- A
10.0.1.50
Why wrong: 10.0.1.50 is on the 10.0.1.0/24 subnet, not the 10.0.0.0/24 subnet of the router.
- B
10.0.0.0
Why wrong: 10.0.0.0 is the network address and is reserved; it cannot be assigned to a host.
- C
10.0.0.50
10.0.0.50 is within the valid host range of 10.0.0.1 to 10.0.0.254 for the /24 subnet.
- D
10.0.0.255
Why wrong: 10.0.0.255 is the broadcast address for the /24 subnet and cannot be assigned to a host.
Quick Answer
The correct answer is 10.0.0.50, because a /24 subnet mask defines the network as 10.0.0.0 with a usable host range of 10.0.0.1 through 10.0.0.254, and 10.0.0.50 falls squarely within that range without being reserved for the network ID or broadcast address. This concept tests your understanding of subnet boundaries and private IP addressing, a core objective on the CompTIA A+ Core 1 220-1201 exam. A common trap is assuming any address starting with 10 is valid, but the /24 mask strictly limits the valid IP address on a /24 subnet to the last octet between 1 and 254. Remember, the network address (ending in .0) and the broadcast address (ending in .255) are never assignable to a workstation. For a quick memory tip, think “.0 is the network, .255 is the shout, everything in between is what you’re about.”
220-1101 IP Addressing Practice Question
This 220-1201 practice question tests your understanding of ip addressing. Match the stated requirement to the specific cloud service, access model, or configuration option — many options are valid in isolation but not for this scenario. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.
A technician is setting up a small office with 15 devices and needs to assign private IP addresses. The router's LAN interface is 10.0.0.1/24. Which of the following is a valid IP address for a workstation on this network?
Answer choices
Why each option matters
Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.
Correct answer & explanation
10.0.0.50
The /24 subnet means the network is 10.0.0.0 with a range of 10.0.0.1 to 10.0.0.254. 10.0.0.50 falls within this range and is not reserved. This tests understanding of private IP ranges and subnet boundaries.
Key principle: Count usable hosts — not total addresses — and remember that the network and broadcast addresses are not available to hosts in standard IPv4 subnets.
Answer analysis
Option-by-option breakdown
For each option: why learners choose it and why it is or isn't the right answer here.
- ✗
10.0.1.50
Why it's wrong here
10.0.1.50 is on the 10.0.1.0/24 subnet, not the 10.0.0.0/24 subnet of the router.
- ✗
10.0.0.0
Why it's wrong here
10.0.0.0 is the network address and is reserved; it cannot be assigned to a host.
- ✓
10.0.0.50
Why this is correct
10.0.0.50 is within the valid host range of 10.0.0.1 to 10.0.0.254 for the /24 subnet.
Related concept
CIDR notation defines the prefix length.
- ✗
10.0.0.255
Why it's wrong here
10.0.0.255 is the broadcast address for the /24 subnet and cannot be assigned to a host.
Common exam traps
Common exam trap: usable hosts are not the same as total addresses
Subnetting questions often tempt you into counting all addresses. In normal IPv4 subnets, the network and broadcast addresses are not usable host addresses.
Detailed technical explanation
How to think about this question
Subnetting questions test whether you can identify the network, broadcast address, usable range, mask and correct subnet. Slow down enough to calculate the block size correctly.
KKey Concepts to Remember
- CIDR notation defines the prefix length.
- Block size helps identify subnet boundaries.
- Network and broadcast addresses are not usable hosts in normal IPv4 subnets.
- The required host count determines the smallest suitable subnet.
TExam Day Tips
- Write the block size before choosing the subnet.
- Check whether the question asks for hosts, subnets or a specific address range.
- Do not confuse /24, /25, /26 and /27 host counts.
Key takeaway
Count usable hosts — not total addresses — and remember that the network and broadcast addresses are not available to hosts in standard IPv4 subnets.
