Question 1mediummulti select
Full question →Question 104 of 1,000
Quick Answer
The answer is enabling the 'nac-policy' on the switch-facing interface and configuring RADIUS for FortiNAC communication. These two configurations are required because FortiGate acts as a policy enforcement point, using RADIUS to query FortiNAC for device compliance status, while the nac-policy on the interface dictates how non-compliant or unknown devices are handled at the network edge. On the Fortinet NSE 7 Advanced Security NSE7 exam, this question tests your understanding of the FortiGate’s role in a layered NAC architecture—it does not handle 802.1x directly, which is the switch’s job, nor does it use SGT or nac-mode for this integration. A common trap is confusing the switch’s authentication role with the FortiGate’s enforcement role; remember that the FortiGate only needs the RADIUS server connection and the interface-level nac-policy to enforce access decisions. Memory tip: "RADIUS for the query, NAC-policy for the remedy."
NSE7 Advanced VPN and Zero Trust Practice Question
This NSE7 practice question tests your understanding of advanced vpn and zero trust. This is a configuration task: choose the command set that satisfies every stated requirement. Small differences — like 'secret' vs 'password' or 'transport input ssh' vs 'all' — change whether the answer is correct. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.
A FortiGate administrator is configuring NAC (Network Access Control) integration with FortiNAC. The goal is to control access for wired clients based on device compliance. Which TWO configurations are required on the FortiGate to support this integration?
Answer choices
Why each option matters
Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.
Correct answer & explanation
✓
Configure a RADIUS server pointing to FortiNAC.
FortiGate integrates with FortiNAC via RADIUS (B) to query device compliance and NAC policies (A) on the interface to enforce access. 802.1x is typically handled by the switch, not FortiGate directly. SGT and nac-mode are not standard for this integration.
Key principle: Authentication proves identity; authorization controls what that identity can do after login. Both must work for full privileged access.
Common exam traps
Common exam trap: authentication is not authorization
Logging in proves the user can authenticate. It does not automatically mean the user is allowed to enter privileged or configuration mode. Watch for AAA authorization, privilege level and command authorization details.
Detailed technical explanation
How to think about this question
This kind of question is testing the difference between identity and permission. A user may successfully log in to a router because authentication is working, but still fail to enter configuration mode because authorization is missing, misconfigured or mapped to a lower privilege level.
KKey Concepts to Remember
- Authentication checks who the user is.
- Authorization controls what the user is allowed to do after login.
- Privilege levels affect access to EXEC and configuration commands.
- AAA, TACACS+ and RADIUS can separate login success from command access.
TExam Day Tips
- Do not assume successful login means full administrative access.
- Look for words such as cannot enter configuration mode, privilege level, authorization or command access.
- Separate login problems from permission problems before choosing the answer.
Key takeaway
Authentication proves identity; authorization controls what that identity can do after login. Both must work for full privileged access.
Real-world example
How this comes up in practice
A help-desk technician troubleshoots why a newly connected PC cannot reach shared printers on the same floor. The cable is good, the switch port is active, but the PC is in VLAN 20 and the printers are in VLAN 10. The uplink trunk only allows VLAN 10. A trunk being up does not mean every VLAN crosses it.
What to study next
Got this wrong? Here's your next step.
Review Cisco AAA concepts — authentication, authorization, and accounting. Study privilege levels (0–15), command authorization under TACACS+, and how RADIUS differs. Then practise related NSE7 questions on access control and AAA configuration.
- →
Advanced VPN and Zero Trust — study guide chapter
Learn the concepts, then practise the questions
- →
Advanced VPN and Zero Trust practice questions
Targeted practice on this topic area only
- →
All NSE7 questions
1,000 questions across all exam domains
- →
Fortinet NSE 7 Advanced Security NSE7 study guide
Full concept coverage aligned to exam objectives
- →
NSE7 practice test guide
How to use practice tests most effectively before exam day
Related practice questions
Related NSE7 practice-question pages
Use these pages to review the topic behind this question. This is how one missed question becomes focused revision.
Advanced Networking and SD-WAN practice questions
Practise NSE7 questions linked to Advanced Networking and SD-WAN.
Advanced VPN and Zero Trust practice questions
Practise NSE7 questions linked to Advanced VPN and Zero Trust.
Enterprise Firewall and VDOMs practice questions
Practise NSE7 questions linked to Enterprise Firewall and VDOMs.
Advanced Threat Protection practice questions
Practise NSE7 questions linked to Advanced Threat Protection.
Troubleshooting and Diagnostics practice questions
Practise NSE7 questions linked to Troubleshooting and Diagnostics.
NSE7 fundamentals practice questions
Practise NSE7 questions linked to NSE7 fundamentals.
NSE7 scenario practice questions
Practise NSE7 questions linked to NSE7 scenario.
NSE7 troubleshooting practice questions
Practise NSE7 questions linked to NSE7 troubleshooting.
Practice this exam
Start a free NSE7 practice session
Short sessions build daily habit. Longer sessions build exam-day stamina. Try a timed session to simulate real conditions.
FAQ
Questions learners often ask
What does this NSE7 question test?
Advanced VPN and Zero Trust — This question tests Advanced VPN and Zero Trust — Authentication checks who the user is..
What is the correct answer to this question?
The correct answer is: Configure a RADIUS server pointing to FortiNAC. — FortiGate integrates with FortiNAC via RADIUS (B) to query device compliance and NAC policies (A) on the interface to enforce access. 802.1x is typically handled by the switch, not FortiGate directly. SGT and nac-mode are not standard for this integration.
What should I do if I get this NSE7 question wrong?
Review Cisco AAA concepts — authentication, authorization, and accounting. Study privilege levels (0–15), command authorization under TACACS+, and how RADIUS differs. Then practise related NSE7 questions on access control and AAA configuration.
What is the key concept behind this question?
Authentication checks who the user is.
About these practice questions
Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →
Last reviewed: Jun 21, 2026
This NSE7 practice question is part of Courseiva's free Fortinet certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the NSE7 exam.
Question Discussion
Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.
Sign in to join the discussion.