- A
The smartphone's Wi-Fi antenna is damaged.
Why wrong: If the antenna were damaged, the phone would likely fail on all Wi-Fi networks, not just the 5 GHz one at the office.
- B
The office access point is configured for 2.4 GHz only.
Why wrong: The scenario says other devices connect fine, so the access point is broadcasting 5 GHz. The issue is specific to the customer's device location.
- C
The smartphone is too far from the office access point for 5 GHz.
5 GHz has shorter range and lower penetration through obstacles. The customer may be in a location where the 5 GHz signal is too weak, while 2.4 GHz still works.
- D
The smartphone's Wi-Fi driver needs updating.
Why wrong: A driver issue would likely cause problems on all Wi-Fi networks, not just the 5 GHz band at the office.
Quick Answer
The answer is that the smartphone is too far from the office access point for 5 GHz Wi-Fi. This is correct because the 5 GHz band offers faster speeds but has a significantly shorter range and is more easily attenuated by walls, doors, and other physical obstacles compared to the 2.4 GHz band. On the CompTIA A+ Core 1 220-1201 exam, this question tests your understanding of wireless frequency characteristics and their real-world limitations, often appearing as a scenario where a device works at home but fails at a larger office. A common trap is assuming the smartphone’s hardware is faulty or that the network password is wrong, but the key clue is that other devices connect fine, isolating the issue to the client’s distance. Remember the memory tip: “5 GHz is fast but doesn’t last—2.4 GHz goes through the floor and door.”
220-1101 Mobile Device Network Connectivity Practice Question
This 220-1201 practice question tests your understanding of mobile device network connectivity. The scenario asks you to isolate a root cause — eliminate options that address a different problem before choosing. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.
A customer reports that their smartphone can connect to Wi-Fi at home but fails to connect to the company's 5 GHz Wi-Fi network in the office. Other devices connect fine. What is the most likely cause?
Clue words in this question
Noticing these words before you look at the options changes how you read each choice.
Clue:
"most likely"Why it matters: Probability qualifier — the question wants the most probable cause or outcome, not a guaranteed one. Eliminate low-probability options.
Answer choices
Why each option matters
Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.
Correct answer & explanation
The smartphone is too far from the office access point for 5 GHz.
The 5 GHz band has shorter range and is more easily blocked by walls and obstacles. The customer's device may be too far from the access point or there may be interference, causing the connection to fail while 2.4 GHz remains available.
Key principle: ACLs process entries top to bottom and stop at the first match. Entry order and interface direction matter as much as the permit or deny statement.
Answer analysis
Option-by-option breakdown
For each option: why learners choose it and why it is or isn't the right answer here.
- ✗
The smartphone's Wi-Fi antenna is damaged.
Why it's wrong here
If the antenna were damaged, the phone would likely fail on all Wi-Fi networks, not just the 5 GHz one at the office.
- ✗
The office access point is configured for 2.4 GHz only.
Why it's wrong here
The scenario says other devices connect fine, so the access point is broadcasting 5 GHz. The issue is specific to the customer's device location.
- ✓
The smartphone is too far from the office access point for 5 GHz.
Why this is correct
5 GHz has shorter range and lower penetration through obstacles. The customer may be in a location where the 5 GHz signal is too weak, while 2.4 GHz still works.
Clue confirmation
The clue word "most likely" in the question point toward this answer.
Related concept
Standard ACLs match source addresses.
- ✗
The smartphone's Wi-Fi driver needs updating.
Why it's wrong here
A driver issue would likely cause problems on all Wi-Fi networks, not just the 5 GHz band at the office.
Common exam traps
Common exam trap: ACLs stop at the first match
ACLs are processed top to bottom. The first matching entry wins, and an implicit deny usually exists at the end.
Trap categories for this question
Scenario analysis trap
The scenario says other devices connect fine, so the access point is broadcasting 5 GHz. The issue is specific to the customer's device location.
Detailed technical explanation
How to think about this question
ACL questions test precision: source, destination, protocol, port and direction. A generally correct ACL can still fail if it is applied on the wrong interface or in the wrong direction.
KKey Concepts to Remember
- Standard ACLs match source addresses.
- Extended ACLs can match source, destination, protocol and ports.
- The first matching ACL entry is used.
- There is usually an implicit deny at the end.
TExam Day Tips
- Check inbound versus outbound direction.
- Read the ACL from top to bottom.
- Look for a broader permit or deny above the intended line.
Key takeaway
ACLs process entries top to bottom and stop at the first match. Entry order and interface direction matter as much as the permit or deny statement.
