Question 1,329 of 2,015
Cisco DNA CentermediumDrag & DropObjective-mapped

Quick Answer

The correct order for the Cisco DNA Center SWIM software image update process begins with importing the new image into the image repository, followed by distribution to target devices, then a pre-check for compatibility and storage, next a device reboot with the new image, and finally a post-check to verify the image and status. This sequence is critical because SWIM ensures network devices are upgraded with validated images while minimizing downtime; the pre-check prevents failures by confirming device readiness before the disruptive reboot, and the post-check confirms the device is running the desired image and operational. On the ENCOR 350-401 exam, this drag-and-drop question tests your understanding of the automation lifecycle within Cisco DNA Center’s software image management, often appearing alongside topics like network assurance and intent-based networking. A common trap is placing the pre-check after the reboot, but remember that validation must happen before the device restarts. Use the mnemonic “Import, Distribute, Pre-check, Reboot, Post-check” to lock in the order.

350-401 Cisco DNA Center Practice Question

This 350-401 practice question tests your understanding of cisco dna center. Read the scenario carefully and evaluate each option against the stated constraints before committing to an answer. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.

Drag and drop the steps of Cisco DNA Center software image update (SWIM) process into the correct order, from first to last.

Clue words in this question

Noticing these words before you look at the options changes how you read each choice.

  • Clue: "first"

    Why it matters: Order matters here. You are being tested on which action comes before the others — not which action is generally useful.

Question 1mediumdrag order
Full question →

Answer choices

Why each option matters

Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.

Correct answer & explanation

Import new image into DNA Center repository

The SWIM process starts with the administrator importing the new image into the Cisco DNA Center image repository. Next, the image is distributed to the target devices. A pre-check verifies device compatibility and available storage. Then the device is rebooted with the new image. Finally, a post-check confirms the device is running the desired image and operational.

Key principle: NAT direction and interface roles matter as much as the IP address mapping. Inside/outside designation controls which traffic is translated.

Common exam traps

Common exam trap: NAT rules depend on direction and matching traffic

NAT is not only about the public address. The inside/outside interface roles and the ACL or rule that matches traffic are just as important.

Detailed technical explanation

How to think about this question

NAT questions usually test address translation, overload/PAT behaviour, static mappings and whether the right traffic is being translated. Read the interface direction and address terms carefully.

KKey Concepts to Remember

  • Static NAT maps one inside address to one outside address.
  • PAT allows many inside hosts to share one public address using ports.
  • Inside local and inside global describe the private and translated addresses.
  • NAT ACLs identify traffic for translation, not always security filtering.

TExam Day Tips

  • Identify inside and outside interfaces first.
  • Check whether the scenario needs static NAT, dynamic NAT or PAT.
  • Do not confuse NAT matching ACLs with normal packet-filtering intent.

Key takeaway

NAT direction and interface roles matter as much as the IP address mapping. Inside/outside designation controls which traffic is translated.

Real-world example

How this comes up in practice

A small business has 20 workstations on the 192.168.1.0/24 network and one public IP from its ISP. The router uses PAT (NAT overload) so all 20 devices share one public address using different source ports. NAT questions test whether you understand the four address terms and which direction each translation applies.

What to study next

Got this wrong? Here's your next step.

Review the four NAT address types (inside local, inside global, outside local, outside global), PAT port overload, and static vs dynamic NAT use cases. Then practise related 350-401 NAT questions on configuration and troubleshooting.

Related practice questions

Related 350-401 practice-question pages

Use these pages to review the topic behind this question. This is how one missed question becomes focused revision.

Practice this exam

Start a free 350-401 practice session

Short sessions build daily habit. Longer sessions build exam-day stamina. Try a timed session to simulate real conditions.

FAQ

Questions learners often ask

What does this 350-401 question test?

Cisco DNA Center — This question tests Cisco DNA Center — Static NAT maps one inside address to one outside address..

What is the correct answer to this question?

The correct answer is: Import new image into DNA Center repository — The SWIM process starts with the administrator importing the new image into the Cisco DNA Center image repository. Next, the image is distributed to the target devices. A pre-check verifies device compatibility and available storage. Then the device is rebooted with the new image. Finally, a post-check confirms the device is running the desired image and operational.

What should I do if I get this 350-401 question wrong?

Review the four NAT address types (inside local, inside global, outside local, outside global), PAT port overload, and static vs dynamic NAT use cases. Then practise related 350-401 NAT questions on configuration and troubleshooting.

Are there clue words in this question I should notice?

Yes — watch for: "first". Order matters here. You are being tested on which action comes before the others — not which action is generally useful.

What is the key concept behind this question?

Static NAT maps one inside address to one outside address.

About these practice questions

Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →

How Courseiva writes practice questions · Editorial policy

Last reviewed: Jun 18, 2026

Question Discussion

Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.

Loading comments…

Sign in to join the discussion.

This 350-401 practice question is part of Courseiva's free Cisco certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the 350-401 exam.