Courseiva
Question 89 of 1,840
easyMultiple ChoiceObjective-mapped

350-401 Practice Question: Runs the following command on Switch SW5: SW5#…

A network engineer runs the following command on Switch SW5:

SW5# show spanning-tree vlan 50

VLAN0050 Spanning tree enabled protocol ieee Root ID Priority 24626 Address aabb.cc00.0800 Cost 4 Port 1 (GigabitEthernet0/1) Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec

Bridge ID Priority 32768 (priority 32768 sys-id-ext 50) Address aabb.cc00.0900 Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec Aging Time 300 sec

Interface           Role Sts Cost      Prio.Nbr Type

------------------- ---- --- --------- -------- ------------------------------ Gi0/1 Root FWD 4 128.1 P2p Gi0/2 Desg FWD 4 128.2 P2p Gi0/3 Desg FWD 4 128.3 P2p Gi0/4 Altn BLK 4 128.4 P2p

Based on this output, how many ports are in the Forwarding state?

⚠ Common exam trap

Cisco often tests the ability to distinguish between port roles and port states; candidates may confuse the number of ports in a role (e.g., Root, Designated) with the number in the Forwarding state, or mistakenly count the Alternate port as forwarding because it has a role, ignoring its BLK state.

Answer choices

Why each option matters

Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.

Correct answer & explanation

3

The output shows four interfaces: Gi0/1 (Root FWD), Gi0/2 (Desg FWD), Gi0/3 (Desg FWD), and Gi0/4 (Altn BLK). Three ports (Gi0/1, Gi0/2, Gi0/3) are in the Forwarding state, while Gi0/4 is in the Blocking state. Therefore, the correct answer is 3.

Answer analysis

Option-by-option breakdown

For each option: why learners choose it and why it is or isn't the right answer here.

  • 1

    Why it's wrong here

    Incorrect. There are three forwarding ports.

  • 2

    Why it's wrong here

    Incorrect. There are three forwarding ports.

  • 3

    Why this is correct

    Correct. Gi0/1, Gi0/2, and Gi0/3 are all in FWD state.

  • 4

    Why it's wrong here

    Incorrect. Gi0/4 is in BLK state.

Visual reference

SW1 Root Bridge SW2 SW3 BLK DP DP RP RP STP blocks one link to prevent loops DP = Designated Port RP = Root Port BLK = Blocked

About these practice questions

Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →

How Courseiva writes practice questions · Editorial policy

Last reviewed: Jul 4, 2026

Question Discussion

Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.

Loading comments…

Sign in to join the discussion.

This 350-401 practice question is part of Courseiva's free Cisco certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the 350-401 exam.