Real-world example
How this comes up in practice
A security administrator must allow nursing staff to reach a patient records server while blocking access from the guest Wi-Fi VLAN. After applying an extended ACL, traffic is still blocked from nursing workstations. The ACL was applied outbound instead of inbound on the wrong interface. Questions like this test ACL direction and placement rules.
What to study next
Got this wrong? Here's your next step.
Review ACL processing order, placement rules (standard near destination, extended near source), and inbound vs outbound direction. Study wildcard masks and implicit deny. Then practise related 220-1201 ACL questions on filtering logic and placement.
- →
Mobile Device Network Connectivity — study guide chapter
Learn the concepts, then practise the questions
- →
Mobile Device Network Connectivity practice questions
Targeted practice on this topic area only
- →
All 220-1201 questions
1,020 questions across all exam domains
- →
CompTIA A+ Core 1 220-1201 study guide
Full concept coverage aligned to exam objectives
- →
220-1201 practice test guide
How to use practice tests most effectively before exam day
Related practice questions
Related 220-1201 practice-question pages
Use these pages to review the topic behind this question. This is how one missed question becomes focused revision.
Mobile Device Hardware Servicing practice questions
Practise 220-1201 questions linked to Mobile Device Hardware Servicing.
Mobile Device Connection Methods practice questions
Practise 220-1201 questions linked to Mobile Device Connection Methods.
Mobile Device Accessories practice questions
Practise 220-1201 questions linked to Mobile Device Accessories.
Mobile Device Network Connectivity practice questions
Practise 220-1201 questions linked to Mobile Device Network Connectivity.
Mobile Device Application Support practice questions
Practise 220-1201 questions linked to Mobile Device Application Support.
Network Protocols practice questions
Practise 220-1201 questions linked to Network Protocols.
TCP & UDP Ports practice questions
Practise 220-1201 questions linked to TCP & UDP Ports.
Wireless Networking Technologies practice questions
Practise 220-1201 questions linked to Wireless Networking Technologies.
Network Services practice questions
Practise 220-1201 questions linked to Network Services.
Network Configuration Concepts practice questions
Practise 220-1201 questions linked to Network Configuration Concepts.
Common Networking Hardware practice questions
Practise 220-1201 questions linked to Common Networking Hardware.
IP Addressing practice questions
Practise 220-1201 questions linked to IP Addressing.
Practice this exam
Start a free 220-1201 practice session
Short sessions build daily habit. Longer sessions build exam-day stamina. Try a timed session to simulate real conditions.
FAQ
Questions learners often ask
What does this 220-1201 question test?
Mobile Device Network Connectivity — This question tests Mobile Device Network Connectivity — Standard ACLs match source addresses..
What is the correct answer to this question?
The correct answer is: The smartphone is too far from the office access point for 5 GHz. — The 5 GHz band has shorter range and is more easily blocked by walls and obstacles. The customer's device may be too far from the access point or there may be interference, causing the connection to fail while 2.4 GHz remains available.
What should I do if I get this 220-1201 question wrong?
Review ACL processing order, placement rules (standard near destination, extended near source), and inbound vs outbound direction. Study wildcard masks and implicit deny. Then practise related 220-1201 ACL questions on filtering logic and placement.
Are there clue words in this question I should notice?
Yes — watch for: "most likely". Probability qualifier — the question wants the most probable cause or outcome, not a guaranteed one. Eliminate low-probability options.
What is the key concept behind this question?
Standard ACLs match source addresses.
About these practice questions
Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →
Same concept, more angles
1 more ways this is tested on 220-1201
These questions test the same concept from different angles. Work through them to make sure you can recognise it however the exam phrases it.
Variation 1. A user's smartphone intermittently disconnects from a known Wi-Fi network when they move to a different room. The network uses a single access point. What is the most likely cause?
medium- ✓ A.The smartphone is connecting to the 5 GHz band, which has poor wall penetration.
- B.The access point is overloaded with too many clients.
- C.The smartphone's MAC address is being filtered.
- D.The smartphone's battery saver mode is turning off Wi-Fi.
Why A: This tests understanding of Wi-Fi signal propagation. 5 GHz signals attenuate quickly through walls and obstacles, causing disconnections when moving away from the access point, while 2.4 GHz has better range.
Last reviewed: Jun 18, 2026
This 220-1201 practice question is part of Courseiva's free CompTIA certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the 220-1201 exam.
Question Discussion
Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.
Sign in to join the discussion.