The answer is incorrectly installed motherboard standoffs causing a short circuit. When a PC powers on then off in a loop, the system detects a ground fault during the Power Good signal check, triggering an immediate shutdown to protect components. A standoff placed in a hole without a corresponding motherboard screw hole creates a metal-to-metal contact with the board’s traces, completing an unintended circuit to ground. On the CompTIA A+ Core 1 220-1201 exam, this scenario tests your ability to differentiate between a short and a failing power supply—a common trap is to replace the PSU first, but the loop symptom points to a physical short. Remember the mnemonic: “Standoffs short, PSUs puff”—if it loops instantly, check the standoffs before swapping the power supply.
220-1201 Core PC Hardware Troubleshooting Practice Question
This 220-1201 practice question tests your understanding of core pc hardware troubleshooting. The scenario asks you to isolate a root cause — eliminate options that address a different problem before choosing. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.
A user reports that their PC powers on for a second then immediately shuts off. This repeats in a loop. What is the most likely hardware issue?
Clue words in this question
Noticing these words before you look at the options changes how you read each choice.
Clue: "most likely"
Why it matters: Probability qualifier — the question wants the most probable cause or outcome, not a guaranteed one. Eliminate low-probability options.
Clue: "immediately / without restart"
Why it matters: Time or reboot constraint — the correct answer must take effect right away without requiring a reboot or reload.
Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.
Correct answer & explanation
✓
Incorrectly installed motherboard standoffs causing a short
The power-on-then-off loop is a classic symptom of a short circuit or power issue, often caused by a loose standoff, improperly seated component, or a failing power supply. The most common cause is a short to ground from a motherboard standoff in the wrong location.
Key principle: Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option.
Answer analysis
Option-by-option breakdown
For each option: why learners choose it and why it is or isn't the right answer here.
✗
Defective CPU
Why it's wrong here
A defective CPU usually causes no POST or beep codes, not a power cycle loop.
✓
Incorrectly installed motherboard standoffs causing a short
Why this is correct
Extra or misplaced standoffs can create a short circuit, causing the system to power on briefly then shut off to protect components.
Clue confirmation
The clue words "most likely", "immediately / without restart" in the question point toward this answer.
Related concept
Read the scenario before looking for a memorised answer.
✗
Overheated GPU
Why it's wrong here
GPU overheating would cause shutdowns after some time under load, not immediate power cycling.
✗
Corrupted BIOS
Why it's wrong here
A corrupted BIOS typically results in no display or beep codes, not a power-on loop.
Common exam traps
Common exam trap: answer the scenario, not the keyword
Many certification questions include familiar terms but test a specific constraint. Read the exact wording before choosing an answer that is generally true but wrong for this case.
Detailed technical explanation
How to think about this question
This question should be treated as a scenario, not a definition check. Identify the problem, the constraint and the best action. Then compare each option against those facts.
KKey Concepts to Remember
Read the scenario before looking for a memorised answer.
Find the constraint that changes the correct option.
Eliminate answers that are true in general but not in this case.
Use explanations to understand the rule behind the answer.
TExam Day Tips
→Underline the problem statement mentally.
→Watch for words such as best, first, most likely and least administrative effort.
→Review why wrong options are wrong, not only why the correct option is correct.
Key takeaway
Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option.
Real-world example
How this comes up in practice
A practitioner preparing for the 220-1201 exam encounters this exact type of scenario on the job. The correct answer here is not the most general option — it is the best answer for the specific constraint described. Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option. Real exam questions reward reading the full scenario before eliminating options, because the constraint defines which answer fits.
Related glossary terms
Concepts from this question explained
These glossary pages explain the core terms tested in this 220-1201 question in full detail.
Identify which 220-1201 exam domain this question belongs to, then review the specific concept being tested. Practise related questions in that domain and focus on understanding why each wrong answer is tempting — not just why the correct answer is right.
Core PC Hardware Troubleshooting — This question tests Core PC Hardware Troubleshooting — Read the scenario before looking for a memorised answer..
What is the correct answer to this question?
The correct answer is: Incorrectly installed motherboard standoffs causing a short — The power-on-then-off loop is a classic symptom of a short circuit or power issue, often caused by a loose standoff, improperly seated component, or a failing power supply. The most common cause is a short to ground from a motherboard standoff in the wrong location.
What should I do if I get this 220-1201 question wrong?
Identify which 220-1201 exam domain this question belongs to, then review the specific concept being tested. Practise related questions in that domain and focus on understanding why each wrong answer is tempting — not just why the correct answer is right.
Are there clue words in this question I should notice?
Yes — watch for: "most likely", "immediately / without restart". Probability qualifier — the question wants the most probable cause or outcome, not a guaranteed one. Eliminate low-probability options.
What is the key concept behind this question?
Read the scenario before looking for a memorised answer.
About these practice questions
Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →
Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.
This 220-1201 practice question is part of Courseiva's free CompTIA certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the 220-1201 exam.
Question Discussion
Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.
Sign in to join the discussion.