n on a Cisco IOS-XE switch:\n\nmonitor session 2 source interface GigabitEthernet1/0/3 rx\nmonitor session 2 destination interface GigabitEthernet1/0/4\n\nWhat is the effect of this configuration?","explanation":"The configuration explicitly specifies the `rx` keyword for the source interface, which limits SPAN to copying only received (ingress) traffic on GigabitEthernet1/0/3 to the destination interface GigabitEthernet1/0/4. Without the `rx` or `tx` keyword, the default behavior would copy both directions, but here the explicit `rx` overrides that default.","domainId":null,"difficulty":"medium","questionType":"multiple_choice","pbqConfig":null,"exhibitText":null,"options":[{"id":"bd711599-3e2f-4ac8-9236-3a5eb7c97a7d","label":null,"text":"Only traffic received on GigabitEthernet1/0/3 is copied to GigabitEthernet1/0/4.","isCorrect":true},{"id":"43f84c08-0cfc-44ec-a7b4-ff420b11e5c6","label":null,"text":"Both ingress and egress traffic on GigabitEthernet1/0/3 is copied to GigabitEthernet1/0/4.","isCorrect":false},{"id":"3506b197-923c-4251-b9cf-022862e9567e","label":null,"text":"Traffic on GigabitEthernet1/0/4 is mirrored to GigabitEthernet1/0/3.","isCorrect":false},{"id":"a9cf547c-6b29-440a-8904-d0c9eee9a273","label":null,"text":"The configuration is invalid because the destination interface must be in trunk mode.","isCorrect":false}],"domainName":null,"domainSlug":null},{"id":"eddc2956-37d0-46a2-b76f-e946628b988e","slug":"eigrp-drag-da554a","questionText":"Drag and drop the steps of EIGRP redistribution from OSPF with metric seeding into the correct order, from first to last.","explanation":"First, the EIGRP routing process must be entered. Then, the redistribute command is used with the OSPF process and a metric. Optionally, route-map filtering can be applied. Finally, verification ensures routes appear in the EIGRP topology table.","domainId":null,"difficulty":"medium","questionType":"drag_order","pbqConfig":{"steps":["Enter EIGRP router configuration mode","Issue redistribute ospf metric ","Optionally apply route-map to filter redistributed routes","Exit configuration mode","Verify redistributed routes with show ip eigrp topology"]},"exhibitText":null,"options":[{"id":"00f89757-2d67-43ae-8d4a-6e36520b5554","label":null,"text":"Enter EIGRP router configuration mode","isCorrect":true},{"id":"a4f373d1-a8d8-4f94-86c5-0728fac61b0f","label":null,"text":"Issue redistribute ospf metric ","isCorrect":true},{"id":"6108ae41-3ca6-4212-8d7d-e288ba0d77cb","label":null,"text":"Optionally apply route-map to filter redistributed routes","isCorrect":true},{"id":"5daf7862-f4c7-472b-b9d3-0039bb7f1f89","label":null,"text":"Exit configuration mode","isCorrect":true},{"id":"e46b3780-6116-44e9-af8f-3d7a2de40d7f","label":null,"text":"Verify redistributed routes with show ip eigrp topology","isCorrect":true}],"domainName":null,"domainSlug":null,"orderedSteps":["Enter EIGRP router configuration mode","Issue redistribute ospf metric ","Optionally apply route-map to filter redistributed routes","Exit configuration mode","Verify redistributed routes with show ip eigrp topology"]},{"id":"e11deaf7-80c7-4ea2-b3d6-55937ae74bfd","slug":"cisco-dna-center-drag-75e5bc","questionText":"Drag and drop the steps of Cisco DNA Center device onboarding via PnP into the correct order, from first to last.","explanation":"The PnP onboarding process begins with the device obtaining an IP address via DHCP and receiving the PnP server address from DHCP options. The device then discovers the Cisco DNA Center PnP server and authenticates using a certificate or credentials. After authentication, the device downloads its Day 0 configuration and image from DNA Center. Finally, the device applies the configuration and joins the fabric or network.","domainId":null,"difficulty":"medium","questionType":"drag_order","pbqConfig":{"steps":["Device boots and obtains IP via DHCP with PnP options","Device disc