Question 634 of 1,020
Internet Connection TypeseasyMultiple ChoiceObjective-mapped

Quick Answer

The answer is satellite internet, as it is the only connection type that provides reliable service for a remote rural cabin with no wired infrastructure. Satellite relies on a direct line-of-sight to an orbiting dish, requiring no cable TV or phone lines, making it ideal for locations where DSL or cable cannot reach due to the lack of physical wiring. On the CompTIA A+ Core 1 220-1201 exam, this question tests your understanding of connectivity options for underserved areas, often appearing as a scenario where cellular is a tempting trap due to its wireless nature, but satellite wins for consistency in truly remote spots. A common memory tip is to think “sky’s the limit”—if there’s no wire, look up to satellite, and remember that while latency is higher, coverage is unmatched for off-grid work.

220-1201 Internet Connection Types Practice Question

This 220-1201 practice question tests your understanding of internet connection types. Read the scenario carefully and evaluate each option against the stated constraints before committing to an answer. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.

A customer reports that their new rural cabin has no cable TV or phone line, but they need a reliable internet connection for remote work. Which connection type would provide the most consistent service without requiring a wired infrastructure?

Question 1easymultiple choice
Full question →

Answer choices

Why each option matters

Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.

Correct answer & explanation

Satellite

Satellite internet is the best choice for rural areas without wired infrastructure because it requires only a clear view of the sky. DSL and cable both depend on wired connections, and cellular may be unreliable in remote locations. Satellite provides coverage almost anywhere, though it has higher latency.

Key principle: OSPF neighbour adjacency depends on matching area, hello/dead timers, network type, and authentication — IP reachability alone is not enough.

Answer analysis

Option-by-option breakdown

For each option: why learners choose it and why it is or isn't the right answer here.

  • DSL

    Why it's wrong here

    DSL requires a copper phone line, which the cabin lacks.

  • Cable broadband

    Why it's wrong here

    Cable requires a coaxial cable connection, which is not available.

  • Satellite

    Why this is correct

    Satellite internet works anywhere with a clear view of the sky, making it ideal for rural areas.

    Related concept

    OSPF neighbours must agree on key parameters.

  • Cellular (4G/5G)

    Why it's wrong here

    Cellular may be unreliable in remote rural areas due to weak signal coverage.

Common exam traps

Common exam trap: OSPF can fail even when IP connectivity looks correct

OSPF neighbour formation depends on matching areas, timers, network type, authentication and passive-interface behaviour. Do not choose an answer only because the devices can ping.

Detailed technical explanation

How to think about this question

OSPF questions usually test the details that control adjacency and route selection. Read the neighbour state, area, router ID and interface configuration before deciding what is wrong.

KKey Concepts to Remember

  • OSPF neighbours must agree on key parameters.
  • Router ID selection can affect neighbour relationships and LSDB output.
  • OSPF cost influences the preferred path.
  • A route can appear in OSPF information but not become the installed route.

TExam Day Tips

  • Check area mismatch first when OSPF adjacency fails.
  • Review passive interfaces when a network is advertised but no neighbour forms.
  • Use show ip ospf neighbor and show ip route clues carefully.

Key takeaway

OSPF neighbour adjacency depends on matching area, hello/dead timers, network type, and authentication — IP reachability alone is not enough.

Real-world example

How this comes up in practice

A practitioner preparing for the 220-1201 exam encounters this exact type of scenario on the job. The correct answer here is not the most general option — it is the best answer for the specific constraint described. OSPF neighbour adjacency depends on matching area, hello/dead timers, network type, and authentication — IP reachability alone is not enough. Real exam questions reward reading the full scenario before eliminating options, because the constraint defines which answer fits.

What to study next

Got this wrong? Here's your next step.

Review OSPF neighbour requirements — matching area type, hello and dead timers, network type, stub flags, and authentication. Study show ip ospf neighbor states (INIT, 2-WAY, FULL). Then practise related 220-1201 OSPF questions on adjacency and route selection.

Related practice questions

Related 220-1201 practice-question pages

Use these pages to review the topic behind this question. This is how one missed question becomes focused revision.

Practice this exam

Start a free 220-1201 practice session

Short sessions build daily habit. Longer sessions build exam-day stamina. Try a timed session to simulate real conditions.

FAQ

Questions learners often ask

What does this 220-1201 question test?

Internet Connection Types — This question tests Internet Connection Types — OSPF neighbours must agree on key parameters..

What is the correct answer to this question?

The correct answer is: Satellite — Satellite internet is the best choice for rural areas without wired infrastructure because it requires only a clear view of the sky. DSL and cable both depend on wired connections, and cellular may be unreliable in remote locations. Satellite provides coverage almost anywhere, though it has higher latency.

What should I do if I get this 220-1201 question wrong?

Review OSPF neighbour requirements — matching area type, hello and dead timers, network type, stub flags, and authentication. Study show ip ospf neighbor states (INIT, 2-WAY, FULL). Then practise related 220-1201 OSPF questions on adjacency and route selection.

What is the key concept behind this question?

OSPF neighbours must agree on key parameters.

About these practice questions

Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →

How Courseiva writes practice questions · Editorial policy

Same concept, more angles

1 more ways this is tested on 220-1201

These questions test the same concept from different angles. Work through them to make sure you can recognise it however the exam phrases it.

Variation 1. A technician is setting up internet for a remote cabin that is 5 miles from the nearest road. No wired infrastructure exists. Which connection type is most practical for reliable, moderate-speed internet?

medium
  • A.DSL
  • B.Cable
  • C.Satellite
  • D.Fiber optic

Why C: Satellite internet is the only viable option for locations far from wired infrastructure because it requires only a clear view of the sky. DSL, cable, and fiber all depend on physical cabling that is not available in such a remote area.

Last reviewed: Jun 18, 2026

Question Discussion

Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.

Loading comments…

Sign in to join the discussion.

This 220-1201 practice question is part of Courseiva's free CompTIA certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the 220-1201 exam.