Drag steps to the numbered slots on the right, or tap a step then tap a slot.
Steps
Order
1Step 1
2Step 2
3Step 3
4Step 4
5Step 5
mediumDrag & DropObjective-mapped
CCNP Practice Question: Drag and drop the steps of STP path cost…
Drag and drop the steps of STP path cost manipulation for load balancing into the correct order, from first to last.
Answer choices
Why each option matters
Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.
Correct answer & explanation
✓
Identify redundant links in the topology
To load balance with STP, first identify redundant links. Then change the path cost on one switch's port to make it less preferred. This alters the root port selection. The switch recalculates the spanning tree, and traffic is redirected to the lower-cost path. Finally, verify the new root port and forwarding state.
Visual reference
About these practice questions
This 350-401 question is part of Courseiva's 1,175-question bank — original exam-style content with full explanations and wrong-answer analysis, never real exam questions or exam dumps. Learn why practice questions differ from exam dumps →
Same concept, more angles
1 more way this is tested on 350-401
These questions test the same concept from different angles. Work through them to make sure you can recognise it however the exam phrases it.
Variation 1. Drag and drop the steps of STP path cost manipulation for load balancing into the correct order, from first to last.
medium- ✓ A.Identify VLANs for load balancing
- ✓ B.Enter interface configuration mode
- ✓ C.Set spanning-tree vlan cost value
- ✓ D.Verify new root port selection
- ✓ E.Traffic load balanced across redundant links
Why A: Path cost manipulation adjusts the cost of a port to influence root port selection and load balance traffic. The process begins by setting the spanning-tree vlan cost value on a port to manipulate the root port selection (C). After setting the cost, verify the new root port selection to ensure the desired port is chosen (D). Subsequently, traffic is load balanced across redundant links (E). Next, enter interface configuration mode to make additional changes if needed (B). Finally, identify VLANs for load balancing to determine which VLANs will use which path (A).
JA
Written by Johnson Ajibi, MSc IT Security
Senior Network & Security Engineer · founder of Courseiva
This 350-401 practice question is part of Courseiva's free Cisco certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the 350-401 exam.