- A
A route map used in redistribution can match on a prefix list to selectively redistribute only specific networks.
Correct. Route maps can use 'match ip address prefix-list' to filter routes based on prefix lists, allowing selective redistribution.
- B
If a route map is applied to a redistribution command and no 'permit' statement matches, all routes are denied by default.
Correct. Route maps have an implicit deny at the end. If no 'permit' sequence matches a route, that route is not redistributed.
- C
The 'set metric' command within a route map can only be used to increase the metric of redistributed routes, not decrease it.
Why wrong: Incorrect. The 'set metric' command can set any valid metric value, including lower values, depending on the routing protocol.
- D
Route maps can change the administrative distance of redistributed routes by using the 'set distance' command.
Why wrong: Incorrect. There is no 'set distance' command in route maps. Administrative distance is modified using the 'distance' command in router configuration mode.
- E
Route maps can match on the route tag using the 'match tag' command, allowing filtering based on manually assigned tags.
Correct. The 'match tag' command allows route maps to filter routes based on their tag value, which is useful for loop prevention and policy control.
Quick Answer
The correct answer is that route maps can match on the route tag using the 'match tag' command, allowing filtering based on manually assigned tags. This is true because route maps provide granular control during route map redistribution usage, enabling you to selectively filter or modify routes based on attributes like tags, prefix lists, or metrics. On the Cisco CCNP ENARSI 300-410 exam, this concept tests your understanding of how redistribution policies are built—a common trap is assuming route maps automatically permit all routes, but in reality, an explicit 'permit' statement is required for any route to be redistributed. Another key point is that route maps cannot change administrative distance; that is handled separately with the 'distance' command. For a quick memory tip, remember that route maps are for matching and setting attributes during redistribution, not for altering trustworthiness—think "match and set, not distance yet."
300-410 Route Redistribution Practice Question
This 300-410 practice question tests your understanding of route redistribution. The scenario asks you to isolate a root cause — eliminate options that address a different problem before choosing. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.
Which TWO statements are true regarding the use of route maps for route redistribution? (Choose TWO.)
Answer choices
Why each option matters
Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.
Correct answer & explanation
A route map used in redistribution can match on a prefix list to selectively redistribute only specific networks.
Route maps in redistribution allow granular control. They can match on various attributes like prefix lists, tags, or metrics. The 'set' command can modify metrics or tags. However, route maps do not automatically permit all routes; a 'permit' statement is required for routes to be redistributed. Also, route maps cannot change the administrative distance of redistributed routes; that is done with the 'distance' command.
Key principle: ACLs process entries top to bottom and stop at the first match. Entry order and interface direction matter as much as the permit or deny statement.
Answer analysis
Option-by-option breakdown
For each option: why learners choose it and why it is or isn't the right answer here.
- ✓
A route map used in redistribution can match on a prefix list to selectively redistribute only specific networks.
Why this is correct
Correct. Route maps can use 'match ip address prefix-list' to filter routes based on prefix lists, allowing selective redistribution.
Related concept
Standard ACLs match source addresses.
- ✓
If a route map is applied to a redistribution command and no 'permit' statement matches, all routes are denied by default.
Why this is correct
Correct. Route maps have an implicit deny at the end. If no 'permit' sequence matches a route, that route is not redistributed.
Related concept
Standard ACLs match source addresses.
- ✗
The 'set metric' command within a route map can only be used to increase the metric of redistributed routes, not decrease it.
Why it's wrong here
Incorrect. The 'set metric' command can set any valid metric value, including lower values, depending on the routing protocol.
- ✗
Route maps can change the administrative distance of redistributed routes by using the 'set distance' command.
Why it's wrong here
Incorrect. There is no 'set distance' command in route maps. Administrative distance is modified using the 'distance' command in router configuration mode.
- ✓
Route maps can match on the route tag using the 'match tag' command, allowing filtering based on manually assigned tags.
Why this is correct
Correct. The 'match tag' command allows route maps to filter routes based on their tag value, which is useful for loop prevention and policy control.
Related concept
Standard ACLs match source addresses.
Common exam traps
Common exam trap: ACLs stop at the first match
ACLs are processed top to bottom. The first matching entry wins, and an implicit deny usually exists at the end.
Trap categories for this question
Command / output trap
Incorrect. The 'set metric' command can set any valid metric value, including lower values, depending on the routing protocol.
