Question 1mediumdrag order
Read the full network assurance explanation →Question 220 of 2,152
Quick Answer
The correct order begins with entering global configuration mode, then defining the EEM applet and its syslog trigger, followed by configuring the action to execute, and finally exiting configuration mode to register the applet. This sequence is correct because an EEM applet must first be created within the device’s configuration context, where you specify the event manager applet name and the syslog pattern that will act as the trigger; only after the trigger and action are defined does exiting configuration mode commit the applet to the running configuration, effectively registering it with the Embedded Event Manager subsystem. On the Cisco CCNP ENARSI 300-410 exam, this drag-and-drop task tests your understanding of the EEM lifecycle and the distinction between defining an applet and activating it—a common trap is placing the exit step too early, which would leave the applet incomplete. A helpful memory tip is to think of it as “Define, Trigger, Act, Exit”—you cannot register what you have not fully built.
300-410 Embedded Event Manager (EEM) Practice Question
This 300-410 practice question tests your understanding of embedded event manager (eem). This is a configuration task: choose the command set that satisfies every stated requirement. Small differences — like 'secret' vs 'password' or 'transport input ssh' vs 'all' — change whether the answer is correct. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.
Drag and drop the steps to create and register an EEM applet for syslog events into the correct order, from first to last.
Clue words in this question
Noticing these words before you look at the options changes how you read each choice.
Clue:
"first"Why it matters: Order matters here. You are being tested on which action comes before the others — not which action is generally useful.
Answer choices
Why each option matters
Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.
Correct answer & explanation
✓
Enter global configuration mode
The correct order begins with entering global configuration mode, then defining the EEM applet and its syslog trigger, followed by configuring the action to execute, and finally exiting configuration mode to register the applet.
Key principle: Authentication proves identity; authorization controls what that identity can do after login. Both must work for full privileged access.
Common exam traps
Common exam trap: authentication is not authorization
Logging in proves the user can authenticate. It does not automatically mean the user is allowed to enter privileged or configuration mode. Watch for AAA authorization, privilege level and command authorization details.
Detailed technical explanation
How to think about this question
This kind of question is testing the difference between identity and permission. A user may successfully log in to a router because authentication is working, but still fail to enter configuration mode because authorization is missing, misconfigured or mapped to a lower privilege level.
KKey Concepts to Remember
- Authentication checks who the user is.
- Authorization controls what the user is allowed to do after login.
- Privilege levels affect access to EXEC and configuration commands.
- AAA, TACACS+ and RADIUS can separate login success from command access.
TExam Day Tips
- Do not assume successful login means full administrative access.
- Look for words such as cannot enter configuration mode, privilege level, authorization or command access.
- Separate login problems from permission problems before choosing the answer.
Key takeaway
Authentication proves identity; authorization controls what that identity can do after login. Both must work for full privileged access.
Real-world example
How this comes up in practice
A practitioner preparing for the 300-410 exam encounters this exact type of scenario on the job. The correct answer here is not the most general option — it is the best answer for the specific constraint described. Authentication proves identity; authorization controls what that identity can do after login. Both must work for full privileged access. Real exam questions reward reading the full scenario before eliminating options, because the constraint defines which answer fits.
What to study next
Got this wrong? Here's your next step.
Review Cisco AAA concepts — authentication, authorization, and accounting. Study privilege levels (0–15), command authorization under TACACS+, and how RADIUS differs. Then practise related 300-410 questions on access control and AAA configuration.
- →
Embedded Event Manager (EEM) — study guide chapter
Learn the concepts, then practise the questions
- →
Embedded Event Manager (EEM) practice questions
Targeted practice on this topic area only
- →
All 300-410 questions
2,152 questions across all exam domains
- →
Cisco CCNP ENARSI 300-410 study guide
Full concept coverage aligned to exam objectives
- →
300-410 practice test guide
How to use practice tests most effectively before exam day
Related practice questions
Related 300-410 practice-question pages
Use these pages to review the topic behind this question. This is how one missed question becomes focused revision.
Layer 3 Technologies practice questions
Practise 300-410 questions linked to Layer 3 Technologies.
EIGRP Troubleshooting practice questions
Practise 300-410 questions linked to EIGRP Troubleshooting.
OSPF Troubleshooting (v2/v3) practice questions
Practise 300-410 questions linked to OSPF Troubleshooting (v2/v3).
BGP Troubleshooting practice questions
Practise 300-410 questions linked to BGP Troubleshooting.
Route Redistribution practice questions
Practise 300-410 questions linked to Route Redistribution.
Policy-Based Routing (PBR) practice questions
Practise 300-410 questions linked to Policy-Based Routing (PBR).
VRF-Lite practice questions
Practise 300-410 questions linked to VRF-Lite.
Route Maps and Route Filtering practice questions
Practise 300-410 questions linked to Route Maps and Route Filtering.
Administrative Distance practice questions
Practise 300-410 questions linked to Administrative Distance.
Route Summarization practice questions
Practise 300-410 questions linked to Route Summarization.
Bidirectional Forwarding Detection (BFD) practice questions
Practise 300-410 questions linked to Bidirectional Forwarding Detection (BFD).
VPN Technologies practice questions
Practise 300-410 questions linked to VPN Technologies.
Practice this exam
Start a free 300-410 practice session
Short sessions build daily habit. Longer sessions build exam-day stamina. Try a timed session to simulate real conditions.
FAQ
Questions learners often ask
What does this 300-410 question test?
Embedded Event Manager (EEM) — This question tests Embedded Event Manager (EEM) — Authentication checks who the user is..
What is the correct answer to this question?
The correct answer is: Enter global configuration mode — The correct order begins with entering global configuration mode, then defining the EEM applet and its syslog trigger, followed by configuring the action to execute, and finally exiting configuration mode to register the applet.
What should I do if I get this 300-410 question wrong?
Review Cisco AAA concepts — authentication, authorization, and accounting. Study privilege levels (0–15), command authorization under TACACS+, and how RADIUS differs. Then practise related 300-410 questions on access control and AAA configuration.
Are there clue words in this question I should notice?
Yes — watch for: "first". Order matters here. You are being tested on which action comes before the others — not which action is generally useful.
What is the key concept behind this question?
Authentication checks who the user is.
About these practice questions
Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →
Last reviewed: Jun 18, 2026
This 300-410 practice question is part of Courseiva's free Cisco certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the 300-410 exam.
Question Discussion
Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.
Sign in to join the discussion.