- A
VXLAN encapsulation uses a 24-bit VNI to identify the virtual network.
Correct because the VXLAN Network Identifier (VNI) is a 24-bit field that uniquely identifies a Layer 2 or Layer 3 virtual network within the fabric.
- B
The underlay network for VXLAN must be a Layer 2 switched network.
Why wrong: Incorrect because the underlay is a Layer 3 routed network (e.g., IS-IS, OSPF) that provides IP connectivity between fabric nodes.
- C
VXLAN encapsulation is performed by the fabric edge node when traffic enters the fabric.
Correct because the fabric edge encapsulates traffic from endpoints into VXLAN packets before sending them across the fabric.
- D
VXLAN provides the control plane for endpoint discovery in SD-Access.
Why wrong: Incorrect because VXLAN is only a data plane encapsulation; the control plane is provided by LISP (Locator/ID Separation Protocol).
- E
VXLAN traffic between fabric nodes can be encrypted using MACsec.
Correct because MACsec (IEEE 802.1AE) can be used to encrypt VXLAN traffic on the wire between fabric nodes for additional security.
Quick Answer
The correct answer is that VXLAN traffic between fabric nodes can be encrypted using MACsec, because VXLAN itself does not provide native encryption—it is a Layer 2 over Layer 3 encapsulation that relies on external security mechanisms like MACsec or IPsec for confidentiality. In Cisco SD-Access, VXLAN serves as the data plane encapsulation, using a 24-bit VNI to segment virtual networks, while the control plane is handled by LISP and the underlay is a routed Layer 3 network running IS-IS or OSPF. On the ENCOR 350-401 exam, this question tests your ability to distinguish VXLAN’s role from other fabric components; a common trap is assuming VXLAN provides encryption or that it operates over a Layer 2 underlay. Remember the memory tip: “VXLAN carries, LISP controls, MACsec secures”—this keeps the three planes of SD-Access distinct.
CCNP SD-Access Architecture Practice Question
This 350-401 practice question tests your understanding of sd-access architecture. Read the scenario carefully and evaluate each option against the stated constraints before committing to an answer. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.
Which three statements about VXLAN in Cisco SD-Access are true? (Choose three.)
Answer choices
Why each option matters
Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.
Correct answer & explanation
VXLAN encapsulation uses a 24-bit VNI to identify the virtual network.
VXLAN is the data plane encapsulation used in SD-Access to carry traffic across the fabric. It uses a 24-bit VNI to identify the virtual network (VN). The underlay network is typically a Layer 3 routed network using IS-IS or OSPF, not a Layer 2 network. VXLAN encapsulation is performed by the fabric edge node when traffic enters the fabric. The control plane for SD-Access uses LISP, not VXLAN itself. VXLAN does not provide encryption natively; MACsec or other encryption methods are used separately.
Key principle: OSPF neighbour adjacency depends on matching area, hello/dead timers, network type, and authentication — IP reachability alone is not enough.
Answer analysis
Option-by-option breakdown
For each option: why learners choose it and why it is or isn't the right answer here.
- ✓
VXLAN encapsulation uses a 24-bit VNI to identify the virtual network.
Why this is correct
Correct because the VXLAN Network Identifier (VNI) is a 24-bit field that uniquely identifies a Layer 2 or Layer 3 virtual network within the fabric.
Related concept
OSPF neighbours must agree on key parameters.
- ✗
The underlay network for VXLAN must be a Layer 2 switched network.
Why it's wrong here
Incorrect because the underlay is a Layer 3 routed network (e.g., IS-IS, OSPF) that provides IP connectivity between fabric nodes.
- ✓
VXLAN encapsulation is performed by the fabric edge node when traffic enters the fabric.
Why this is correct
Correct because the fabric edge encapsulates traffic from endpoints into VXLAN packets before sending them across the fabric.
Related concept
OSPF neighbours must agree on key parameters.
- ✗
VXLAN provides the control plane for endpoint discovery in SD-Access.
Why it's wrong here
Incorrect because VXLAN is only a data plane encapsulation; the control plane is provided by LISP (Locator/ID Separation Protocol).
- ✓
VXLAN traffic between fabric nodes can be encrypted using MACsec.
Why this is correct
Correct because MACsec (IEEE 802.1AE) can be used to encrypt VXLAN traffic on the wire between fabric nodes for additional security.
Related concept
OSPF neighbours must agree on key parameters.
Common exam traps
Common exam trap: OSPF can fail even when IP connectivity looks correct
OSPF neighbour formation depends on matching areas, timers, network type, authentication and passive-interface behaviour. Do not choose an answer only because the devices can ping.
Detailed technical explanation
How to think about this question
OSPF questions usually test the details that control adjacency and route selection. Read the neighbour state, area, router ID and interface configuration before deciding what is wrong.
KKey Concepts to Remember
- OSPF neighbours must agree on key parameters.
- Router ID selection can affect neighbour relationships and LSDB output.
- OSPF cost influences the preferred path.
- A route can appear in OSPF information but not become the installed route.
TExam Day Tips
- Check area mismatch first when OSPF adjacency fails.
- Review passive interfaces when a network is advertised but no neighbour forms.
