The answer is to enable the TPM device in the UEFI security settings. This is correct because Windows 11 mandates TPM 2.0 as a core hardware security requirement, and many motherboards ship with the TPM module disabled by default in UEFI to conserve resources or avoid conflicts with legacy OS installations. On the CompTIA A+ Core 1 220-1201 exam, this scenario tests your understanding of firmware-level security configuration and the specific system requirements for Windows 11 upgrades. A common trap is that technicians may mistakenly replace the CPU or reinstall Windows 10, when the fix is simply navigating to the UEFI Security tab and toggling the TPM state to Enabled. Remember the mnemonic: “TPM = Toggle in the Platform Menu” to recall that the solution is always a firmware setting, not a hardware swap.
220-1201 BIOS / UEFI Practice Question
This 220-1201 practice question tests your understanding of bios / uefi. The scenario asks you to isolate a root cause — eliminate options that address a different problem before choosing. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.
A technician upgrades a workstation from Windows 10 to Windows 11, but the installation fails with an error that the system does not support TPM 2.0. The CPU is compatible. What must the technician do in UEFI to resolve this?
Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.
Correct answer & explanation
✓
Enable the TPM device in UEFI security settings
Windows 11 requires TPM 2.0, which may be disabled in UEFI by default. The technician must enable the TPM device in the security settings. This tests knowledge of TPM configuration and its role in system requirements.
Key principle: NAT direction and interface roles matter as much as the IP address mapping. Inside/outside designation controls which traffic is translated.
Answer analysis
Option-by-option breakdown
For each option: why learners choose it and why it is or isn't the right answer here.
✗
Enable Secure Boot and set it to Windows UEFI mode
Why it's wrong here
Secure Boot is required but the error specifically mentions TPM, not Secure Boot.
✓
Enable the TPM device in UEFI security settings
Why this is correct
TPM 2.0 must be enabled and active for Windows 11 installation.
Related concept
Static NAT maps one inside address to one outside address.
✗
Disable CSM and set boot mode to UEFI only
Why it's wrong here
This is good practice but does not address the TPM requirement.
✗
Update the UEFI firmware to the latest version
Why it's wrong here
While updating firmware can help, the error indicates TPM is disabled, not that it's missing.
Common exam traps
Common exam trap: NAT rules depend on direction and matching traffic
NAT is not only about the public address. The inside/outside interface roles and the ACL or rule that matches traffic are just as important.
Detailed technical explanation
How to think about this question
NAT questions usually test address translation, overload/PAT behaviour, static mappings and whether the right traffic is being translated. Read the interface direction and address terms carefully.
KKey Concepts to Remember
Static NAT maps one inside address to one outside address.
PAT allows many inside hosts to share one public address using ports.
Inside local and inside global describe the private and translated addresses.
NAT ACLs identify traffic for translation, not always security filtering.
TExam Day Tips
→Identify inside and outside interfaces first.
→Check whether the scenario needs static NAT, dynamic NAT or PAT.
→Do not confuse NAT matching ACLs with normal packet-filtering intent.
Key takeaway
NAT direction and interface roles matter as much as the IP address mapping. Inside/outside designation controls which traffic is translated.
Real-world example
How this comes up in practice
A small business has 20 workstations on the 192.168.1.0/24 network and one public IP from its ISP. The router uses PAT (NAT overload) so all 20 devices share one public address using different source ports. NAT questions test whether you understand the four address terms and which direction each translation applies.
Related glossary terms
Concepts from this question explained
These glossary pages explain the core terms tested in this 220-1201 question in full detail.
Review the four NAT address types (inside local, inside global, outside local, outside global), PAT port overload, and static vs dynamic NAT use cases. Then practise related 220-1201 NAT questions on configuration and troubleshooting.
BIOS / UEFI — This question tests BIOS / UEFI — Static NAT maps one inside address to one outside address..
What is the correct answer to this question?
The correct answer is: Enable the TPM device in UEFI security settings — Windows 11 requires TPM 2.0, which may be disabled in UEFI by default. The technician must enable the TPM device in the security settings. This tests knowledge of TPM configuration and its role in system requirements.
What should I do if I get this 220-1201 question wrong?
Review the four NAT address types (inside local, inside global, outside local, outside global), PAT port overload, and static vs dynamic NAT use cases. Then practise related 220-1201 NAT questions on configuration and troubleshooting.
What is the key concept behind this question?
Static NAT maps one inside address to one outside address.
About these practice questions
Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →
Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.
This 220-1201 practice question is part of Courseiva's free CompTIA certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the 220-1201 exam.
Question Discussion
Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.
Sign in to join the discussion.