The answer is that the DVI cable is loose or the monitor is not powered on. This is the most likely cause because, while some graphics cards may disable a DVI port when a DisplayPort is active, the simplest and most common issue with a dual monitor DVI not detected DisplayPort setup is a physical connection or power problem. On the CompTIA A+ Core 1 220-1201 exam, this scenario tests your ability to follow the troubleshooting methodology—always check the obvious before diving into driver or configuration settings. A common trap is overthinking the DisplayPort priority feature, but the exam emphasizes verifying cable seating and power first. Remember the memory tip: “DVI: Double-check Voltage and Insertion” to always confirm power and a secure connection before blaming the port.
220-1201 Display Devices Troubleshooting Practice Question
This 220-1201 practice question tests your understanding of display devices troubleshooting. The scenario asks you to isolate a root cause — eliminate options that address a different problem before choosing. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.
A technician is setting up a dual-monitor workstation. One monitor is connected via DisplayPort, the other via DVI. The DVI monitor is not detected. The DisplayPort monitor works fine. Which of the following is the most likely cause?
Clue words in this question
Noticing these words before you look at the options changes how you read each choice.
Clue: "most likely"
Why it matters: Probability qualifier — the question wants the most probable cause or outcome, not a guaranteed one. Eliminate low-probability options.
Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.
Correct answer & explanation
✓
The DVI cable is loose or the monitor is not powered on
Many graphics cards require that the DisplayPort monitor be the primary display or that the DVI port is disabled when a DisplayPort is active in certain configurations. However, the most common issue is that the DVI cable is not fully seated or the monitor is not powered on. The correct answer focuses on checking the DVI connection and power, as these are simple to verify.
Key principle: Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option.
Answer analysis
Option-by-option breakdown
For each option: why learners choose it and why it is or isn't the right answer here.
✗
The DVI port on the graphics card is faulty
Why it's wrong here
While possible, this is less likely than a simple connection issue; always check cables first.
✓
The DVI cable is loose or the monitor is not powered on
Why this is correct
A loose cable or unpowered monitor is the most common reason for a display not being detected.
Clue confirmation
The clue word "most likely" in the question point toward this answer.
Related concept
Read the scenario before looking for a memorised answer.
✗
The graphics card does not support mixed DisplayPort and DVI outputs
Why it's wrong here
Most modern GPUs support mixed outputs; this is rarely a limitation.
✗
The DVI monitor's resolution is set too high
Why it's wrong here
Resolution settings are applied after detection; the monitor must be detected first.
Common exam traps
Common exam trap: answer the scenario, not the keyword
Many certification questions include familiar terms but test a specific constraint. Read the exact wording before choosing an answer that is generally true but wrong for this case.
Trap categories for this question
Command / output trap
Most modern GPUs support mixed outputs; this is rarely a limitation.
Detailed technical explanation
How to think about this question
This question should be treated as a scenario, not a definition check. Identify the problem, the constraint and the best action. Then compare each option against those facts.
KKey Concepts to Remember
Read the scenario before looking for a memorised answer.
Find the constraint that changes the correct option.
Eliminate answers that are true in general but not in this case.
Use explanations to understand the rule behind the answer.
TExam Day Tips
→Underline the problem statement mentally.
→Watch for words such as best, first, most likely and least administrative effort.
→Review why wrong options are wrong, not only why the correct option is correct.
Key takeaway
Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option.
Real-world example
How this comes up in practice
A practitioner preparing for the 220-1201 exam encounters this exact type of scenario on the job. The correct answer here is not the most general option — it is the best answer for the specific constraint described. Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option. Real exam questions reward reading the full scenario before eliminating options, because the constraint defines which answer fits.
Related glossary terms
Concepts from this question explained
These glossary pages explain the core terms tested in this 220-1201 question in full detail.
Identify which 220-1201 exam domain this question belongs to, then review the specific concept being tested. Practise related questions in that domain and focus on understanding why each wrong answer is tempting — not just why the correct answer is right.
Display Devices Troubleshooting — This question tests Display Devices Troubleshooting — Read the scenario before looking for a memorised answer..
What is the correct answer to this question?
The correct answer is: The DVI cable is loose or the monitor is not powered on — Many graphics cards require that the DisplayPort monitor be the primary display or that the DVI port is disabled when a DisplayPort is active in certain configurations. However, the most common issue is that the DVI cable is not fully seated or the monitor is not powered on. The correct answer focuses on checking the DVI connection and power, as these are simple to verify.
What should I do if I get this 220-1201 question wrong?
Identify which 220-1201 exam domain this question belongs to, then review the specific concept being tested. Practise related questions in that domain and focus on understanding why each wrong answer is tempting — not just why the correct answer is right.
Are there clue words in this question I should notice?
Yes — watch for: "most likely". Probability qualifier — the question wants the most probable cause or outcome, not a guaranteed one. Eliminate low-probability options.
What is the key concept behind this question?
Read the scenario before looking for a memorised answer.
About these practice questions
Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →
Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.
This 220-1201 practice question is part of Courseiva's free CompTIA certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the 220-1201 exam.
Question Discussion
Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.
Sign in to join the discussion.