- Use show ip ospf neighbor and show ip route clues carefully.
Key takeaway
OSPF neighbour adjacency depends on matching area, hello/dead timers, network type, and authentication — IP reachability alone is not enough.
Real-world example
How this comes up in practice
A network engineer at a university connects two campus buildings via a fibre link. Both routers run OSPF, but no adjacency forms — even though both routers can ping each other. The engineer finds one router is in area 0 and the other in area 1. OSPF adjacency requires matching area numbers, hello/dead timers, and network type. IP reachability alone is not enough.
What to study next
Got this wrong? Here's your next step.
Review OSPF neighbour requirements — matching area type, hello and dead timers, network type, stub flags, and authentication. Study show ip ospf neighbor states (INIT, 2-WAY, FULL). Then practise related 350-401 OSPF questions on adjacency and route selection.
- →
SD-Access Architecture — study guide chapter
Learn the concepts, then practise the questions
- →
SD-Access Architecture practice questions
Targeted practice on this topic area only
- →
All 350-401 questions
2,015 questions across all exam domains
- →
ENCOR 350-401 study guide
Full concept coverage aligned to exam objectives
- →
350-401 practice test guide
How to use practice tests most effectively before exam day
Related practice questions
Related 350-401 practice-question pages
Use these pages to review the topic behind this question. This is how one missed question becomes focused revision.
Architecture practice questions
Practise 350-401 questions linked to Architecture.
Enterprise Network Design practice questions
Practise 350-401 questions linked to Enterprise Network Design.
SD-Access Architecture practice questions
Practise 350-401 questions linked to SD-Access Architecture.
SD-WAN Architecture practice questions
Practise 350-401 questions linked to SD-WAN Architecture.
QoS Architecture practice questions
Practise 350-401 questions linked to QoS Architecture.
Virtualization practice questions
Practise 350-401 questions linked to Virtualization.
Network Function Virtualization practice questions
Practise 350-401 questions linked to Network Function Virtualization.
Virtual Machines and Hypervisors practice questions
Practise 350-401 questions linked to Virtual Machines and Hypervisors.
VRF and Path Isolation practice questions
Practise 350-401 questions linked to VRF and Path Isolation.
Infrastructure practice questions
Practise 350-401 questions linked to Infrastructure.
OSPF practice questions
Practise 350-401 questions linked to OSPF.
BGP practice questions
Practise 350-401 questions linked to BGP.
Practice this exam
Start a free 350-401 practice session
Short sessions build daily habit. Longer sessions build exam-day stamina. Try a timed session to simulate real conditions.
FAQ
Questions learners often ask
What does this 350-401 question test?
SD-Access Architecture — This question tests SD-Access Architecture — OSPF neighbours must agree on key parameters..
What is the correct answer to this question?
The correct answer is: VXLAN encapsulation uses a 24-bit VNI to identify the virtual network. — VXLAN is the data plane encapsulation used in SD-Access to carry traffic across the fabric. It uses a 24-bit VNI to identify the virtual network (VN). The underlay network is typically a Layer 3 routed network using IS-IS or OSPF, not a Layer 2 network. VXLAN encapsulation is performed by the fabric edge node when traffic enters the fabric. The control plane for SD-Access uses LISP, not VXLAN itself. VXLAN does not provide encryption natively; MACsec or other encryption methods are used separately.
What should I do if I get this 350-401 question wrong?
Review OSPF neighbour requirements — matching area type, hello and dead timers, network type, stub flags, and authentication. Study show ip ospf neighbor states (INIT, 2-WAY, FULL). Then practise related 350-401 OSPF questions on adjacency and route selection.
What is the key concept behind this question?
OSPF neighbours must agree on key parameters.
About these practice questions
Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →
Same concept, more angles
1 more ways this is tested on 350-401
These questions test the same concept from different angles. Work through them to make sure you can recognise it however the exam phrases it.
Variation 1. Which three statements about VXLAN encapsulation in Cisco SD-Access are true? (Choose three.)
hard- ✓ A.VXLAN encapsulation uses a 24-bit VNI to identify the virtual network segment.
- ✓ B.The VXLAN header in SD-Access includes a Group Policy ID field to carry the SGT.
- C.VXLAN encapsulation in SD-Access is an IP-in-IP tunneling mechanism.
- ✓ D.The outer IP destination address in the VXLAN packet is the IP address of the destination fabric node.
- E.The VNI is mapped to a VLAN at the fabric edge to provide Layer 2 connectivity for endpoints.
Why A: VXLAN in SD-Access uses a 24-bit VNI for network segmentation, and the fabric encapsulation adds a VXLAN header plus an outer IP/UDP header. The fabric uses VXLAN with Group Policy Option (GPO) to carry SGT information in the header. VXLAN is a MAC-in-UDP encapsulation, not IP-in-IP. The VNI is used to identify the virtual network (VN) and is mapped to a VLAN at the edge. The outer source IP is typically the loopback of the fabric node, not the end-user IP.
Last reviewed: Jun 18, 2026
This 350-401 practice question is part of Courseiva's free Cisco certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the 350-401 exam.
Question Discussion
Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.
Sign in to join the discussion.