Detailed technical explanation
How to think about this question
ACL questions test precision: source, destination, protocol, port and direction. A generally correct ACL can still fail if it is applied on the wrong interface or in the wrong direction.
KKey Concepts to Remember
- Standard ACLs match source addresses.
- Extended ACLs can match source, destination, protocol and ports.
- The first matching ACL entry is used.
- There is usually an implicit deny at the end.
TExam Day Tips
- Check inbound versus outbound direction.
- Read the ACL from top to bottom.
- Look for a broader permit or deny above the intended line.
Key takeaway
ACLs process entries top to bottom and stop at the first match. Entry order and interface direction matter as much as the permit or deny statement.
Real-world example
How this comes up in practice
A security administrator must allow nursing staff to reach a patient records server while blocking access from the guest Wi-Fi VLAN. After applying an extended ACL, traffic is still blocked from nursing workstations. The ACL was applied outbound instead of inbound on the wrong interface. Questions like this test ACL direction and placement rules.
What to study next
Got this wrong? Here's your next step.
Review ACL processing order, placement rules (standard near destination, extended near source), and inbound vs outbound direction. Study wildcard masks and implicit deny. Then practise related 300-410 ACL questions on filtering logic and placement.
- →
Route Redistribution — study guide chapter
Learn the concepts, then practise the questions
- →
Route Redistribution practice questions
Targeted practice on this topic area only
- →
All 300-410 questions
2,152 questions across all exam domains
- →
Cisco CCNP ENARSI 300-410 study guide
Full concept coverage aligned to exam objectives
- →
300-410 practice test guide
How to use practice tests most effectively before exam day
Related practice questions
Related 300-410 practice-question pages
Use these pages to review the topic behind this question. This is how one missed question becomes focused revision.
Layer 3 Technologies practice questions
Practise 300-410 questions linked to Layer 3 Technologies.
EIGRP Troubleshooting practice questions
Practise 300-410 questions linked to EIGRP Troubleshooting.
OSPF Troubleshooting (v2/v3) practice questions
Practise 300-410 questions linked to OSPF Troubleshooting (v2/v3).
BGP Troubleshooting practice questions
Practise 300-410 questions linked to BGP Troubleshooting.
Route Redistribution practice questions
Practise 300-410 questions linked to Route Redistribution.
Policy-Based Routing (PBR) practice questions
Practise 300-410 questions linked to Policy-Based Routing (PBR).
VRF-Lite practice questions
Practise 300-410 questions linked to VRF-Lite.
Route Maps and Route Filtering practice questions
Practise 300-410 questions linked to Route Maps and Route Filtering.
Administrative Distance practice questions
Practise 300-410 questions linked to Administrative Distance.
Route Summarization practice questions
Practise 300-410 questions linked to Route Summarization.
Bidirectional Forwarding Detection (BFD) practice questions
Practise 300-410 questions linked to Bidirectional Forwarding Detection (BFD).
VPN Technologies practice questions
Practise 300-410 questions linked to VPN Technologies.
Practice this exam
Start a free 300-410 practice session
Short sessions build daily habit. Longer sessions build exam-day stamina. Try a timed session to simulate real conditions.
FAQ
Questions learners often ask
What does this 300-410 question test?
Route Redistribution — This question tests Route Redistribution — Standard ACLs match source addresses..
What is the correct answer to this question?
The correct answer is: A route map used in redistribution can match on a prefix list to selectively redistribute only specific networks. — Route maps in redistribution allow granular control. They can match on various attributes like prefix lists, tags, or metrics. The 'set' command can modify metrics or tags. However, route maps do not automatically permit all routes; a 'permit' statement is required for routes to be redistributed. Also, route maps cannot change the administrative distance of redistributed routes; that is done with the 'distance' command.
What should I do if I get this 300-410 question wrong?
Review ACL processing order, placement rules (standard near destination, extended near source), and inbound vs outbound direction. Study wildcard masks and implicit deny. Then practise related 300-410 ACL questions on filtering logic and placement.
What is the key concept behind this question?
Standard ACLs match source addresses.
About these practice questions
Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →
Last reviewed: Jun 18, 2026
This 300-410 practice question is part of Courseiva's free Cisco certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the 300-410 exam.
Question Discussion
Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.
Sign in to join the discussion.