- A
Place public-facing servers in the DMZ.
DMZ hosts services accessible from outside.
- B
Restrict traffic initiated from the DMZ to the inside network.
DMZ should not be allowed to initiate connections to inside.
- C
Assign the DMZ interface a security level of 0.
Why wrong: Security level 0 is for outside; DMZ typically 50.
- D
Implement strict ACLs between outside and DMZ.
Only necessary traffic should be allowed.
- E
Use the same subnet for DMZ and inside networks.
Why wrong: They should be separate subnets for segmentation.
350-701 Network Security Practice Question
This 350-701 practice question tests your understanding of network security. Read the scenario carefully and evaluate each option against the stated constraints before committing to an answer. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.
An engineer is configuring a Cisco ASA to support a DMZ segment. Which three of the following are best practices for DMZ design? (Choose three.)
Clue words in this question
Noticing these words before you look at the options changes how you read each choice.
Clue:
"best"Why it matters: Signals that multiple options may be partially correct. Choose the option that most directly solves the exact problem described, not the one that sounds most complete.
Answer choices
Why each option matters
Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.
Correct answer & explanation
Place public-facing servers in the DMZ.
DMZ should have a different security level (typically between inside and outside). Traffic from DMZ to inside should be restricted. Services in DMZ should be hardened. The DMZ interface should be a separate physical or VLAN interface.
Key principle: A trunk being up does not mean the VLAN is allowed across it. Always verify the allowed VLAN list and whether the VLAN exists on both switches.
Answer analysis
Option-by-option breakdown
For each option: why learners choose it and why it is or isn't the right answer here.
- ✓
Place public-facing servers in the DMZ.
Why this is correct
DMZ hosts services accessible from outside.
Clue confirmation
The clue word "best" in the question point toward this answer.
Related concept
Access ports place end devices into a single VLAN.
- ✓
Restrict traffic initiated from the DMZ to the inside network.
Why this is correct
DMZ should not be allowed to initiate connections to inside.
Clue confirmation
The clue word "best" in the question point toward this answer.
Related concept
Access ports place end devices into a single VLAN.
- ✗
Assign the DMZ interface a security level of 0.
Why it's wrong here
Security level 0 is for outside; DMZ typically 50.
- ✓
Implement strict ACLs between outside and DMZ.
Why this is correct
Only necessary traffic should be allowed.
Clue confirmation
The clue word "best" in the question point toward this answer.
Related concept
Access ports place end devices into a single VLAN.
- ✗
Use the same subnet for DMZ and inside networks.
Why it's wrong here
They should be separate subnets for segmentation.
Common exam traps
Common exam trap: an active trunk can still block the VLAN you need
A trunk being up does not prove every VLAN is crossing it. Check allowed VLAN lists, native VLAN mismatch, VLAN existence and access-port assignment.
Detailed technical explanation
How to think about this question
VLAN questions usually combine access-port and trunking clues. The key is to identify whether the issue is local to one switchport, caused by the trunk, or caused by the VLAN not existing where it needs to exist.
KKey Concepts to Remember
- Access ports place end devices into a single VLAN.
- Trunk ports carry multiple VLANs between switches.
- Allowed VLAN lists decide which VLANs can cross a trunk.
- Native VLAN mismatch can create confusing symptoms.
TExam Day Tips
- Use show vlan brief to verify access VLANs.
- Use show interfaces trunk to verify trunk state and allowed VLANs.
- Do not treat every same-VLAN issue as a routing problem.
Key takeaway
A trunk being up does not mean the VLAN is allowed across it. Always verify the allowed VLAN list and whether the VLAN exists on both switches.
Real-world example
How this comes up in practice
A help-desk technician troubleshoots why a newly connected PC cannot reach shared printers on the same floor. The cable is good, the switch port is active, but the PC is in VLAN 20 and the printers are in VLAN 10. The uplink trunk only allows VLAN 10. A trunk being up does not mean every VLAN crosses it.
Visual reference
What to study next
Got this wrong? Here's your next step.
Review VLAN allowed lists, native VLAN mismatch detection, and how to verify VLAN membership with show vlan brief and show interfaces trunk. Then practise related 350-701 questions on switching, trunking, and access-port configuration.
- →
Network Security — study guide chapter
Learn the concepts, then practise the questions
- →
Network Security practice questions
Targeted practice on this topic area only
- →
All 350-701 questions
988 questions across all exam domains
- →
Cisco SCOR / CCNP Security Core 350-701 study guide
Full concept coverage aligned to exam objectives
- →
350-701 practice test guide
How to use practice tests most effectively before exam day
Related practice questions
Related 350-701 practice-question pages
Use these pages to review the topic behind this question. This is how one missed question becomes focused revision.
Security Concepts practice questions
Practise 350-701 questions linked to Security Concepts.
Network Security practice questions
Practise 350-701 questions linked to Network Security.
Endpoint Security and Identity practice questions
Practise 350-701 questions linked to Endpoint Security and Identity.
Cloud Security practice questions
Practise 350-701 questions linked to Cloud Security.
Content Security practice questions
Practise 350-701 questions linked to Content Security.
Endpoint Protection and Detection practice questions
Practise 350-701 questions linked to Endpoint Protection and Detection.
Secure Network Access, Visibility and Enforcement practice questions
Practise 350-701 questions linked to Secure Network Access, Visibility and Enforcement.
350-701 fundamentals practice questions
Practise 350-701 questions linked to 350-701 fundamentals.
350-701 scenario practice questions
Practise 350-701 questions linked to 350-701 scenario.
350-701 troubleshooting practice questions
Practise 350-701 questions linked to 350-701 troubleshooting.
Practice this exam
Start a free 350-701 practice session
Short sessions build daily habit. Longer sessions build exam-day stamina. Try a timed session to simulate real conditions.
FAQ
Questions learners often ask
What does this 350-701 question test?
Network Security — This question tests Network Security — Access ports place end devices into a single VLAN..
What is the correct answer to this question?
The correct answer is: Place public-facing servers in the DMZ. — DMZ should have a different security level (typically between inside and outside). Traffic from DMZ to inside should be restricted. Services in DMZ should be hardened. The DMZ interface should be a separate physical or VLAN interface.
What should I do if I get this 350-701 question wrong?
Review VLAN allowed lists, native VLAN mismatch detection, and how to verify VLAN membership with show vlan brief and show interfaces trunk. Then practise related 350-701 questions on switching, trunking, and access-port configuration.
Are there clue words in this question I should notice?
Yes — watch for: "best". Signals that multiple options may be partially correct. Choose the option that most directly solves the exact problem described, not the one that sounds most complete.
What is the key concept behind this question?
Access ports place end devices into a single VLAN.
About these practice questions
Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →
Last reviewed: Jul 4, 2026
This 350-701 practice question is part of Courseiva's free Cisco certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the 350-701 exam.
Question Discussion
Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.
Sign in to join the discussion.