likely and least administrative effort.
Review why wrong options are wrong, not only why the correct option is correct.

Key takeaway

Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option.

Real-world example

How this comes up in practice

A practitioner preparing for the 300-410 exam encounters this exact type of scenario on the job. The correct answer here is not the most general option — it is the best answer for the specific constraint described. Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option. Real exam questions reward reading the full scenario before eliminating options, because the constraint defines which answer fits.

What to study next

Got this wrong? Here's your next step.

Identify which 300-410 exam domain this question belongs to, then review the specific concept being tested. Practise related questions in that domain and focus on understanding why each wrong answer is tempting — not just why the correct answer is right.

Related 300-410 practice-question pages

Use these pages to review the topic behind this question. This is how one missed question becomes focused revision.

Layer 3 Technologies practice questions

Practise 300-410 questions linked to Layer 3 Technologies.

EIGRP Troubleshooting practice questions

Practise 300-410 questions linked to EIGRP Troubleshooting.

OSPF Troubleshooting (v2/v3) practice questions

Practise 300-410 questions linked to OSPF Troubleshooting (v2/v3).

BGP Troubleshooting practice questions

Practise 300-410 questions linked to BGP Troubleshooting.

Route Redistribution practice questions

Practise 300-410 questions linked to Route Redistribution.

Policy-Based Routing (PBR) practice questions

Practise 300-410 questions linked to Policy-Based Routing (PBR).

VRF-Lite practice questions

Practise 300-410 questions linked to VRF-Lite.

Route Maps and Route Filtering practice questions

Practise 300-410 questions linked to Route Maps and Route Filtering.

Administrative Distance practice questions

Practise 300-410 questions linked to Administrative Distance.

Route Summarization practice questions

Practise 300-410 questions linked to Route Summarization.

Bidirectional Forwarding Detection (BFD) practice questions

Practise 300-410 questions linked to Bidirectional Forwarding Detection (BFD).

VPN Technologies practice questions

Practise 300-410 questions linked to VPN Technologies.

Practice this exam

Start a free 300-410 practice session

Short sessions build daily habit. Longer sessions build exam-day stamina. Try a timed session to simulate real conditions.

10 questions 20 questions 30 questions 50 questions Timed 30

300-410 practice-test guide →Study guide →Browse all practice tests

FAQ

Questions learners often ask

What does this 300-410 question test?

Network Logging and Syslog — This question tests Network Logging and Syslog — Read the scenario before looking for a memorised answer..

What is the correct answer to this question?

The correct answer is: Syslog messages of severity 0 through 7 are sent to the server 192.168.1.100. — This configuration sets up logging with different severity levels for different destinations. The 'logging trap debugging' sends all messages (severity 0-7) to the syslog server at 192.168.1.100, while console gets only warnings (severity 4) and monitor gets notifications (severity 5). The buffer is set to 16384 bytes.

What should I do if I get this 300-410 question wrong?

What is the key concept behind this question?

Read the scenario before looking for a memorised answer.

About these practice questions

Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →

How Courseiva writes practice questions · Editorial policy

Same concept, more angles

1 more ways this is tested on 300-410

These questions test the same concept from different angles. Work through them to make sure you can recognise it however the exam phrases it.

Variation 1. Given the configuration: logging buffered 8192 warnings logging console alerts logging monitor critical Which of the following is true?

easy

✓ A.The logging buffer stores messages of severity 0 through 4.
B.The console displays messages of severity 0 through 3.
C.The monitor receives messages of severity 0 through 4.
D.The buffer can store up to 8192 syslog messages.

Why A: The buffer is set to 8192 bytes with level warnings (0-4). Console is alerts (0-2). Monitor is critical (0-3). Note that the buffer size is in bytes, not messages.

Keep practising

Question Discussion

Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.

Loading comments…

This 300-410 practice question is part of Courseiva's free Cisco certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the 300-410 exam.