Real-world example
How this comes up in practice
A network engineer segments a warehouse floor into three subnets: 20 scanners, 5 printers, and 2 management hosts. Picking the wrong mask wastes addresses or leaves too few usable hosts. Exam questions test whether you can apply CIDR notation, calculate block size, and identify the correct usable-host range for a given prefix.
What to study next
Got this wrong? Here's your next step.
Review block sizes, usable host formulas (2^n − 2), and how to find network and broadcast addresses for /24 through /30. Then practise related 220-1201 subnetting questions on CIDR, address ranges, and subnet selection.
- →
IP Addressing — study guide chapter
Learn the concepts, then practise the questions
- →
IP Addressing practice questions
Targeted practice on this topic area only
- →
All 220-1201 questions
1,020 questions across all exam domains
- →
CompTIA A+ Core 1 220-1201 study guide
Full concept coverage aligned to exam objectives
- →
220-1201 practice test guide
How to use practice tests most effectively before exam day
Related practice questions
Related 220-1201 practice-question pages
Use these pages to review the topic behind this question. This is how one missed question becomes focused revision.
Mobile Device Hardware Servicing practice questions
Practise 220-1201 questions linked to Mobile Device Hardware Servicing.
Mobile Device Connection Methods practice questions
Practise 220-1201 questions linked to Mobile Device Connection Methods.
Mobile Device Accessories practice questions
Practise 220-1201 questions linked to Mobile Device Accessories.
Mobile Device Network Connectivity practice questions
Practise 220-1201 questions linked to Mobile Device Network Connectivity.
Mobile Device Application Support practice questions
Practise 220-1201 questions linked to Mobile Device Application Support.
Network Protocols practice questions
Practise 220-1201 questions linked to Network Protocols.
TCP & UDP Ports practice questions
Practise 220-1201 questions linked to TCP & UDP Ports.
Wireless Networking Technologies practice questions
Practise 220-1201 questions linked to Wireless Networking Technologies.
Network Services practice questions
Practise 220-1201 questions linked to Network Services.
Network Configuration Concepts practice questions
Practise 220-1201 questions linked to Network Configuration Concepts.
Common Networking Hardware practice questions
Practise 220-1201 questions linked to Common Networking Hardware.
IP Addressing practice questions
Practise 220-1201 questions linked to IP Addressing.
Practice this exam
Start a free 220-1201 practice session
Short sessions build daily habit. Longer sessions build exam-day stamina. Try a timed session to simulate real conditions.
FAQ
Questions learners often ask
What does this 220-1201 question test?
IP Addressing — This question tests IP Addressing — CIDR notation defines the prefix length..
What is the correct answer to this question?
The correct answer is: 10.0.0.50 — The /24 subnet means the network is 10.0.0.0 with a range of 10.0.0.1 to 10.0.0.254. 10.0.0.50 falls within this range and is not reserved. This tests understanding of private IP ranges and subnet boundaries.
What should I do if I get this 220-1201 question wrong?
Review block sizes, usable host formulas (2^n − 2), and how to find network and broadcast addresses for /24 through /30. Then practise related 220-1201 subnetting questions on CIDR, address ranges, and subnet selection.
What is the key concept behind this question?
CIDR notation defines the prefix length.
About these practice questions
Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →
Keep practising
More 220-1201 practice questions
- A customer reports that their laptop's touchpad is unresponsive after they spilled a small amount of liquid on the keybo…
- A technician is replacing a cracked screen on a smartphone. After removing the old screen, they notice a small, flat, re…
- A user complains that their tablet's battery drains very quickly, even when not in use. The device is one year old and w…
- A technician is installing a new SSD into a customer's laptop. After removing the bottom cover, they see the existing ha…
- A technician is troubleshooting a laptop that will not charge. The battery is removable, and the power adapter works on…
- A customer brings in a smartphone with a broken charging port. They want the port replaced. During disassembly, the tech…
Last reviewed: Jun 18, 2026
This 220-1201 practice question is part of Courseiva's free CompTIA certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the 220-1201 exam.
Question Discussion
Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.
Sign in to join the discussion.