Quick Answer
The answer is an SD-WAN rule. This is the correct configuration object because SD-WAN rules are specifically designed to match traffic based on criteria like source or destination IP addresses and then forward that matched traffic to a particular SD-WAN member or apply a specific strategy, such as lowest latency. In the context of the Fortinet NSE 7 Advanced Security NSE7 exam, this question tests your understanding of how to override the default SD-WAN load-balancing logic for precise traffic steering. A common trap is confusing SD-WAN rules with static routes or policy routes; however, only SD-WAN rules allow you to combine a destination IP match with a specific member selection within the SD-WAN zone. A helpful memory tip is to think of an SD-WAN rule as a "traffic cop" that says, "if the packet's destination IP matches this list, send it exclusively through member X," bypassing all other load-balancing algorithms.
This NSE7 practice question tests your understanding of advanced networking and sd-wan. This is a configuration task: choose the command set that satisfies every stated requirement. Small differences — like 'secret' vs 'password' or 'transport input ssh' vs 'all' — change whether the answer is correct. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.
A FortiGate has two WAN interfaces configured as SD-WAN members. The administrator wants traffic to specific destination IP addresses to use a particular member. Which SD-WAN configuration object should be used to achieve this?
SD-WAN rule
SD-WAN rules define which traffic goes to which member based on matching criteria.
Route map
Why wrong: Route maps are for route redistribution, not SD-WAN forwarding.
Prefix list
Why wrong: Prefix lists match routes, not traffic forwarding decisions.
Performance SLA
Why wrong: Performance SLA defines the thresholds for link quality, not traffic forwarding.
Answer choices
Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.
Correct answer & explanation
SD-WAN rule
SD-WAN rules allow matching traffic based on criteria such as source/destination IP, and then forward it to a specific SD-WAN member or strategy.
Key principle: NAT direction and interface roles matter as much as the IP address mapping. Inside/outside designation controls which traffic is translated.
Answer analysis
For each option: why learners choose it and why it is or isn't the right answer here.
SD-WAN rule
Why this is correct
SD-WAN rules define which traffic goes to which member based on matching criteria.
Related concept
Static NAT maps one inside address to one outside address.
Route map
Why it's wrong here
Route maps are for route redistribution, not SD-WAN forwarding.
Prefix list
Why it's wrong here
Prefix lists match routes, not traffic forwarding decisions.
Performance SLA
Why it's wrong here
Performance SLA defines the thresholds for link quality, not traffic forwarding.
Common exam traps
NAT is not only about the public address. The inside/outside interface roles and the ACL or rule that matches traffic are just as important.
Detailed technical explanation
NAT questions usually test address translation, overload/PAT behaviour, static mappings and whether the right traffic is being translated. Read the interface direction and address terms carefully.
Key takeaway
NAT direction and interface roles matter as much as the IP address mapping. Inside/outside designation controls which traffic is translated.
Real-world example
A small business has 20 workstations on the 192.168.1.0/24 network and one public IP from its ISP. The router uses PAT (NAT overload) so all 20 devices share one public address using different source ports. NAT questions test whether you understand the four address terms and which direction each translation applies.
What to study next
Review the four NAT address types (inside local, inside global, outside local, outside global), PAT port overload, and static vs dynamic NAT use cases. Then practise related NSE7 NAT questions on configuration and troubleshooting.
Advanced Networking and SD-WAN — study guide chapter
Learn the concepts, then practise the questions
Advanced Networking and SD-WAN practice questions
Targeted practice on this topic area only
All NSE7 questions
1,000 questions across all exam domains
Fortinet NSE 7 Advanced Security NSE7 study guide
Full concept coverage aligned to exam objectives
NSE7 practice test guide
How to use practice tests most effectively before exam day
Related practice questions
Use these pages to review the topic behind this question. This is how one missed question becomes focused revision.
Practise NSE7 questions linked to Advanced Networking and SD-WAN.
Practise NSE7 questions linked to Advanced VPN and Zero Trust.
Practise NSE7 questions linked to Enterprise Firewall and VDOMs.
Practise NSE7 questions linked to Advanced Threat Protection.
Practise NSE7 questions linked to Troubleshooting and Diagnostics.
Practise NSE7 questions linked to NSE7 fundamentals.
Practise NSE7 questions linked to NSE7 scenario.
Practise NSE7 questions linked to NSE7 troubleshooting.
Practice this exam
Short sessions build daily habit. Longer sessions build exam-day stamina. Try a timed session to simulate real conditions.
FAQ
Advanced Networking and SD-WAN — This question tests Advanced Networking and SD-WAN — Static NAT maps one inside address to one outside address..
The correct answer is: SD-WAN rule — SD-WAN rules allow matching traffic based on criteria such as source/destination IP, and then forward it to a specific SD-WAN member or strategy.
Review the four NAT address types (inside local, inside global, outside local, outside global), PAT port overload, and static vs dynamic NAT use cases. Then practise related NSE7 NAT questions on configuration and troubleshooting.
Static NAT maps one inside address to one outside address.
About these practice questions
Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →
Last reviewed: Jun 21, 2026
This NSE7 practice question is part of Courseiva's free Fortinet certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the NSE7 exam.
Question Discussion
Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.
Sign in to join the discussion.